Top » Catalog » Torque Screwdriver » 4-561

€189.50 + VAT

TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
[4-561]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 0.5 - 1.5
Scale Nm: 0.25
Fine scale mm: 0.05
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Customers who bought this product also purchased

TORX-screwdrivers T9

ESD Tweezers 5-194

ANTISTATIC 200ml

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Broca de alta duração de 2.2mm
1 x	Broca de alta duração de 1.1mm
1 x	broca de alta duração de 0,6mm
1 x	Broca de alta duração de 0.3mm
1 x	Broca de alta duração de 0.8mm
1 x	Broca de alta duração de 1.0mm
1 x	Broca de alta duração de 2.4mm
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Precision steel vice PM 40
1 x	MICROMOT glue gun HKP 220
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	MICROFLAM gas soldering set MGS
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	MICRO Heat gun MH 550
1 x	Felt cloth polishing disc (100 x 15mm)
1 x
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	HSS boring tool set, 6 pieces
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	sandpaper for PS 13 Grit 240
1 x	Multipurpose Vices Primus100
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Precision Vice FMS 75
1 x	Complete Engraving Kit with trial glass
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Disc Sander TG 125/E
1 x	Digital caliper gauge 300 mm
1 x	Five piece HSS chisel set
1 x	Delta sander OZI/E
1 x	Precision caliper square
1 x	Polishing machine PM 100
1 x	Grinding mop cylinder grit 80
1 x	Independent four jaw chuck for the DB 250
1 x	Precision caliper 500mm
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Silicon-Carbide.
1 x	Fine dust paper filter for CW-matic
1 x	Super-fine sanding discs grain 2000
2 x	Steel tape measure
1 x	Supercut jig saw blades of special steel
1 x	Special Fused Alumina (Hardness N).
1 x	Backing disc for LWS
1 x	Long neck angle grinder LHW
1 x	Diamond-coated cutting disc for MIC
1 x	Angle polisher WP/E
1 x	Lever Dial Indicator
1 x	Super-fine sanding discs grain 000
1 x	Grinding and Polishing Machine SP/E
1 x	Lambswool polishing disc
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Fluted filter for CW-matic
1 x	Magnetic base
1 x	Dial gauge
1 x	MICROMOT Mains Adapter NG 5/E

€2,228.86