1 x | ACCENT SERVICE TOOLS SET |
3 x | STRIPPING TOOL WITH ADJUSTABLE KNIVES |
1 x | ROTARY COAXIAL CABLE STRIPPER 3-STEPS |
1 x | 6-piece wrench key set ESD |
1 x | 6-piece screwdriver and cross-recess set ESD |
1 x | 6-piece socket wrenches ESD |
1 x | 6-piece TORX-screwdriver-set ESD |
1 x | Mini side cutters EUROline-Conductive |
1 x | PLCC Extractor |
1 x | replacement glass fibre for 2-166 Ø 4mm (PU 10) |
2 x | 6-piece screwdriver set ESD |
1 x | 6-piece set of ESD/EGB tweezers |
3 x | Footswitch FS |
2 x | PLCC Puller |
1 x | Conj 5 pinças ESD |
3 x | Spare cutting wire |
1 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
1 x | Bottom PSOP44 NOR-1 |
3 x | DIL44/PSOP44 ZIF 600 mil |
1 x | Top PSOP44 ZIF 600mil |
1 x | Screwdriver 2.5 |
4 x | Diamond Coated |
1 x | Screwdriver 2.0 |
2 x | DIL48/PQFP100 ZIF ST10-1 |
1 x | Glass fibre contact cleaner brush |
2 x | DIL48/PQFP100 ZIF PLD-1 |
1 x | Screwdriver 1.8 |
4 x | Super-Cut |
3 x | Disc Sander TG 250/E |
2 x | DIL48/PQFP144 ZIF ST10-1 |
2 x | DIL8/QFN8-1 ZIF-CS |
2 x | DIL28/QFN28-2 ZIF-CS |
2 x | DIL44/QFN44-2 ZIF-CS |
1 x | Glass fibre contact cleaner brush |
2 x | DIL48/PQFP80 ZIF M58BW-1 |
1 x | Screwdriver 1.5 |
1 x | Screwdriver 0.8 |
1 x | Screwdriver 1.2 |
1 x | Socket Wrenches 3.0 |
3 x | Tungsten Carbide Tipped (TCT) |
1 x | Socket Wrenches 1.5 |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | TORX-screwdrivers T20 |
1 x | Socket Wrenches 3.5 |
1 x | Socket Wrenches 2.0 |
1 x | Socket Wrenches 5.0 |
1 x | Socket Wrenches 3.2 |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | Socket Wrenches 2.5 |
3 x | Grinding and Polishing Machine SP/E |
1 x | Socket Wrenches 5.5 |
1 x | Socket Wrenches 4.0 |
2 x | DIL24/QSOP24 ZIF 150mil |
1 x | TORX-screwdrivers T10 |
1 x | TORX-screwdrivers T15 |
1 x | TORX-screwdrivers T10 |
1 x | Socket Wrenches 4.5 |
2 x | DIL32/PLCC32 ZIF |
2 x | DIL28/PLCC84 ZIF HS538ESC01H |
2 x | Pensander PS 13 |
3 x | Disc Sander TG 125/E |
3 x | Delta sander OZI/E |
2 x | Belt sander BS/E |
2 x | DIL20W/PLCC20 ZIF |
2 x | DIL40/PLCC68 ZIF DS87C550 |
2 x | DIL40/PLCC44 ZIF W-EPROM / MCS51 |
1 x | DIL28/PLCC32 ZIF EPROM |
2 x | BeeHive208S |
1 x | Polishing machine PM 100 |
3 x | DIL40/MLF64 ZIF-CS AVR-1 |
3 x | DIL44/MLF44-1 ZIF-CS |
2 x | DIL40/PLCC44 ZIF AWM-1 |
1 x | Angle polisher WP/E |
2 x | Long neck angle grinder LHW |
3 x | BGA-Bottom-11 |
1 x | BGA-Bottom-217 |
1 x | DIL48/SOIC20 ZIF LPC-1 |
1 x | BGA-Bottom-9 |
1 x | BGA-Bottom-22 |
1 x | BGA-Bottom-216 |
1 x | BGA-Bottom-221 |
1 x | BGA-Bottom-223 |
1 x | DIL8/SOIC8 ZIF 150mil |
3 x | BGA-0245/0242 |
3 x | BGA-0246/0244 |
3 x | BGA-Bottom-106 |
1 x | BGA-Bottom-209 |
1 x | BGA-Bottom-211 |
1 x | BGA-Bottom-2 |
1 x | DIL8/SOIC8 ZIF 200mil |
1 x | BGA-Bottom-198 |
1 x | BGA-Bottom-8 |
1 x | BGA-Bottom-202 |
1 x | BGA-Bottom-196 |
3 x | BGA-Bottom-1 |
1 x | BGA-Bottom-199 |
1 x | BGA-Top-5 ZIF-CS |
1 x | BGA-Bottom-224 |
1 x | BGA-Bottom-225 |
1 x | BGA-Top-132 ZIF-CS |
1 x | BGA-Bottom-222 |
1 x | DIL8/SOIC8-1 ZIF 170mil |
1 x | DIL8W/SOIC8 ZIF 150mil |
1 x | BGA-Bottom-204 |
1 x | BGA-Bottom-88 |
1 x | BGA-Bottom-208 |
1 x | DIL8/SOIC8 ZIF MB95-1 |
1 x | BGA-Bottom-21 |
1 x | BGA-Bottom-207 |
1 x | BGA-Bottom-214 |
3 x | BGA-Bottom-118 |
1 x | DIL48/SOIC24 ZIF MB95-1 |
1 x | BGA-Bottom-212 |
1 x | DIL8W/SOIC8 ZIF 200mil |
1 x | BGA-Bottom-5 |
3 x | BGA-Bottom-108 |
1 x | BGA-Top-4 ZIF-CS |
1 x | BGA-Top-3 ZIF-CS |
1 x | Belt sander BBS/S |
1 x | BGA-Bottom-231 |
1 x | BGA-Bottom-20 |
1 x | BGA-Bottom-177 |
1 x | BGA-Bottom-16 |
1 x | BGA-Bottom-195 |
3 x | DIL48/TQFP144 ZIF ST10-1 |
3 x | DIL48/TQFP64 ZIF HC908-1 |
1 x | BGA-Bottom-19 |
1 x | BGA-Bottom-171 |
1 x | DIL48/PLCC84 ZIF PLD-4 |
3 x | DIL44/TQFP44-3 ZIF |
3 x | DIL40/TQFP52 ZIF EM652X |
1 x | DIL48/TQFP64-2 ZIF HC908-2 |
3 x | DIL40/TQFP64 ZIF AVRmega-2 |
1 x | BGA-Bottom-169 |
3 x | sanding belts for BBS/s Grit 240 |
2 x | DIL44/TQFP44-1 Zif |
1 x | BGA-Bottom-165 |
1 x | DIL48/TQFP64-1 ZIF ST7-1 |
1 x | BGA-Bottom-180 |
1 x | BGA-Bottom-164 |
3 x | DIL40/TQFP44 ZIF PIC-1 |
2 x | BGA-Bottom-103 |
2 x | DIL32/MLF32-1 ZIF |
2 x | BGA-Bottom-125 |
3 x | DIL48/TQFP100 ZIF ST92Fxxx |
1 x | DIL48/TQFP64 ZIF HC908-2 |
1 x | BGA-Bottom-170 |
1 x | BGA-Bottom-173 |
3 x | DIL40/TQFP64 ZIF PIC-1A |
1 x | BGA-Bottom-166 |
1 x | BGA-Bottom-18 |
3 x | DIL40/TQFP44 ZIF AWM-1 |
2 x | DIL40/TQFP64 ZIF CC-1 |
2 x | DIL40/TQFP80-1 ZIF AWM-1 |
2 x | Beeprog2C |
2 x | DIL44/TQFP44-2 ZIF |
3 x | DIL40/TQFP44 ZIF EM652X |
1 x | BGA-Bottom-167 |
1 x | BGA-Bottom-187 |
2 x | BeeProg2 |
1 x | BGA-Bottom-191 |
1 x | DIL48/TQFP64-2 ZIF ST7-1 |
1 x | BGA-Bottom-174 |
2 x | BGA-Bottom-101 |
1 x | BGA-Bottom-157 |
2 x | DIL48/TQFP100 ZIF PLD-2 |
1 x | BGA-Bottom-194 |
1 x | DIL48/TQFP64 ZIF MSC1210 |
1 x | DIL40/PLCC44 ZIF PIC-1 |
1 x | DIL40/PLCC52 ZIF MCS51-2 |
1 x | DIL40/PLCC52 ZIF AWM-1 |
1 x | BGA-Bottom-126 |
1 x | BGA-Bottom-10 |
1 x | BGA-Bottom-105 |
1 x | DIL40/PLCC52 ZIF AWM-2 |
1 x | DIL40/PLCC28 ZIF AWM-1 |
1 x | DIL28/PLCC28 ZIF-CS |
1 x | DIL48/TQFP100-2 ZIF PLD-1 |
1 x | DIL40/TQFP80-1 ZIF PIC-1A |
1 x | DIL40/PLCC68 ZIF AWM-1 |
1 x | DIL20/PLCC20 ZIF-CS |
1 x | DIL28/PLCC28 ZIF |
1 x | DIL40/TQFP44-1 ZIF MCS51 |
1 x | DIL32/PLCC84 ZIF HS3334ESCF1H |
1 x | DIL48/TQFP48-1 ZIF |
1 x | BGA-0245/0241 |
2 x | DIL20W/SOIC20 ZIF 300mil |
2 x | DIL28W/SOIC28 ZIF 300mil |
2 x | DIL16/SOIC16-1 ZIF 170mil |
2 x | DIL40/SOIC20 ZIF AWM-1 |
2 x | DIL18W/SOIC18 ZIF 300mil |
2 x | DIL16W/SOIC16 ZIF 150mil |
3 x | Diamond blade for MBS 240/E |
2 x | DIL40/SOIC16 ZIF MB-1 |
2 x | Bandsaw blade of bimetal for MBS 240/E |
2 x | DIL40/SOIC28 ZIF AWM-1 |
2 x | DIL20/SOIC20 ZIF 200mil |
2 x | DIL14W/SOIC14 ZIF 150mil |
3 x | Independent four jaw chuck for the DB 250 |
3 x | Blade guides separately |
1 x | Sanding pads for OZI 220/E grit 150 |
3 x | Super-fine sanding discs grain 2000 |
2 x | DIL44/SOIC44 ZIF-CS |
1 x | DIL32/SOIC32 ZIF 300 mil |
2 x | DIL32/SOIC32 ZIF 445mil |
1 x | Polishing felt, medium hard |
2 x | DIL40/SOIC20 ZIF MB95-1 |
2 x | DIL3/SOT23-3 ZIF-CS |
2 x | DIL16/SOIC16 ZIF 200 mil |
2 x | DIL28/SOIC28 ZIF 330 mil |
2 x | DIL16W/SOIC16 ZIF 300mil |
2 x | DIL20/SOIC20 ZIF 300 mil |
2 x | Blade for Steel and brass |
2 x | DIL24W/SOIC24 ZIF 300mil |
2 x | Band knife of hardened spring band steel (without teeth) |
2 x | Backing disc for LWS |
1 x | Multiform grindstone |
1 x | MICROMOT 50/EF |
1 x | Precision Drill/Grinder FBS 240/E |
3 x | sanding belts for BBS/s Grit 150 |
2 x | sanding belts for BBS/s Grit 80 |
1 x | Supercut jig saw blades of special steel |
2 x | Super safety and specialty bit set, 75-piece |
3 x | Five piece HSS chisel set |
2 x | Special Fused Alumina (Hardness N). |
1 x | MICRO Miller FF 500 |
2 x | Three jaw chuck for the lathe DB 250 |
1 x | MICROMOT 230/E |
1 x | Drill chuck with sliding sleeve for the tailstock |
1 x | MICRO Miller FF 230 |
2 x | Mill/Drill System BFW 40/E |
1 x | Precision drill grinder FBS 12/EF |
1 x | Long neck straight drill/grinder LB/E |
1 x | Screwdriver bit set. 49-piece. |
1 x | MICROMOT Mains Adapter NG 2/S |
1 x | HSS immersion saw blades for OZI |
2 x | HSS cutting blade for OZI |
2 x | Professional set for finish grinding and polishing |
1 x | Replacement cutting wire for the THERMOCUT 12/E |
1 x | Slot cutter 6.5mm |
1 x | Sanding pads for OZI 220/E grit 240 |
1 x | Blade for Wood and Plastics |
1 x | HSS drill bits 0.5mm |
1 x | V-slot cutter 6.5mm |
2 x | Half round cutter 13mm |
1 x | HSS drill bits 1.6mm |
1 x | Slot cutter 3.2mm |
1 x | Precision steel vice PM 40 |
2 x | Super-fine sanding discs grain 000 |
1 x | Bench drill machine TBM 220 |
1 x | Sanding pads for OZI 220/E grit 80 |
2 x | HSS twist drill set with centring pin |
3 x | Conjunto de três brocas de ponto |
2 x | HSS twist drill set to DIN 338 |
2 x | Core box bit 3.2mm |
1 x | HSS drill bits 1.2mm |
1 x | Tungsten carbide drills Ø2mm |
1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
1 x | Machine Vice MS 4 |
1 x | Tungsten carbide drills Ø1,5mm |
1 x | HSS drill bits 0.8mm |
1 x | Combi cutter 6.5/2.5mm |
4 x | Tungsten carbide cutters set |
1 x | Tungsten carbide drills Ø1mm |
1 x | Rounding over cutter 6.4mm |
3 x | Step clamps made of steel |
1 x | Rebating cutter 6.4mm |
1 x | Slot cutter 5.0mm |
1 x | Angle cutter 45 ° |
1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
1 x | Edge cutter with pin 6.4mm |
1 x | Tungsten carbide cutter 2.0mm |
2 x | Cylinder shaped milling cutters |
1 x | Wolfram vanadium steel milling bits |
1 x | Felt polishers |
2 x | Diamond Grinding Bits 5mm |
2 x | Corundum grinding disc for LWS |
1 x | Boring Bar for CCMT 16mm |
2 x | Hot wire cutter THERMOCUT 650 |
1 x | Sanding Discs |
4 x | Diamond Cutting Discs |
4 x | Diamond Cutting Discs |
2 x | Wolfram vanadium steel milling bits |
2 x | Diamond Twist Drills |
2 x | Diamond Grinding Bits 1,8mm |
4 x | Diamond Cutting Discs |
2 x | Cylindrical cutters |
1 x | Tungsten carbide cutter 1.0mm |
2 x | Disc cutters |
4 x | Diamond Cutting Discs |
1 x | sclcr2525M12 |
2 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Tungsten carbide cutter 3.0mm |
2 x | Cups brushes |
2 x | Corundum fan sander for LWS |
1 x | Sanding Drums |
1 x | Cone shaped milling cutter |
1 x | 2-speed scroll saw DSH |
2 x | Hot wire cutter THERMOCUT 12/E |
1 x | Diamond blade |
1 x | Sanding Drums |
1 x | Set of special steel cutters |
1 x | Crosscut 'Super-Cut' blade |
2 x | Diamond Grinding Bits 1mm |
1 x | Cotton polishers |
1 x | SCLCR1010E06 |
1 x | Sanding bands 14x13mm |
1 x | Ball-shaped diamond coated 2.2mm |
1 x | Boring Bar for CCMT |
1 x | Thicknesser DH 40 |
1 x | MICROMOT drill stand MB 200 |
3 x | Corundum bound cutting disc for LWS |
2 x | Fibre-Cut Discs |
2 x | Corundum grinding disc for LWS |
1 x | Boring Bar for DCMT 10mm |
1 x | Replacement belts for BSL 220/E |
2 x | Corundum sanding discs for LWS |
2 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Replacement belts for BSL 220/E |
1 x | Silicon-Carbide. |
2 x | Diamond-coated cutting disc for MIC |
1 x | Cut off/mitre saw KGS 80 |
1 x | Ball-shaped diamond coated 3.2mm |
1 x | Cotton polishers |
2 x | Polishing Set |
1 x | Solid carbide stylus for engraving |
2 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
1 x | Replacement belts for BSL 220/E |
1 x | Corundum sanding discs for LWS |
2 x | Corundum fan sander for LWS |
1 x | Cotton polishers |
1 x | Solid carbide stylus for engraving |
2 x | Diamond Grinding Bits 1,8mm |
2 x | High quality corundum grinding bits |
3 x | Cutting disc, with reinforcement |
1 x | Flame shaped milling cutters |
2 x | Diamond cutting blade for OZI |
1 x | Ball shaped milling cutters |
2 x | Ball-shaped diamond coated 1.2mm |
2 x | High quality corundum grinding bits |
2 x | Fibre-Cut Discs |
1 x | Diamond-coated cutting and roughing disc |
2 x | Bench drill press TBH |
1 x | Set of precision cutters |
1 x | Boring Bar for CCMT 8mm |
1 x | Mill/Drill Unit BFB 2000. |
1 x | Parting tool 10mm |
1 x | Stainless steel wheels |
2 x | High quality corundum grinding bits |
1 x | Chuck for TBM 220 |
1 x | Three-jaw steel drill chuck |
1 x | Lathe tools 10mm pastilhados |
1 x | Aluminium Die-Cast |
2 x | Flap Wheels |
1 x | Centre Turning Attachment |
2 x | Fibre-Cut Discs |
2 x | Flexible polishing pad set |
2 x | High quality corundum grinding bits |
1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
2 x | Fibre-Cut Discs |
1 x | Replacement carving blades for MSG |
2 x | Flexible silicon discs |
1 x | Stainless steel brushes |
1 x | Engraving tool GG |
1 x | Grinding mop cylinder grit 120 |
1 x | Milling cutter set (6 - 10mm) |
1 x | Cutting tool 8 mm |
2 x | Flexible silicon discs |
1 x | Wheels brushes |
2 x | Flexible polishing pad set |
2 x | Flap Wheels |
1 x | Router base OFV |
1 x | Microfibre polishing wheel, 15-ply (100mm) |
1 x | Sanding fleece for LWS |
1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | Steel cups |
1 x | High quality corundum grinding bits |
1 x | lathe tools 10mm |
1 x | Hot wire cutter THERMOCUT 230/E |
1 x | Lambswool polishing disc |
1 x | Fluted filter for CW-matic |
1 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
1 x | Replacement glue sticks for HKP 220 |
1 x | Sanding fleece for LWS |
1 x | Steel brushes |
1 x | Lathe tools 8mm pastilhados |
1 x | HSS boring tool set, 6 pieces |
1 x | Four Jaw Chuck |
1 x | Flexible silicon discs |
1 x | Grinding mop cylinder grit 240 |
2 x | High quality corundum grinding bits |
1 x | Fibre-Cut Discs |
1 x | Cutting tool 10 mm |
1 x | Compact workshop vacuum cleaner CW-matic |
1 x | Flexishaft MICROMOT 110/BF |
1 x | lathe tools 12mm |
1 x | High quality corundum grinding bits |
1 x | High quality corundum grinding bits |
1 x | Steel wheels |
1 x | Brass brushes |
1 x | |
1 x | Universal and oil siphoning pump AP 12 |
1 x | Stainless steel cups |
1 x | Grinding mop cylinder grit 120 |
1 x | Grinding mop cylinder grit 80 |
1 x | Metal Cutting Blades |
1 x | Dividing attachment TA 230 for PF 250 |
1 x | Fibre-Cut Discs |
1 x | lathe tools 8mm |
1 x | Felt cloth polishing disc (100 x 15mm) |
1 x | Gear Chuck |
1 x | Cutting tool 16 mm |
1 x | Super-fine sanding discs grain 400 |
2 x | Milling cutter set (2 - 5mm) |
1 x | Cutting tool HM 20 mm |
![](images/pixel_black.gif) |
€69,624.87 |