Warding files set, 6pcs, Oficina-digital.com

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	3-jaw chuck centrically clamping 100mm
1 x	Slot cutter 3.2mm
1 x	Chuck for TBM 220
2 x	Polishing felt, medium hard
2 x	MICRO Heat gun MH 550
1 x	centrically clamping 125mm
2 x	Complete Engraving Kit with trial glass
1 x	Morse taper MT3 - B16
1 x	4-jaw chuck individually clamping 100mm
1 x	10-piece wood router cutter set
1 x	sanding belts for BBS/s Grit 150
1 x	Fixed Steady
1 x	Centre Turning Attachment
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Rounding over cutter 6.4mm
1 x	Precision quick-action drill chuck 0-16mm B16
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Morse taper MT2 - B16
1 x	Gear Chuck
1 x	Angle cutter 45 °
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	4-jaw chuck individually clamping 125mm
1 x	Tungsten Carbide Tipped (TCT)
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	sanding belts for BBS/s Grit 240
1 x	MICROMOT glue gun HKP 220
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	Rebating cutter 6.4mm
1 x	Five piece HSS chisel set
1 x	3-jaw chuck centrically clamping 160mm
1 x	Cutting disc, with reinforcement
1 x	3-jaw chuck centrically clamping 125mm
1 x	Tool holder for rotary tools
1 x	CM2 - B16 - M10
1 x	Precision magnetic gauge stand
1 x	Four Jaw Chuck
1 x	Combi cutter 6.5/2.5mm
1 x	Collet Set for accurate use on round components
1 x	Half round cutter 13mm
2 x	Universal holder UHZ
1 x	4-jaw chuck individually clamping 80mm
1 x	3-jaw chuck centrically clamping 80mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Independent four jaw chuck for the DB 250
1 x	Lathe System PD 400
1 x	Sanding pads for OZI 220/E grit 240
1 x	MICRO Band Saw MBS 240/E
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Blade holders for DS 460
2 x	Motor-driven carving device MSG
2 x	Super jig saw STS/E
1 x	Corundum fan sander for LWS
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
2 x	Surface planer AH 80
2 x	Table Saw FET
1 x	MICRO cutter MIC
1 x	Tungsten tipped saw blade
1 x	HSS boring tool set, 6 pieces
1 x	Warding files set, 6pcs
1 x	Precision lathe PD 250/E
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Sanding pads for OZI 220/E grit 80
1 x	Super-fine sanding discs grain 2000
1 x	HSS immersion saw blades for OZI
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Engraving tool GG
1 x	HSS immersion saw blades for OZI
2 x	Thicknesser DH 40
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Three piece thread cutting set
1 x	Blade for Wood and Plastics
1 x	Silicon-Carbide.
1 x	Bench Circular Saw KS 230
1 x	Special Fused Alumina (Hardness N).
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Blade guides separately
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Footswitch FS
1 x	Spare cutting wire
1 x	Microfibre cloth
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	MICROFLAME burner MFB/E
1 x	Cut off/mitre saw KGS 80
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Replacement glue sticks for HKP 220
1 x	Solid carbide saw blade
1 x	Scroll saw DS 230/E
1 x	Coarse-toothed (18 TPI per 25mm)
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Super-fine sanding discs grain 000
1 x	MICRO shaper MP 400
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Polishing Set
1 x	MICRO-screwdrivers
1 x	2-speed scroll saw DSH

€9,815.07

Quick Find

We Accept

Manufacturer Info


-	BERNSTEIN Homepage
-	Other products

What's New?

Professional set for finish grinding and polishing
€27.56

Languages

Share Product

Self-adhesive white corundum sanding discs for TG 125/E	Disc Sander TG 125/E	MICROMOT drill stand MB 200
Self-adhesive white corundum sanding discs for TG 125/E	Grinding and Polishing Machine SP/E	HSS twist drill set to DIN 338

€14.30 + VAT

Warding files set, 6pcs
[5-240]

€14.30 + VAT

Warding files set, 6pcs[5-240]

Warding files set, 6pcs
[5-240]