Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0245/0242

€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
  Universal programmers
Service Case->
Torque Screwdriver

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

3 x	Earth wire with dummy Schunko-plug
2 x	Floor cover ESD
2 x	Crocodile clip
2 x	Round nose pliers 45º EUROline-Conductive
2 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
2 x	CRIMPING PLIERS/WIRE STRIPPER
2 x	6-piece wrench key set ESD
2 x	ESD-handling set
4 x	End side cutters EUROline-Conductive
3 x	EUROline-Conductive set of pliers
2 x	ESD-handling ser 9-361
1 x	BeeHive208S
1 x	Grinding mop cylinder grit 120
2 x	6-piece socket wrenches ESD
1 x	Conj 5 pinças ESD
4 x	Mini side cutters EUROline-Conductive
2 x	6-piece screwdriver set ESD
3 x	Cross-recess Screwdrivers 0
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
2 x	ESD Tweezers 5-191
2 x	Glass fibre contact cleaner brush
4 x	Mini side cutters EUROline-Conductive
2 x	ESD Tweezers 5-192
2 x	ESD Tweezers 5-194
2 x	Snipe nose pliers 45º EUROline-Conductive
1 x	ESD Brushe
2 x	ESD Tweezers 5-193
2 x	Glass fibre contact cleaner brush
1 x	ESD Brushe
2 x	End side cutters 45º EUROline-Conductive
2 x	ESD Tweezers 5-195
2 x	PRECISION WIRE STRIPPER ESD-PLUS
2 x	Cross-recess Screwdrivers Pozidriv 1
2 x	Cross-recess Screwdrivers Pozidriv 2
1 x	Screwdriver 4.0
2 x	Earthing module
1 x	Plastic magnifying glass
2 x	Inpection mirror 1-978
2 x	magnifier 3.25 x Ø 45mm with additional lens
2 x	Hand magnifier with LED light 3X
2 x	PLCC Puller
1 x	Screwdriver 3.0
1 x	Screwdriver 5.5
1 x	Screwdriver 5.5
2 x	Earth wire
2 x	Inspector mirror
2 x	Mini side cutters EUROline-Conductive
1 x	Precision caliper square
1 x	Crimping plier for BNC
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	Hand Magnifier 2-293
2 x	IC tweezers
4 x	Cross-recess Screwdrivers 000
1 x	Screwdriver 1.5
3 x	Cross-recess Screwdrivers 1
1 x	Screwdriver 2.0
2 x	Cross-recess Screwdrivers 00
1 x	Screwdriver 1.2
2 x	BeeHive204
3 x	Cross-recess Screwdrivers 2
2 x	Cross-recess Screwdrivers 2
1 x	Screwdriver 0.8
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Bottom PSOP44 NOR-3
1 x	2-speed scroll saw DSH
1 x	PLCC Extractor
1 x	BGA-0246/0244
1 x	Lever Dial Indicator
2 x	DIL8/QFN8-1 ZIF-CS
1 x	Earth wire
1 x	Brass contact cleaner brush
1 x	6-piece set of ESD/EGB tweezers
1 x	6-piece screwdriver and cross-recess set ESD
2 x	DIL44/TQFP44-3 ZIF
2 x	TU 1503V
2 x	Socket Wrenches 3.2
1 x	Belt sander BBS/S
2 x	Socket Wrenches 1.5
3 x	TU 2404
2 x	Cutting tool 16 mm
2 x	Cutting tool 10 mm
2 x	Socket Wrenches 5.0
2 x	BGA-Bottom-127
1 x	Socket Wrenches 2.5
2 x	BGA-Bottom-167
1 x	DIL40/TQFP44 ZIF EM652X
1 x	Socket Wrenches 4.5
1 x	Cutting tool HM 20 mm
1 x	lathe tools 8mm
1 x	Cutting tool 8 mm
1 x	Lathe tools 8mm pastilhados
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	BGA-Bottom-191
1 x	sanding belts for BBS/s Grit 240
1 x	Thicknesser DH 40
1 x	Lathe tools 10mm pastilhados
1 x	BGA-Bottom-131
3 x	Disc cutters
1 x	BGA-Bottom-115
1 x	Sanding Discs
1 x	Grinding and Polishing Machine SP/E
4 x	Tungsten carbide cutters set
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	BGA-Top-5 ZIF-CS
1 x	Broca de alta duração de 1.5mm
1 x	BGA-Bottom-164
1 x	Router base OFV
2 x	Angle cutter 45 °
1 x	Broca de alta duração de 2.1mm
1 x	Sanding Drums
2 x	TORX-screwdrivers T15
1 x	Broca de alta duração de 0.3mm
1 x	Replacement belts for BSL 220/E
1 x	Broca de alta duração de 2.2mm
2 x	Bottom PSOP44 NOR-1
1 x	Broca de alta duração de 0.7mm
1 x	BGA-Bottom-209
1 x	Broca de alta duração de 2.4mm
1 x	Slot cutter 6.5mm
1 x	Broca de alta duração de 1.0mm
1 x	Broca de alta duração de 1.3mm
1 x	BGA-0246/0243
2 x	TORX-screwdrivers T20
1 x	Broca de alta duração de 2.0mm
1 x	DIL48/SSOP56 ZIF Flash-3
1 x	broca de alta duração de 0,6mm
1 x	BGA-Bottom-199
3 x	Wolfram vanadium steel milling bits
1 x	High quality corundum grinding bits
1 x	Broca de alta duração de 1.4mm
1 x	Diamond Cutting Discs
1 x	High quality corundum grinding bits
1 x	BGA-Bottom-207
1 x	Broca de alta duração de 0.4mm
1 x	Broca de alta duração de 0.5mm
1 x	Broca de alta duração de 0.8mm
1 x	Broca de alta duração de 0.9mm
1 x	Broca de alta duração de 1.1mm
1 x	broca de alta duração de 0,2mm
1 x	Broca de alta duração de 2.5mm
1 x	Conjunto de três brocas de ponto
1 x	Tool holder for rotary tools
1 x	BGA-Bottom-211
1 x	Diamond Cutting Discs
1 x	Broca de ponto 3.15 x 1.00
2 x	Step clamps made of steel
1 x	Replacement belts for BSL 220/E
2 x	Felt polishers
1 x	Universal and oil siphoning pump AP 12
1 x	Sanding bands 14x13mm
1 x	Broca de ponto 6.30 x 2.50
1 x	Flexible silicon discs
1 x	Cylindrical cutters
1 x	Precision quick-action drill chuck 0-10mm B16
2 x	Set of precision cutters
1 x	Broca de ponto 5.00 x 2.00
1 x	BGA-Bottom-132
1 x	Cone shaped milling cutter
1 x	Broca de ponto 8.00 x 3.15
1 x	Felt polishers
1 x	Tungsten carbide cutter 2.0mm
1 x	Felt polishers
1 x	Felt polishers
3 x	Ball shaped milling cutters
1 x	Flexible silicon discs
1 x	Polishing paste
1 x	Flexible polishing pad set
1 x	Compact workshop vacuum cleaner CW-matic
2 x	Wolfram vanadium steel milling bits
2 x	Set of special steel cutters
1 x	Tungsten carbide cutter 1.0mm
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	MICROMOT 230/E
2 x	Tungsten carbide cutter 3.0mm
1 x	Bench drill machine TBM 220
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Solid carbide stylus for engraving
1 x	Cotton polishers
2 x	Flame shaped milling cutters
1 x	Broca de ponto 3.15 x 1.25
1 x	Solid carbide stylus for engraving
1 x	Lathe System PD 400
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Fibre-Cut Discs
2 x	Cross-recess Screwdrivers 1
1 x	TORX-screwdrivers T10
1 x	Diamond Cutting Discs
1 x	Three piece thread cutting set
1 x	Diamond Grinding Bits 1,8mm
1 x	TORX-screwdrivers T10

€34,630.86