Top » Catalog » Micromot tools » All others » 27490

€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
  ACCESSORIES->
  All others
  cut styrofoam
  Cutting machine
  Grinding and Polishing Machine
  Milling/Drilling Machines
  Precision Lathe
  Proxxon INDUSTRIAL
  Tool sets->
  Vices
Programmers and acessories->
Service Case->

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Tungstein carbide rasp - and cutting disc
1 x	Grinding mop cylinder grit 240
1 x	Corundum fan sander for LWS
1 x	Grinding mop cylinder grit 80
1 x	Diamond-coated cutting and roughing disc
1 x	SCLCR1010E06
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	End side cutters EUROline-Conductive
1 x	broca de alta duração de 0,2mm
1 x	Replacement cutting disc for MICRO cutter MIC
2 x	Fibre-Cut Discs
2 x	OPTI BF20 VARIO
2 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Table Sawr TKS 315 E
4 x	Protective device for hand-operated MICROMOT
2 x	MICROMOT extension cord. 300cm.
1 x	Cutting disc, with reinforcement
2 x	End mill for aluminium 4mm
1 x	OPTI BF20L VARIO
2 x	14-piece parallel supports set
2 x	Flexishaft MICROMOT 110/BF
3 x	MICROMOT tool holder
3 x	Footswitch FS
1 x	Diamond Cutting Discs
4 x	MICROMOT steel collet set
1 x	Fibre-Cut Discs
1 x	Earth wire with dummy Schunko-plug
1 x	Diamond Cutting Discs
2 x	Broca de alta duração de 2.6mm
2 x	HSS drill bits 1.6mm
1 x	Rebating cutter 6.4mm
1 x	Round nose pliers 45º EUROline-Conductive
1 x	Flexishaft MICROMOT 110/P
1 x	End mill for aluminium 3mm
1 x	Core box bit 3.2mm
2 x	HSS drill bits 1.2mm
2 x	HSS drill bits 1.0mm
1 x	Dividing attachment TA 230 for PF 250
2 x	Hand magnifier with LED light 3X
1 x	Edge cutter with pin 6.4mm
1 x	Slot cutter 3.2mm
1 x	End side cutters 45º EUROline-Conductive
2 x	Conjunto de três brocas de ponto
2 x	HSS drill bits 0.8mm
1 x	End mill for aluminium 6mm
1 x	Slot cutter 5.0mm
1 x	Grinding mop cylinder grit 120
1 x	V-slot cutter 6.5mm
2 x	Multipurpose Vices Primus 75
1 x	magnifier 3.25 x Ø 45mm with additional lens
2 x	Cotton polishers
1 x	MICROMOT Mains Adapter NG 2/S
2 x	Felt polishers
1 x	MICROMOT Mains Adapter NG 5/E
3 x	MICRO Miller FF 230
1 x	Plastic magnifying glass
1 x	Earthing module
1 x	MICROFLAME burner MFB/E
2 x	Cotton polishers
1 x	Hand Magnifier 2-293
2 x	lathe tools 10mm
1 x	HSS twist drill set with centring pin
1 x	MICRO Heat gun MH 550
2 x	Lathe tools 8mm pastilhados
1 x	MICRO-screwdrivers
1 x	Inpection mirror 1-978
2 x	Cotton polishers
1 x	HSS drill bits 0.5mm
1 x	MICROFLAM gas soldering set MGS
1 x	Tungsten carbide drills Ø1mm
1 x	Engraving tool GG
1 x	Floor cover ESD
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Tungsten carbide drills Ø2mm
1 x	Router base OFV
1 x	Universal holder UHZ
1 x	Tungsten carbide drills Ø1,5mm
1 x	Silicon-Carbide.
1 x	Half round cutter 13mm
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	MICROMOT glue gun HKP 220

€10,496.28