€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

BGA-0245/0241

  • special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48 
  • top board: BGA-Top-1 ZIF-CS (order no. 70-0241) 
  • bottom board: BGA-Bottom-1 (order no. 70-0245) 
  • ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness. 
  • The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board. 
  • operation life of ZIF socket - 500.000 actuations 
  • order no.: 70-0245/0241 

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil
 

Converter manual

  • Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer. 
  • Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device). 
  • Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming. 
  • Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device. 
  • To take out the device, open converter ClamShell ZIF socket and remove device from it. 
  • When you finish work with converter, remove it from the programmer ZIF socket. 
  • Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device. 
  • For handling with the device we recommended to use a vacuum pick up tool. 
  • The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

 

     



Reviews
Manufacturers
1 x High quality corundum grinding bits
1 x High quality corundum grinding bits
1 x High quality corundum grinding bits
1 x Sanding bands 14x13mm
2 x Cone shaped milling cutter
2 x Fibre-Cut Discs
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Coarse-toothed (10 TPI per 25mm)
1 x Tungsten carbide cutter 3.0mm
2 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x High quality corundum grinding bits
2 x Coarse-toothed (18 TPI per 25mm)
1 x Fibre-Cut Discs
1 x Fibre-Cut Discs
1 x Coarse-toothed (25 TPI per 25mm)
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x High quality corundum grinding bits
2 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x High quality corundum grinding bits
2 x Diamond Cutting Discs
1 x Diamond Cutting Discs
1 x sanding belts for BBS/s Grit 240
1 x Fibre-Cut Discs
1 x Set of special steel cutters
1 x Steel brushes
2 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Flexible polishing pad set
1 x lathe tools 8mm
1 x BGA-Bottom-101
1 x Slot cutter 5.0mm
2 x BGA-Bottom-105
1 x lathe tools 12mm
1 x Cotton polishers
1 x Lathe tools 10mm pastilhados
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Lathe tools 8mm pastilhados
1 x Corundum grinding disc for LWS
1 x Corundum grinding disc for LWS
1 x Cutting tool 16 mm
2 x BGA-0245/0243
1 x BGA-Bottom-1
1 x lathe tools 10mm
2 x BGA-Bottom-106
1 x BGA-Bottom-108
1 x Cut off/mitre saw KGS 80
1 x Cotton polishers
1 x BGA-Bottom-102
1 x BGA-0245/0242
1 x Core box bit 3.2mm
1 x Cotton polishers
1 x Cylinder shaped milling cutters
1 x Conjunto de três brocas de ponto
1 x Cutting disc, with reinforcement
2 x BGA-Bottom-11
2 x BeeHive208S
1 x BGA-0246/0244
2 x BGA-Bottom-115
1 x 10-piece wood router cutter set
1 x Cups brushes
2 x BeeHive204
2 x BGA-Bottom-111
1 x Corundum fan sander for LWS
1 x Corundum sanding discs for LWS
1 x Beeprog2C
1 x Cutting tool 8 mm
1 x Supercut jig saw blades of special steel
1 x Diamond Grinding Bits 1,8mm
2 x BeeProg2
1 x Replacement glue sticks for HKP 220
1 x Corundum sanding discs for LWS
1 x BGA-Bottom-10
1 x Crosscut 'Super-Cut' blade
1 x BGA-0246/0243
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Cutting tool HM 20 mm
1 x Corundum bound cutting disc for LWS
1 x Corundum fan sander for LWS
1 x Cutting tool 10 mm
1 x BGA-Bottom-103
1 x Compact workshop vacuum cleaner CW-matic
1 x Complete Engraving Kit with trial glass
1 x Combi cutter 6.5/2.5mm
1 x Chuck for TBM 220
€30,053.86
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
Elnec Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook