Precision quick-action drill chuck 0-10mm B16, Oficina-digital.com

Top » Catalog » Lathes » Optimum-Quantum accessories » drill chuck » 3050610

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
  Acessories for OPTI D250X550
  Cutting tools->
  Optimum Lathes
  Optimum-Quantum accessories->
    Chuck->
    drill chuck
    Morse taper
    Quick-action tool holder
    Revolving center
  Proxxon Lathes
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Grinding mop cylinder grit 80
1 x	Combination pliers 190mm
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	BIT-SET
1 x	Round nose pliers 185mm
1 x	ESD-handling ser 9-361
1 x	Combination pliers 185mm
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Combination pliers 210mm
1 x	Combination pliers 185mm
1 x	TIP SPT-4
1 x	TIP SPT-3
2 x	Round nose pliers 45º EUROline-Conductive
2 x	TIP SPT-9
1 x	Round nose pliers 165mm
1 x	ESD-handling set
1 x	Combination pliers 205mm
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Cross-recess Screwdrivers 0
1 x	Round nose pliers 160mm
1 x	Combination pliers 160mm
1 x	MICROMOT 50/EF
1 x	14-piece parallel supports set
1 x	Micro Compound Table KT 70
2 x	Hand magnifier with LED light 3X
1 x	Aluminium Die-Cast
1 x	Three-jaw steel drill chuck
1 x	MICROMOT tool holder
1 x	DEGRESER 200ml
1 x	Flexishaft MICROMOT 110/P
1 x	MICROMOT drill stand MB 200
1 x	Protective device for hand-operated MICROMOT
1 x	Dividing attachment TA 230 for PF 250
2 x	MICROMOT extension cord. 300cm.
1 x	MICROMOT steel collet set
2 x	6-piece screwdriver and cross-recess set ESD
1 x	FREEZER-BR 200ml
1 x	Precision drill grinder FBS 12/EF
1 x	Tungsten Carbide Tipped (TCT)
1 x	6-piece screwdriver set ESD
1 x	Diamond Coated
1 x	Ceramic-tipped tweezers and ESD 5-096
1 x	TIP SPT-10
1 x	6-piece TORX-screwdriver-set ESD
1 x	6-piece wrench key set ESD
1 x	6-piece socket wrenches ESD
1 x	EUROline-Conductive set of pliers
1 x	Cutting disc, with reinforcement
1 x	Diamond Cutting Discs
2 x	Cutting tool 8 mm
1 x	CM2 - B16 - M10
1 x	Diamond Grinding Bits 1mm
1 x	4-jaw chuck individually clamping 125mm
1 x	Stainless steel brushes
1 x	4-jaw chuck individually clamping 100mm
1 x	3-jaw chuck centrically clamping 80mm
1 x	3-jaw chuck centrically clamping 160mm
1 x	Steel tape measure
2 x	Cutting tool 10 mm
1 x	centrically clamping 125mm
1 x	Diamond Cutting Discs
1 x	Diamond Cutting Discs
1 x	Digital caliper gauge 300 mm
3 x	MICRO Miller FF 230
1 x	TIP SPT-2
1 x	End milling cutter kit HSS 12 pcs
1 x	Broca de alta duração de 2.4mm
1 x	Steel cups
1 x	Brass brushes
1 x	Stainless steel wheels
1 x	centrically clamping 100mm
1 x	Dial gauge
1 x	Steel brushes
1 x	Ceramic-tipped tweezers and ESD 5-095
1 x	Angle polisher WP/E
1 x	Wheels brushes
1 x	3-jaw chuck centrically clamping 125mm
1 x	DCMT070204
2 x	Cutting tool 16 mm
1 x	Diamond Grinding Bits 1,8mm
1 x	Ball-shaped diamond coated 2.2mm
1 x	3-jaw chuck centrically clamping 100mm
1 x	Cups brushes
2 x	Cutting tool HM 20 mm
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	HSS drill bits 1.0mm
1 x	Pensander PS 13
1 x	Broca de alta duração de 2.6mm
1 x	Rounding over cutter 6.4mm
1 x	Conjunto de três brocas de ponto
1 x	Edge cutter with pin 6.4mm
1 x	Rebating cutter 6.4mm
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	lathe tools 12mm
1 x	Sanding bands 14x13mm
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	MICRO Miller FF 500
1 x	HSS twist drill set to DIN 338
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	MICRO Miller MF 70
1 x	Sanding Drums
1 x	lathe tools 8mm
1 x	Sanding Discs
1 x	Half round cutter 13mm
1 x	V-slot cutter 6.5mm
1 x	Milling cutter set (6 - 10mm)
1 x	10-piece wood router cutter set
1 x	Tungsten carbide drills Ø1mm
1 x	Tungsten carbide drills Ø1,5mm
1 x	HSS twist drill set with centring pin
1 x	Sanding Drums
1 x	Slot cutter 6.5mm
1 x	Cutter head for copy and surface milling MT3
1 x	Lathe tools 10mm pastilhados
1 x	Flap Wheels
1 x	Angle cutter 45 °
1 x	Combi cutter 6.5/2.5mm
1 x	Sanding bands 14x13mm

€9,960.25