€395.00 + IVA

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Comentários

Categorias

Marcas

Informações

1 x	Messa de cordenadas KT 150
1 x	Disco de corte pastilhado 36 dentes
2 x	Jogo de ferros HM 10mm
2 x	Jogo de ferros 16 mm
4 x	Ferro exterior SCLCR2525 M12
3 x	Torno mecânico PD400
3 x	Fresa cilíndrica
2 x	Fresa em Tungsténio de 2 lâminas de 2.0mm
2 x	Fresas conicas
3 x	Ferro exterior SCLCR1010E06
2 x	Ferro de interior 10mm SDUCR
1 x	Ponto rotativo com pontas intermutáveis CM2
1 x	Ponto rotativo CM1
2 x	Kit de fresas finas
2 x	Bucha de coroa dentada para TBM 220
2 x	Kit de fresas pequenas
2 x	Fresas esféricas
1 x	Jogo de ferros HM 20mm
1 x	Jogo de ferros 10 mm
3 x	Ferro de interior SCLCR 10mm
1 x	Jogo de ferros HM 12mm
1 x	Ponto rotativo CM2
1 x	Jogo de ferros 8 mm
1 x	Disco de corte diamantado
2 x	Ferro de partir/cortar 10mm
1 x	Conj. Ferros 10mm pastilhados
1 x	Conjuno de 2 fresas em Tungsténio Ø2.3mm
1 x	Fresa de gravação 60º letras 0.5mm
1 x	Fresa de corte
1 x	Bucha de aperto rápido 0-16mm B16
2 x	Fresa em Tungsténio de 2 lâminas de 3.0mm
1 x	Pastilha CCGT060202-AK
1 x	Fresas cilindricas
2 x	Fresa em forma de chama
2 x	Conjuno de 3 fresas em Tungsténio Ø1.2, 2.1, 2.3mm
1 x	Fresa em Tungsténio de 2 lâminas de 1.0mm
1 x	Bucha de aperto rápido 0-13mm B16
1 x	Pastilha CCGT120404-AK
1 x	Bucha de aperto rápido 0-10mm B16
1 x	Bucha de aperto rápido 0-8mm B16
1 x	Fresa de gravação 60º letras finas
1 x	DCGT 070202F-AL
1 x	Conjunto de fresas em Tungsténio
1 x	Goiva eléctrica MSG
1 x	Disco de corte Super-Cut

€7,981.46