Top » Catalog » Lathes » Optimum Lathes » 3420330

€1,860.00 + VAT

TU 2404
[3420330]

quantum D 250 x 550 - Lathes for the demanding user

Convincing arguments: quality, efficiency and price

  • Precision-manufactured
  • Concentricity precision - lathe chuck smaller than 0.05 mm
  • Concentricity precision - spindle nose smaller than 0.009 mm
  • With saddle slide, compound slide and cross slide
  • Automatic longitudinal/leadscrew drive
  • Hardened work spindle with 2 adjustable taper roller bearings
  • Taper roller bearings in P5 quality
  • Rolled trapezoid spindle
  • Thrust bearing
  • Leadscrew run on two porous bearings
  • Leadscrew for threading or automatic longitudinal feed
  • Massive, matured prismatic bed may of grey cast iron, matured at least for six months inductively hardened (HRC 42-52) and precision-ground
  • User-friendly automatic off-switch according to IP 54 with low-voltage release, EMERGENCY-STOP button and right-handed/left-handed rotation
  • High-grade lathe chuck protection
  • Manufactured according to DIN 8606 (toolmaker’s precision)
  • High value stability
     

Extent of supply:

  • 3-jaw chuck Ø 125 mm
  • Fixed centre MT2
  • Fixed centre MT3
  • Lathe chuck protection
  • Lathe dog
  • HSS cutting tools
  • Rear splash guard
  • Chip pan
  • Quadruple tool holde
  • Operating tools
  • Change gear kit 10 pcs. from 0.4 to 3 mm and inch-based (10-44 TPI) thread
  • Test certificate

Technical data

Centre height 125 mm
Distance between centres 450 mm
Turning diameter (max.) 250 mm
Spindle hole 21 mm
Spindle taper MT 3
Spindle speeds 125 - 2,000 rpm
Number of steps 6
Pitch - Metric 0.4 - 3.5 mm/rev
Pitch - Inch 10 - 44 TPI
Longitudinal feeds 0.1 - 0.2 mm/rev
Top slide travel 70 mm
Cross slide travel  120 mm
Tailstock taper MT 2
Tailstock-sleeve travel  70 mm
Motor power  750 W 230 V ~50 Hz
Dimensions (L x W x H) 1020 x 520 x 560 mm
Net weight 125 kg

Reviews
Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
  Acessories for OPTI D250X550
  Cutting tools->
  Optimum Lathes
  Optimum-Quantum accessories->
  Proxxon Lathes
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Service Case->
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
2 x High quality corundum grinding bits
3 x Top PSOP44 ZIF 600mil
1 x sandpaper for PS 13 Grot 180
1 x CRIMPING PLIERS/WIRE STRIPPER
2 x Mini side cutters EUROline-Conductive
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x sandpaper for PS 13 Grit 240
1 x Broca de alta duração de 2.2mm
2 x Mini side cutters EUROline-Conductive
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Brass contact cleaner brush
2 x V-slot cutter 6.5mm
1 x Steel wheels
2 x DIL32/TSOP32 ZIF 11.8mm
1 x Cross-recess Screwdrivers Pozidriv 2
2 x Half round cutter 13mm
3 x DIL8/SOT23-6 ZIF-CS PIC
2 x Screwdriver 2.5
1 x BIT-SET
1 x Screwdriver 1.5
2 x 6-piece screwdriver and cross-recess set ESD
1 x Screwdriver 1.8
2 x Rounding over cutter 6.4mm
1 x Cross-recess Screwdrivers 1
1 x Cross-recess Screwdrivers 2
2 x Slot cutter 5.0mm
2 x Slot cutter 3.2mm
3 x 6-piece screwdriver set ESD
2 x Crimping plier for BNC
2 x Core box bit 3.2mm
2 x DIL32/TSOP32 ZIF 18.4mm Flash
2 x Angle cutter 45 °
2 x Slot cutter 6.5mm
1 x Cross-recess Screwdrivers Pozidriv 1
2 x Edge cutter with pin 6.4mm
1 x Cups brushes
2 x 6-piece wrench key set ESD
1 x Stainless steel cups
1 x Cross-recess Screwdrivers 000
2 x DIL44/TSOP44-II ZIF 400mil
1 x Cross-recess Screwdrivers 00
2 x DIL48/TSOP56 ZIF 18.4mm Flash-2
3 x Replacement belts for BSL 220/E
2 x DIL32/TSOP32 ZIF 12.4mm Flash
1 x Screwdriver 2.0
1 x Screwdriver 1.2
1 x Blade for Wood and Plastics
1 x Cross-recess Screwdrivers 1
2 x 6-piece TORX-screwdriver-set ESD
1 x Screwdriver 3.0
2 x DIL48/TSOP56 ZIF 18.4mm Flash-5
2 x Compact workshop vacuum cleaner CW-matic
3 x Conjunto de três brocas de ponto
1 x Screwdriver 5.5
2 x DIL40/MLF64 ZIF-CS AVR-1
2 x DIL48/TSOP48 ZIF 15.4mm
1 x Screwdriver 0.8
2 x DIL40/TSOP40 ZIF 18.4mm Flash-1
1 x Stainless steel wheels
1 x Polishing paste
2 x 6-piece socket wrenches ESD
1 x Steel cups
1 x Screwdriver 4.0
1 x Cross-recess Screwdrivers 2
2 x Broca de ponto 6.30 x 2.50
1 x Hand Magnifier 2-293
2 x Precision steel vice PM 40
2 x Tungsten carbide cutters set
2 x Inspector mirror
1 x Flat nose pliers 45º EUROline-Conductive
3 x DIL40/MQFP52 ZIF ADuC812
1 x Glass fibre contact cleaner brush
2 x Bottom PSOP44 NOR-2
3 x DIL48/MQFP80 ZIF C500
2 x Bottom PSOP44 NOR-1
1 x Glass fibre contact cleaner brush
1 x magnifier 3.25 x Ø 45mm with additional lens
2 x Bottom PSOP44 NOR-3
1 x EUROline-Conductive set of pliers
2 x Machine Vice MS 4
3 x DIL48/MQFP80 ZIF C164
1 x IC tweezers
1 x Insulation Resistance Tester MG500
2 x DIL44/PSOP44 ZIF 600 mil
1 x Floor cover ESD
2 x Step clamps made of steel
1 x Inpection mirror 1-978
1 x Broca de alta duração de 2.6mm
1 x Hand magnifier with LED light 3X
1 x Socket Wrenches 5.0
1 x Grinding and Polishing Machine SP/E
2 x Cutting disc, with reinforcement
1 x Wrench Keys 1.5
1 x Wrench Keys 1.3
1 x Broca de alta duração de 2.9mm
1 x Socket Wrenches 5.5
2 x Replacement belts for BSL 220/E
1 x DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x Socket Wrenches 4.0
1 x DIL32/MLF32-1 ZIF
1 x Wrench Keys 0.7
1 x DIL28/TSOP28 ZIF 11,8mm Flash
1 x DIL48/TSOP56 ZIF 18.4mm Flash-1
2 x Replacement belts for BSL 220/E
1 x DIL28/TSOP28 ZIF 11.8 mm
1 x Socket Wrenches 2.5
1 x Wrench Keys 0.9
1 x Socket Wrenches 4.5
1 x Socket Wrenches 3.5
1 x Socket Wrenches 3.2
1 x DIL48/TSOP48 ZIF 18.4mm
1 x DIL40/TSOP40 ZIF 18.4mm
1 x Socket Wrenches 1.5
2 x 3-jaw chuck centrically clamping 80mm
1 x DIL44/MLF44-1 ZIF-CS
1 x Broca de alta duração de 2.7mm
1 x DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x Socket Wrenches 2.0
1 x Replacement belts for BSL 220/E
2 x Corundum bound cutting disc for LWS
1 x DIL40/TSOP40 ZIF-CS 12.4mm
1 x High quality corundum grinding bits
4 x centrically clamping 125mm
3 x Collet chuck ER25 for D250X550
4 x quantum revolving center CM2
3 x lathe tools 10mm
2 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
3 x Tool holder type H for SWH 1-A
3 x machine base with shelves for D250X550
1 x Delta sander OZI/E
1 x OPTI BF20 VARIO
4 x Cutting tool 10 mm
2 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x Face clamping disc for D250X550
1 x Disc cutters
1 x Scroll saw DS 230/E
3 x 3-jaw chuck centrically clamping 125mm
2 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
3 x Steady rest for D250X550
2 x DIL24/TSSOP24 ZIF 170mil
1 x 10-piece wood router cutter set
2 x TU 2004V
2 x Lathe chuck flange for D250X550
1 x Sanding Discs
1 x Felt polishers
1 x Felt polishers
3 x 14-piece parallel supports set
1 x Mill/Drill Unit BFB 2000.
4 x Morse taper MT2 - B16
2 x Tool holder type D for SWH 1-A
2 x TU 1503V
2 x CM2 - B16 - M10
2 x TU 2404
1 x Sanding Drums
1 x Sanding Drums
2 x Precision quick-action drill chuck 0-10mm B16
2 x Diamond Twist Drills
1 x Fibre-Cut Discs
1 x Protective device for hand-operated MICROMOT
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Diamond Cutting Discs
2 x Collet chuck ER32 for D250X550
1 x Fibre-Cut Discs
1 x Collet Set for accurate use on round components
1 x MICROMOT drill stand MB 200
1 x Quick-action tool holder kit SWH AA
1 x High quality corundum grinding bits
1 x Wolfram vanadium steel milling bits
1 x HSS twist drill set to DIN 338
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Wolfram vanadium steel milling bits
1 x Sanding bands 14x13mm
1 x Morse taper MT3 - B16
1 x Bench Circular Saw KS 230
2 x 4-jaw chuck individually clamping 125mm
1 x Cutting tool 16 mm
1 x Sanding Discs
1 x sclcr2525M12
1 x HSS cutting blade for OZI
1 x SCLCR1010E06
1 x Tungsten carbide drills Ø1mm
1 x Diamond Cutting Discs
1 x Professional set for finish grinding and polishing
1 x Diamond-coated cutting disc for MIC
2 x 4-jaw chuck individually clamping 100mm
1 x Super safety and specialty bit set, 75-piece
1 x High quality corundum grinding bits
1 x End milling cutter kit HSS 12 pcs
3 x centrically clamping 100mm
1 x Parting tool 10mm
1 x Hot wire cutter THERMOCUT 650
1 x Corundum grinding disc for LWS
1 x Tungsten Carbide Tipped (TCT)
1 x Complete Engraving Kit with trial glass
1 x HSS drill bits 1.6mm
1 x Lambswool polishing disc
1 x High quality corundum grinding bits
2 x Cutter head for copy and surface milling MT2
1 x HSS drill bits 1.2mm
1 x Flexible silicon discs
1 x Sanding Drums
1 x 
1 x Flexible silicon discs
1 x Thicknesser DH 40
1 x Super-Cut
1 x Corundum grinding disc for LWS
1 x Boring Bar for CCMT 8mm
1 x 3-jaw chuck centrically clamping 160mm
1 x Three piece thread cutting set
1 x Screwdriver bit set. 49-piece.
1 x Corundum sanding discs for LWS
1 x Flap Wheels
1 x Corundum sanding discs for LWS
1 x HSS drill bits 1.0mm
1 x Boring Bar for CCMT 16mm
1 x Sanding fleece for LWS
1 x DCMT070204
1 x Boring Bar for DCMT 10mm
€31,253.47
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Optimum
- Other products
What's New?
Professional set for finish grinding and polishing
Professional set for finish grinding and polishing
€27.56
Languages
Portugues English
Share Product
Share on Facebook

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online