1 x | Fine dust paper filter for CW-matic |
1 x | Polishing felt, medium hard |
2 x | Precision quick-action drill chuck 0-10mm B16 |
1 x | 4-jaw chuck individually clamping 80mm |
2 x | Footswitch FS |
1 x | Precision quick-action drill chuck 0-16mm B16 |
1 x | Precision magnetic gauge stand |
1 x | 3-jaw chuck centrically clamping 100mm |
1 x | centrically clamping 100mm |
2 x | Precision quick-action drill chuck 0-10mm B16 |
1 x | CM2 - B16 - M10 |
1 x | Morse taper MT3 - B16 |
2 x | MICROMOT Mains Adapter NG 2/S |
1 x | 4-jaw chuck individually clamping 100mm |
1 x | Mill/Drill Unit BFB 2000. |
1 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
1 x | MICROMOT drill stand MB 200 |
1 x | MICROMOT extension cord. 300cm. |
1 x | Independent four jaw chuck for the DB 250 |
1 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
1 x | Diamond Coated |
1 x | MICROMOT steel collet set |
2 x | Tungsten Carbide Tipped (TCT) |
1 x | 14-piece parallel supports set |
1 x | Micro Compound Table KT 70 |
1 x | Special Fused Alumina (Hardness N). |
1 x | Coarse-toothed (25 TPI per 25mm) |
1 x | Coarse-toothed (18 TPI per 25mm) |
1 x | MICROMOT tool holder |
1 x | Replacement glue sticks for HKP 220 |
1 x | Polishing Set |
1 x | Flexishaft MICROMOT 110/BF |
1 x | Silicon-Carbide. |
1 x | Three jaw chuck for the lathe DB 250 |
1 x | Protective device for hand-operated MICROMOT |
1 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
1 x | Three-jaw steel drill chuck |
1 x | Drill chuck with sliding sleeve for the tailstock |
1 x | Aluminium Die-Cast |
1 x | Flexishaft MICROMOT 110/P |
1 x | Coarse-toothed (10 TPI per 25mm) |
1 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
1 x | Super-Cut |
1 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
1 x | Jig saw blades made of HSS |
1 x | MICROMOT Mains Adapter NG 2/E |
2 x | V-slot cutter 6.5mm |
1 x | Supercut jig saw blades of special steel |
2 x | Table Sawr TKS 315 E |
2 x | Core box bit 3.2mm |
1 x | Grinding mop cylinder grit 120 |
2 x | Slot cutter 6.5mm |
2 x | Edge cutter with pin 6.4mm |
1 x | Step clamps made of steel |
1 x | Machine Vice MS 4 |
2 x | 10-piece wood router cutter set |
2 x | Combi cutter 6.5/2.5mm |
2 x | Grinding mop cylinder grit 120 |
2 x | Half round cutter 13mm |
2 x | Angle cutter 45 ° |
1 x | Slot cutter 5.0mm |
1 x | Vacum SAA 901 |
2 x | Rounding over cutter 6.4mm |
1 x | Precision steel vice PM 40 |
1 x | Tungsten carbide cutters set |
1 x | Grinding mop cylinder grit 240 |
2 x | Rebating cutter 6.4mm |
2 x | Slot cutter 3.2mm |
1 x | Fixed Steady |
1 x | Collet Set for accurate use on round components |
1 x | sanding belts for BBS/s Grit 80 |
1 x | Tool holder for rotary tools |
1 x | Centre Turning Attachment |
1 x | Gear Chuck |
1 x | Radius Cutting Attachment, complete with pointed tool |
1 x | Four Jaw Chuck |
1 x | surface planing and thicknessing ADH 250 |
2 x | sanding belts for BBS/s Grit 150 |
1 x | sanding belts for BBS/s Grit 240 |
1 x | Flexible polishing pad set |
1 x | Flexible silicon discs |
1 x | Polishing paste |
1 x | Cotton polishers |
1 x | Hand Magnifier 2-293 |
3 x | MICRO Miller FF 500 |
3 x | MICRO Miller FF 230 |
2 x | Cutting disc, with reinforcement |
1 x | Felt polishers |
1 x | Felt polishers |
1 x | Flexible silicon discs |
1 x | Cotton polishers |
2 x | Cylinder sander WAS/E |
1 x | Tungstein carbide rasp - and cutting disc |
1 x | Precision drill grinder FBS 12/EF |
3 x | Long neck straight drill/grinder LB/E |
1 x | Cotton polishers |
3 x | Wood Lathe DB450 |
1 x | Table Saw TKS 2500 SC |
1 x | Flexible silicon discs |
1 x | Flexible polishing pad set |
1 x | Felt polishers |
1 x | Nylon Fleece Brushes |
1 x | Milling cutter set (6 - 10mm) |
1 x | Diamond Grinding Bits 1mm |
1 x | Sanding Discs |
1 x | Tungsten carbide drills Ø1mm |
1 x | Milling cutter set (2 - 5mm) |
1 x | Ball-shaped diamond coated 3.2mm |
1 x | Conjunto de três brocas de ponto |
1 x | surface planing and thicknessing ADH 200 |
1 x | Flap Wheels |
1 x | Diamond Grinding Bits 5mm |
1 x | HSS twist drill set to DIN 338 |
1 x | Sanding bands 14x13mm |
1 x | HSS twist drill set with centring pin |
1 x | Ball-shaped diamond coated 1.2mm |
1 x | Diamond Cutting Discs |
1 x | Sanding Drums |
1 x | Sanding bands 14x13mm |
1 x | Diamond Grinding Bits 1,8mm |
1 x | HSS drill bits 0.8mm |
1 x | Flap Wheels |
3 x | Diamond Cutting Discs |
1 x | Sanding Drums |
2 x | Diamond Cutting Discs |
1 x | Diamond Grinding Bits 1,8mm |
3 x | Warding files set, 6pcs |
1 x | Diamond Twist Drills |
1 x | HSS drill bits 1.0mm |
1 x | HSS drill bits 1.2mm |
2 x | Diamond Cutting Discs |
1 x | Tungsten carbide drills Ø2mm |
1 x | Ball-shaped diamond coated 2.2mm |
1 x | Sanding Drums |
1 x | Tungsten carbide drills Ø1,5mm |
1 x | Sanding Discs |
1 x | Sanding Drums |
1 x | Side cutters 170mm |
1 x | Fibre-Cut Discs |
2 x | Side cutters 195mm |
2 x | Mill/Drill System BFW 40/E |
1 x | CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C |
1 x | EUROline mini side cutter |
1 x | Precision Drill/Grinder FBS 240/E |
1 x | Mini side cutters EUROline-Conductive |
1 x | Fibre-Cut Discs |
1 x | EUROline mini side cutter |
3 x | replacement glass fibre for 2-166 Ø 4mm (PU 10) |
1 x | Fibre-Cut Discs |
1 x | Metal Cutting Blades |
1 x | Fibre-Cut Discs |
1 x | Mini side cutters EUROline-Conductive |
1 x | Side cutters EUROline-Conductive |
1 x | Fibre-Cut Discs |
1 x | EUROline mini side cutter |
2 x | CRIMPING PLIERS/WIRE STRIPPER |
2 x | MICROMOT 230/E |
1 x | Fibre-Cut Discs |
1 x | End side cutters 45º EUROline-Conductive |
1 x | EUROline mini side cutter |
2 x | Side cutters 160mm |
3 x | Side cutters 180mm |
3 x | Side cutters 160mm |
1 x | EUROline side cutter pointed head |
1 x | End side cutters EUROline-Conductive |
2 x | Combination pliers 185mm |
2 x | Combination pliers 160mm |
1 x | MICROFLAM gas soldering set MGS |
1 x | Hand magnifier with LED light 3X |
1 x | MICROMOT 50/E |
1 x | Router base OFV |
1 x | MICRO Miller MF 70 |
1 x | Telephon pliers straight 200mm |
1 x | MICROMOT 50/EF |
1 x | Wood Lathe DB900 |
1 x | Chuck for TBM 220 |
1 x | Long neck angle milling/drilling unit LWB 220/E |
1 x | MICROMOT 50 |
1 x | DIL48/TSOP56 ZIF 18.4mm NOR-4 |
2 x | Flat nose pliers 160mm |
1 x | Professional Drill/Grinder IBS/E |
1 x | Round nose pliers 160mm |
2 x | Motor-driven carving device MSG |
1 x | Brass contact cleaner brush |
2 x | sclcr2525M12 |
1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
1 x | Face clamping disc for D250X550 |
1 x | magnetic base 80kg |
1 x | Glass fibre contact cleaner brush |
1 x | PRECISION WIRE STRIPPER ESD-PLUS |
1 x | quantum revolving center CM2 |
1 x | broca de alta duração de 0,2mm |
1 x | Tool holder type H for SWH 1-A |
1 x | Collet chuck ER32 for D250X550 |
1 x | Cutting tool 8 mm |
1 x | Lathe tools 8mm pastilhados |
1 x | Super jig saw STS/E |
1 x | lathe tools 8mm |
1 x | Insert CCGT120404-AK |
1 x | Cutting tool HM 20 mm |
2 x | Thicknesser DH 40 |
2 x | Cut off/mitre saw KGS 80 |
3 x | TIP SPT-2 |
1 x | Morse taper MT2 - B16 |
1 x | Broca de alta duração de 2.2mm |
2 x | MICRO cutter MIC |
1 x | Insert CCGT060202-AK |
1 x | Broca de alta duração de 2.3mm |
1 x | Cutting tool 16 mm |
1 x | Broca de alta duração de 2.6mm |
2 x | MICRO shaper MP 400 |
1 x | Broca de alta duração de 2.7mm |
1 x | Broca de alta duração de 3.0mm |
1 x | Collet chuck ER25 for D250X550 |
1 x | Table Saw FET |
1 x | Hot wire cutter THERMOCUT 650 |
1 x | Cutting tool 10 mm |
1 x | Follow rest for D250X550 |
2 x | BIT-SET |
1 x | Cutter head for copy and surface milling MT3 |
2 x | Telephone pliers bent 205mm |
1 x | Lathe chuck flange for D250X550 |
2 x | Bench Circular Saw KS 230 |
1 x | TIP SPT-4 |
1 x | Quick-action tool holder kit SWH AA |
1 x | Round nose pliers 165mm |
2 x | SCLCR1010E06 |
1 x | Broca de alta duração de 2.9mm |
2 x | Wire strippers 165mm |
2 x | Telephone pliers straight 205mm |
1 x | Broca de alta duração de 2.8mm |
1 x | Broca de ponto 3.15 x 1.25 |
2 x | Precision quick-action drill chuck 0-13mm B16 |
1 x | Broca de alta duração de 2.1mm |
1 x | Combination pliers 210mm |
2 x | Jig saw STS 12/E |
1 x | Tool holder type D for SWH 1-A |
2 x | Flat nose pliers 165mm |
1 x | Revolving center with replacement lathe centers |
1 x | Surface planer AH 80 |
1 x | Precision quick-action drill chuck 0-8mm B16 |
1 x | Boring Bar for DCMT 10mm |
1 x | Boring Bar for CCMT 8mm |
1 x | Professional polishing sponge |
1 x | quantum revolving center CM1 |
1 x | Precision lathe PD 250/E |
1 x | Conj 5 pinças ESD |
1 x | Boring Bar for CCMT |
1 x | Parting tool 10mm |
2 x | IC tweezers |
1 x | PLCC Extractor |
1 x | MICRO woodturning lathe DB 250 |
1 x | Combination pliers 205mm |
1 x | Wire strippers 160mm |
1 x | Scroll saw DS 230/E |
1 x | magnifier 3.25 x Ø 45mm with additional lens |
1 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
1 x | PLCC Puller |
1 x | Safety Insulated Pozidriv Screwdriver 14-643VDE |
1 x | TIP SPT-9 |
1 x | Telephon pliers bent 200mm |
1 x | End mill for aluminium 4mm |
1 x | Beeprog2C |
1 x | Corundum fan sander for LWS |
1 x | End mill for aluminium 6mm |
|
€28,615.10 |