Top » Catalog » Cart Contents

What's In My Cart?

Product(s)

Tool holder for rotary tools Tool holder for rotary tools

   or remove
€28.80
Collet Set for accurate use on round components Collet Set for accurate use on round components

   or remove
€457.60
Gear Chuck Gear Chuck

   or remove
€78.00
Slot cutter 5.0mm Slot cutter 5.0mm

   or remove
€4.06
Cut off/mitre saw KGS 80 Cut off/mitre saw KGS 80

   or remove
€210.00
Blade for Wood and Plastics Blade for Wood and Plastics

   or remove
€13.00
Radius Cutting Attachment, complete with pointed tool Radius Cutting Attachment, complete with pointed tool

   or remove
€61.36
Edge cutter with pin 6.4mm Edge cutter with pin 6.4mm

   or remove
€4.06
Fixed Steady Fixed Steady

   or remove
€55.60
Core box bit 3.2mm Core box bit 3.2mm

   or remove
€4.06
Rounding over cutter 6.4mm Rounding over cutter 6.4mm

   or remove
€4.06
Jig saw blades made of HSS Jig saw blades made of HSS

   or remove
€4.00
Blade for Steel and brass Blade for Steel and brass

   or remove
€13.00
Combi cutter 6.5/2.5mm Combi cutter 6.5/2.5mm

   or remove
€4.06
Scroll saw DS 230/E Scroll saw DS 230/E

   or remove
€134.00
Supercut jig saw blades of special steel Supercut jig saw blades of special steel

   or remove
€3.25
MICRO cutter MIC MICRO cutter MIC

   or remove
€71.50
Bench Circular Saw KS 230 Bench Circular Saw KS 230

   or remove
€115.50
Diamond blade for MBS 240/E Diamond blade for MBS 240/E

   or remove
€91.05
MICRO shaper MP 400 MICRO shaper MP 400

   or remove
€169.90
V-slot cutter 6.5mm V-slot cutter 6.5mm

   or remove
€4.06
Half round cutter 13mm Half round cutter 13mm

   or remove
€4.06
Slot cutter 3.2mm Slot cutter 3.2mm

   or remove
€4.06
Motor-driven carving device MSG Motor-driven carving device MSG

   or remove
€113.00
Drill chuck with sliding sleeve for the tailstock Drill chuck with sliding sleeve for the tailstock

   or remove
€35.34
Angle cutter 45 ° Angle cutter 45 °

   or remove
€4.06
Table Saw FET Table Saw FET

   or remove
€340.00
Four Jaw Chuck Four Jaw Chuck

   or remove
€189.90
Thicknesser DH 40 Thicknesser DH 40

   or remove
€499.00
Extra narrow bandsaw blade (3.5mm) for tight radii Extra narrow bandsaw blade (3.5mm) for tight radii

   or remove
€15.44
Jig saw STS 12/E Jig saw STS 12/E

   or remove
€47.50
Super jig saw STS/E Super jig saw STS/E

   or remove
€91.00
Bandsaw blade of bimetal for MBS 240/E Bandsaw blade of bimetal for MBS 240/E

   or remove
€23.98
Surface planer AH 80 Surface planer AH 80

   or remove
€304.00
MICRO woodturning lathe DB 250 MICRO woodturning lathe DB 250

   or remove
€154.06
2-speed scroll saw DSH 2-speed scroll saw DSH

   or remove
€218.50
Three jaw chuck for the lathe DB 250 Three jaw chuck for the lathe DB 250

   or remove
€126.81
MICRO Band Saw MBS 240/E MICRO Band Saw MBS 240/E

   or remove
€315.00
Five piece HSS chisel set Five piece HSS chisel set

   or remove
€67.46
MICROFLAM gas soldering set MGS MICROFLAM gas soldering set MGS

   or remove
€119.70
MICRO Screwdriver MIS 1. Complete with 16 inserts. MICRO Screwdriver MIS 1. Complete with 16 inserts.

   or remove
€147.96
Grinding mop cylinder grit 80 Grinding mop cylinder grit 80

   or remove
€16.66
MICRO-screwdrivers MICRO-screwdrivers

   or remove
€91.44
MICRO Heat gun MH 550 MICRO Heat gun MH 550

   or remove
€107.31
Universal holder UHZ Universal holder UHZ

   or remove
€69.51
Compact workshop vacuum cleaner CW-matic Compact workshop vacuum cleaner CW-matic

   or remove
€345.50
Independent four jaw chuck for the DB 250 Independent four jaw chuck for the DB 250

   or remove
€26.00
Complete Engraving Kit with trial glass Complete Engraving Kit with trial glass

   or remove
€119.40
Grinding mop cylinder grit 120 Grinding mop cylinder grit 120

   or remove
€16.66
Router base OFV Router base OFV

   or remove
€48.60
Self-adhesive white corundum sanding discs for TG 250/E Self-adhesive white corundum sanding discs for TG 250/E

   or remove
€20.32
Self-adhesive silicone carbide sanding discs for TSG 250/E Self-adhesive silicone carbide sanding discs for TSG 250/E

   or remove
€20.32
Aluminium Die-Cast Aluminium Die-Cast

   or remove
€176.80
MICROMOT extension cord. 300cm. MICROMOT extension cord. 300cm.

   or remove
€13.00
Three-jaw steel drill chuck Three-jaw steel drill chuck

   or remove
€10.56
MICROMOT drill stand MB 200 MICROMOT drill stand MB 200

   or remove
€143.08
Replacement cutting disc for MICRO cutter MIC Replacement cutting disc for MICRO cutter MIC

   or remove
€15.44
Self-adhesive white corundum sanding discs for TG 250/E Self-adhesive white corundum sanding discs for TG 250/E

   or remove
€20.32
14-piece parallel supports set 14-piece parallel supports set

   or remove
€183.72
Protective device for hand-operated MICROMOT Protective device for hand-operated MICROMOT

   or remove
€4.87
Mill/Drill Unit BFB 2000. Mill/Drill Unit BFB 2000.

   or remove
€345.52
Self-adhesive white corundum sanding discs for TG 250/E Self-adhesive white corundum sanding discs for TG 250/E

   or remove
€20.32
Self-adhesive silicone film for easy sanding disc replacement Self-adhesive silicone film for easy sanding disc replacement

   or remove
€15.44
Micro Compound Table KT 70 Micro Compound Table KT 70

   or remove
€77.64
Flexishaft MICROMOT 110/P Flexishaft MICROMOT 110/P

   or remove
€28.04
Flexishaft MICROMOT 110/BF Flexishaft MICROMOT 110/BF

   or remove
€53.64
Grinding mop cylinder grit 120 Grinding mop cylinder grit 120

   or remove
€8.33
Footswitch FS Footswitch FS

   or remove
€31.70
Hot wire cutter THERMOCUT 650 Hot wire cutter THERMOCUT 650

   or remove
€79.50
Coarse-toothed blades (No. 5: 17 teeth per 25mm) Coarse-toothed blades (No. 5: 17 teeth per 25mm)

   or remove
€7.30
Coarse-toothed blades (No. 9: 14 teeth per 25mm) Coarse-toothed blades (No. 9: 14 teeth per 25mm)

   or remove
€7.30
Coarse-toothed blades (No. 1: 50 teeth per 25mm) Coarse-toothed blades (No. 1: 50 teeth per 25mm)

   or remove
€4.45
Coarse-toothed blades (No. 5: 36 teeth per 25mm) Coarse-toothed blades (No. 5: 36 teeth per 25mm)

   or remove
€4.45
Hot wire cutter THERMOCUT 12/E Hot wire cutter THERMOCUT 12/E

   or remove
€34.50
Engraving tool GG Engraving tool GG

   or remove
€14.22
Dividing attachment TA 230 for PF 250 Dividing attachment TA 230 for PF 250

   or remove
€195.53
Coarse-toothed blades (No. 3: 34 teeth per 25mm) Coarse-toothed blades (No. 3: 34 teeth per 25mm)

   or remove
€3.65

Sub-Total: €6,732.79

Checkout

Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Service Case->
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
2 x Tool holder for rotary tools
2 x Collet Set for accurate use on round components
2 x Gear Chuck
1 x Slot cutter 5.0mm
1 x Cut off/mitre saw KGS 80
1 x Blade for Wood and Plastics
1 x Radius Cutting Attachment, complete with pointed tool
1 x Edge cutter with pin 6.4mm
1 x Fixed Steady
1 x Core box bit 3.2mm
1 x Rounding over cutter 6.4mm
1 x Jig saw blades made of HSS
1 x Blade for Steel and brass
1 x Combi cutter 6.5/2.5mm
1 x Scroll saw DS 230/E
1 x Supercut jig saw blades of special steel
1 x MICRO cutter MIC
1 x Bench Circular Saw KS 230
1 x Diamond blade for MBS 240/E
1 x MICRO shaper MP 400
1 x V-slot cutter 6.5mm
1 x Half round cutter 13mm
1 x Slot cutter 3.2mm
1 x Motor-driven carving device MSG
3 x Drill chuck with sliding sleeve for the tailstock
1 x Angle cutter 45 °
1 x Table Saw FET
1 x Four Jaw Chuck
1 x Thicknesser DH 40
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x Jig saw STS 12/E
1 x Super jig saw STS/E
1 x Bandsaw blade of bimetal for MBS 240/E
1 x Surface planer AH 80
1 x MICRO woodturning lathe DB 250
1 x 2-speed scroll saw DSH
3 x Three jaw chuck for the lathe DB 250
1 x MICRO Band Saw MBS 240/E
2 x Five piece HSS chisel set
3 x MICROFLAM gas soldering set MGS
2 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
2 x Grinding mop cylinder grit 80
3 x MICRO-screwdrivers
3 x MICRO Heat gun MH 550
3 x Universal holder UHZ
2 x Compact workshop vacuum cleaner CW-matic
1 x Independent four jaw chuck for the DB 250
3 x Complete Engraving Kit with trial glass
2 x Grinding mop cylinder grit 120
2 x Router base OFV
2 x Self-adhesive white corundum sanding discs for TG 250/E
2 x Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x Aluminium Die-Cast
2 x MICROMOT extension cord. 300cm.
2 x Three-jaw steel drill chuck
2 x MICROMOT drill stand MB 200
2 x Replacement cutting disc for MICRO cutter MIC
2 x Self-adhesive white corundum sanding discs for TG 250/E
2 x 14-piece parallel supports set
1 x Protective device for hand-operated MICROMOT
2 x Mill/Drill Unit BFB 2000.
2 x Self-adhesive white corundum sanding discs for TG 250/E
2 x Self-adhesive silicone film for easy sanding disc replacement
1 x Micro Compound Table KT 70
1 x Flexishaft MICROMOT 110/P
2 x Flexishaft MICROMOT 110/BF
1 x Grinding mop cylinder grit 120
2 x Footswitch FS
1 x Hot wire cutter THERMOCUT 650
2 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Hot wire cutter THERMOCUT 12/E
1 x Engraving tool GG
1 x Dividing attachment TA 230 for PF 250
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
€6,732.79
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
What's New?
Grinding mop cylinder grit 120
Grinding mop cylinder grit 120
€8.33
Languages
Portugues English

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online