4 x | Core box bit 3.2mm |
2 x | Combi cutter 6.5/2.5mm |
1 x | Sanding Drums |
4 x | 10-piece wood router cutter set |
3 x | Flap Wheels |
1 x | Sanding bands 14x13mm |
4 x | Slot cutter 6.5mm |
4 x | Edge cutter with pin 6.4mm |
4 x | Half round cutter 13mm |
2 x | Flap Wheels |
4 x | V-slot cutter 6.5mm |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
3 x | Fibre-Cut Discs |
3 x | Fluted filter for CW-matic |
2 x | Tool holder for rotary tools |
2 x | Grinding mop cylinder grit 120 |
3 x | High quality corundum grinding bits |
3 x | Replacement carving blades for MSG |
3 x | Solid carbide stylus for engraving |
2 x | Grinding mop cylinder grit 120 |
2 x | Wolfram vanadium steel milling bits |
4 x | Super-fine sanding discs grain 400 |
3 x | Radius Cutting Attachment, complete with pointed tool |
1 x | Cylinder shaped milling cutters |
2 x | Grinding mop cylinder grit 240 |
1 x | Solid carbide stylus for engraving |
2 x | Gear Chuck |
1 x | Replacement cutting disc for MICRO cutter MIC |
2 x | Engraving tool GG |
3 x | Cylindrical cutters |
3 x | Five piece HSS chisel set |
2 x | Flexible polishing pad set |
3 x | High quality corundum grinding bits |
2 x | Flexible silicon discs |
5 x | Tungsten Carbide Tipped (TCT) |
2 x | Ball shaped milling cutters |
3 x | Disc cutters |
2 x | MICROMOT extension cord. 300cm. |
2 x | Diamond cutting blade for OZI |
3 x | Flame shaped milling cutters |
3 x | Fixed Steady |
1 x | HSS boring tool set, 6 pieces |
2 x | Centre Turning Attachment |
1 x | HSS immersion saw blades for OZI |
1 x | Tungsten carbide cutter 1.0mm |
3 x | Fibre-Cut Discs |
4 x | Four Jaw Chuck |
2 x | HSS cutting blade for OZI |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Flexible polishing pad set |
4 x | Cutting disc, with reinforcement |
4 x | Lambswool polishing disc |
3 x | Fibre-Cut Discs |
2 x | Flexible silicon discs |
3 x | Tungsten carbide cutters set |
4 x | Footswitch FS |
2 x | Tungsten carbide cutter 2.0mm |
2 x | Sanding fleece for LWS |
1 x | Flexible silicon discs |
2 x | MICROMOT steel collet set |
2 x | Chuck for TBM 220 |
1 x | Steel cups |
3 x | Coarse-toothed (10 TPI per 25mm) |
1 x | Diamond Grinding Bits 1,8mm |
4 x | Blade for Steel and brass |
3 x | Slot cutter 5.0mm |
1 x | Metal Cutting Blades |
1 x | Cups brushes |
4 x | Rounding over cutter 6.4mm |
1 x | Steel wheels |
3 x | HSS immersion saw blades for OZI |
1 x | Stainless steel wheels |
2 x | Fibre-Cut Discs |
1 x | Stainless steel cups |
1 x | Stainless steel brushes |
1 x | Diamond Grinding Bits 1,8mm |
2 x | Fibre-Cut Discs |
6 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
1 x | Diamond Grinding Bits 5mm |
1 x | Protective device for hand-operated MICROMOT |
1 x | Collet Set for accurate use on round components |
1 x | HSS drill bits 1.0mm |
1 x | Aluminium Die-Cast |
1 x | 14-piece parallel supports set |
3 x | sanding belts for BBS/s Grit 80 |
6 x | Backing disc for LWS |
1 x | Tungsten carbide drills Ø2mm |
1 x | HSS drill bits 1.2mm |
1 x | Brass contact cleaner brush |
2 x | Conjunto de três brocas de ponto |
1 x | Tungsten carbide drills Ø1,5mm |
2 x | Belt sander BBS/S |
1 x | HSS drill bits 0.5mm |
1 x | HSS drill bits 0.8mm |
4 x | Diamond Coated |
4 x | sanding belts for BBS/s Grit 150 |
1 x | HSS drill bits 1.6mm |
1 x | Tungsten carbide drills Ø1mm |
2 x | HSS twist drill set to DIN 338 |
1 x | Sanding pads for OZI 220/E grit 240 |
4 x | Felt cloth polishing disc (100 x 15mm) |
2 x | Universal polishing paste |
3 x | |
3 x | Drill chuck with sliding sleeve for the tailstock |
1 x | Super safety and specialty bit set, 75-piece |
2 x | Super-Cut |
1 x | Crimping plier for BNC |
1 x | EUROline-Conductive set of pliers |
1 x | TORX-screwdrivers T4 |
2 x | Microfibre polishing wheel, 15-ply (100mm) |
1 x | Hot wire cutter THERMOCUT 650 |
3 x | Corundum grinding disc for LWS |
5 x | Polishing Set |
2 x | Silicon-Carbide. |
3 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | Hand magnifier with LED light 3X |
2 x | Corundum grinding disc for LWS |
1 x | magnifier 3.25 x Ø 45mm with additional lens |
5 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
3 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
1 x | Thicknesser DH 40 |
1 x | Hand Magnifier 2-293 |
1 x | Inspector mirror |
1 x | Glass fibre contact cleaner brush |
3 x | Corundum sanding discs for LWS |
1 x | Felt polishers |
1 x | Glass fibre contact cleaner brush |
5 x | MICROMOT Mains Adapter NG 5/E |
1 x | Spare cutting wire |
1 x | Conj 5 pinças ESD |
1 x | Diamond Cutting Discs |
3 x | Diamond blade for MBS 240/E |
1 x | Diamond-coated cutting and roughing disc |
1 x | TORX-screwdrivers T6 |
1 x | Sanding pads for OZI 220/E grit 80 |
1 x | Sanding pads for OZI 220/E grit 150 |
1 x | 6-piece wrench key set ESD |
2 x | Dividing attachment TA 230 for PF 250 |
4 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
1 x | Floor cover ESD |
1 x | TORX-screwdrivers T5 |
2 x | Hot wire cutter THERMOCUT 12/E |
1 x | TORX-screwdrivers T8 |
1 x | TORX-screwdrivers T9 |
4 x | Fine dust paper filter for CW-matic |
1 x | Independent four jaw chuck for the DB 250 |
4 x | MICROMOT Mains Adapter NG 2/S |
1 x | Supercut jig saw blades of special steel |
4 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
1 x | Fibre-Cut Discs |
1 x | IC tweezers |
2 x | Corundum sanding discs for LWS |
1 x | Inpection mirror 1-978 |
4 x | Professional set for finish grinding and polishing |
2 x | Flat nose pliers 45º EUROline-Conductive |
1 x | Diamond-coated cutting disc for MIC |
1 x | Diamond Cutting Discs |
2 x | Microfibre cloth |
1 x | Cross-recess Screwdrivers 000 |
3 x | Professional polishing sponge |
1 x | Blade holders for DS 460 |
3 x | sandpaper for PS 13 Grot 180 |
1 x | Cross-recess Screwdrivers 0 |
3 x | Coarse-toothed (25 TPI per 25mm) |
1 x | Corundum fan sander for LWS |
3 x | Precision steel vice PM 40 |
1 x | Cross-recess Screwdrivers 1 |
3 x | Spiral blade. 125mm long with plain ends (without pins). |
2 x | sandpaper for PS 13 Grit 240 |
1 x | Cross-recess Screwdrivers 00 |
3 x | Polishing felt, medium hard |
2 x | sandpaper for PS 13 Grit 400 |
1 x | MICROMOT Mains Adapter NG 2/E |
2 x | Cross-recess Screwdrivers Pozidriv 1 |
1 x | Crocodile clip |
1 x | Cross-recess Screwdrivers 1 |
1 x | Earthing module |
1 x | Earth wire |
2 x | Angle cutter 45 ° |
2 x | Sanding fleece for LWS |
1 x | End side cutters 45º EUROline-Conductive |
1 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
1 x | Earth wire |
1 x | Cross-recess Screwdrivers 2 |
1 x | Cross-recess Screwdrivers 2 |
2 x | Multiform grindstone |
2 x | Rebating cutter 6.4mm |
1 x | Set of precision cutters |
3 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
1 x | Corundum fan sander for LWS |
2 x | Cross-recess Screwdrivers Pozidriv 2 |
1 x | Tungstein carbide rasp - and cutting disc |
2 x | Micro Compound Table KT 70 |
1 x | ESD Tweezers 5-192 |
1 x | Precision caliper square |
1 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
1 x | Wrench Keys 0.7 |
1 x | Slot cutter 3.2mm |
1 x | Wrench Keys 1.3 |
1 x | PLCC Puller |
1 x | End side cutters EUROline-Conductive |
1 x | Socket Wrenches 5.5 |
1 x | Wrench Keys 1.5 |
1 x | ROTARY COAXIAL CABLE STRIPPER 3-STEPS |
3 x | Replacement cutting wire for the THERMOCUT 12/E |
1 x | Socket Wrenches 3.5 |
2 x | High quality corundum grinding bits |
2 x | High quality corundum grinding bits |
2 x | Grinding mop cylinder grit 80 |
1 x | Socket Wrenches 3.0 |
1 x | Wrench Keys 0.9 |
1 x | PLCC Extractor |
1 x | PRECISION WIRE STRIPPER ESD-PLUS |
1 x | ESD Brushe |
1 x | Socket Wrenches 2.0 |
2 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
1 x | ESD Brushe |
1 x | ESD Tweezers 5-193 |
2 x | High quality corundum grinding bits |
1 x | ESD Tweezers 5-195 |
1 x | Socket Wrenches 5.0 |
1 x | ESD Tweezers 5-191 |
2 x | High quality corundum grinding bits |
1 x | Socket Wrenches 3.2 |
1 x | Hot wire cutter THERMOCUT 230/E |
1 x | 6-piece socket wrenches ESD |
2 x | Round nose pliers 45º EUROline-Conductive |
1 x | ESD Tweezers 5-194 |
1 x | Plastic magnifying glass |
2 x | High quality corundum grinding bits |
2 x | ESD-handling set |
2 x | ESD-handling ser 9-361 |
1 x | 6-piece screwdriver and cross-recess set ESD |
3 x | Blade guides separately |
2 x | Super-fine sanding discs grain 2000 |
1 x | High quality corundum grinding bits |
1 x | Super-fine sanding discs grain 000 |
3 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
2 x | Coarse-toothed (18 TPI per 25mm) |
2 x | Tungsten tipped saw blade |
1 x | Snipe nose pliers 45º EUROline-Conductive |
3 x | Bandsaw blade of bimetal for MBS 240/E |
1 x | Replacement glue sticks for HKP 220 |
2 x | Saw blade made of high-alloy special steel |
3 x | Blade for Wood and Plastics |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | Disc Sander TG 125/E |
3 x | Band knife of hardened spring band steel (without teeth) |
2 x | Crosscut 'Super-Cut' blade |
1 x | BIT-SET |
2 x | Corundum bound cutting disc for LWS |
3 x | Solid carbide saw blade |
2 x | Machine Vice MS 4 |
1 x | Screwdriver 4.0 |
2 x | Self-adhesive white corundum sanding discs for TG 125/E |
2 x | Self-adhesive white corundum sanding discs for TG 125/E |
2 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | Wolfram vanadium steel milling bits |
1 x | Screwdriver 5.5 |
2 x | Step clamps made of steel |
1 x | Screwdriver 5.5 |
2 x | sanding belts for BBS/s Grit 240 |
2 x | Three jaw chuck for the lathe DB 250 |
2 x | MICRO Band Saw MBS 240/E |
1 x | Diamond blade |
1 x | Dial gauge |
1 x | Bench Circular Saw KS 230 |
1 x | Table Saw FET |
1 x | 6-piece TORX-screwdriver-set ESD |
2 x | Jig saw STS 12/E |
1 x | MICROMOT drill stand MB 200 |
2 x | MICRO woodturning lathe DB 250 |
1 x | Scroll saw DS 230/E |
|
€12,001.76 |