Steady rest for D250X550, Oficina-digital.com

Top » Catalog » Lathes » Acessories for OPTI D250X550 » 3440515

1 x	Broca de alta duração de 1.2mm
1 x	Broca de alta duração de 0.9mm
1 x	Broca de alta duração de 2.4mm
1 x	broca de alta duração de 0,6mm
1 x	BIT-SET
1 x	Broca de alta duração de 1.0mm
1 x	Broca de alta duração de 1.5mm
1 x	Broca de alta duração de 0.7mm
1 x	Broca de alta duração de 0.3mm
1 x	Broca de alta duração de 1.3mm
1 x	Broca de alta duração de 1.1mm
1 x	Broca de alta duração de 1.4mm
1 x	Broca de alta duração de 0.5mm
1 x	Broca de alta duração de 0.8mm
1 x	Broca de alta duração de 2.3mm
1 x	Broca de alta duração de 2.5mm
1 x	broca de alta duração de 0,2mm
1 x	Broca de alta duração de 2.1mm
1 x	Broca de alta duração de 2.2mm
1 x	Broca de alta duração de 2.0mm
1 x	Broca de alta duração de 0.4mm
2 x	Insulation Resistance Tester MG125
1 x	Slot cutter 6.5mm
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Slot cutter 5.0mm
1 x	10-piece wood router cutter set
1 x	Blade holders for DS 460
1 x	Combi cutter 6.5/2.5mm
1 x	Rounding over cutter 6.4mm
1 x	Tungsten Carbide Tipped (TCT)
1 x	Angle cutter 45 °
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Core box bit 3.2mm
1 x	Half round cutter 13mm
1 x	Super-Cut
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Diamond Coated
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Rebating cutter 6.4mm
1 x	V-slot cutter 6.5mm
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Slot cutter 3.2mm
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Edge cutter with pin 6.4mm
1 x	MICROFLAM gas soldering set MGS
1 x	HSS boring tool set, 6 pieces
1 x	Independent four jaw chuck for the DB 250
1 x	Grinding mop cylinder grit 120
1 x	Mill/Drill Unit BFB 2000.
1 x	Three piece thread cutting set
1 x	Precision drill grinder FBS 12/EF
1 x	Router base OFV
1 x	Dividing attachment TA 230 for PF 250
1 x	MICRO Heat gun MH 550
1 x	Fixed Steady
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	MICROMOT 50/E
1 x	Grinding mop cylinder grit 80
1 x	Micro Compound Table KT 70
1 x	Long neck straight drill/grinder LB/E
1 x	Fluted filter for CW-matic
1 x	Compact workshop vacuum cleaner CW-matic
1 x	MICROMOT 50
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Collet Set for accurate use on round components
1 x	Tool holder for rotary tools
1 x	Mill/Drill System BFW 40/E
1 x	Flexishaft MICROMOT 110/P
2 x	Lathe System PD 400
1 x	MICROMOT steel collet set
1 x	MICROFLAME burner MFB/E
1 x	MICROMOT extension cord. 300cm.
1 x	Fine dust paper filter for CW-matic
1 x	MICROMOT 50/EF
1 x	Precision Vice FMS 75
1 x	Tungsten carbide cutters set
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Grinding mop cylinder grit 240
1 x	MICRO Miller FF 500
1 x	MICROMOT 230/E
1 x	Centre Turning Attachment
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
2 x	Machine Vice MS 4
1 x	Three jaw chuck for the lathe DB 250
1 x	Four Jaw Chuck
1 x	Complete Engraving Kit with trial glass
1 x	Bench drill machine TBM 220
1 x	Spare cutting wire
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Protective device for hand-operated MICROMOT
1 x	Aluminium Die-Cast
1 x	14-piece parallel supports set
1 x	Universal holder UHZ
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Footswitch FS
1 x	Precision steel vice PM 40
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	MICRO-screwdrivers
1 x	Precision lathe PD 250/E

€10,364.92