Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0254/0241

€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
    submodule
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Broca de alta duração de 0.9mm
1 x	Antiallergical Tweezers 5-107-1
1 x	Cutting tool 8 mm
1 x	Cutting tool HM 20 mm
1 x	Cutting tool 10 mm
2 x	Cutter head for copy and surface milling MT3
1 x	Broca de alta duração de 2.5mm
1 x	Broca de alta duração de 1.2mm
1 x	Broca de alta duração de 2.0mm
1 x	Broca de alta duração de 1.3mm
1 x	Broca de alta duração de 0.3mm
2 x	TORX-screwdrivers T20
1 x	Broca de alta duração de 2.4mm
1 x	Grinding mop cylinder grit 80
1 x	Broca de alta duração de 2.1mm
1 x	TORX-screwdrivers T10
1 x	Cutter head for copy and surface milling MT2
1 x	Broca de alta duração de 2.2mm
1 x	TORX-screwdrivers T10
1 x	Antiallergical Tweezers 5-155-1
1 x	Antiallergical Tweezers 5-121-1
1 x	Broca de alta duração de 1.0mm
1 x	Broca de alta duração de 1.1mm
1 x	Antiallergical Tweezers 5-117-1
1 x	Broca de alta duração de 1.5mm
1 x	Digital caliper gauge 300 mm
1 x	broca de alta duração de 0,6mm
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	TOP-PIN 200ml
2 x	Combi cutter 6.5/2.5mm
1 x	Blade guides separately
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x	Rebating cutter 6.4mm
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Safety insulated screwdrivers 14-608 VDE
1 x	Safety insulated screwdrivers 14-606 VDE
3 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Collet Set for accurate use on round components
2 x	Coarse-toothed (18 TPI per 25mm)
1 x	SPRAYFLON 200ml
1 x	Centre Turning Attachment
1 x	VASELINE 200ml
3 x	Blade holders for DS 460
2 x	Cylinder sander WAS/E
1 x	PROTECTION 200ml
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	SILICONE 200ml
2 x	Slot cutter 6.5mm
1 x	Slot cutter 5.0mm
1 x	sandpaper for PS 13 Grit 240
1 x	Half round cutter 13mm
1 x	SPRAYOIL 200ml
1 x	Blade for Wood and Plastics
2 x	Rounding over cutter 6.4mm
2 x	Core box bit 3.2mm
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	sandpaper for PS 13 Grot 180
1 x	Chuck for TBM 220
1 x	Coarse-toothed (25 TPI per 25mm)
3 x	Angle cutter 45 °
2 x	Tungsten Carbide Tipped (TCT)
1 x	Cutting disc, with reinforcement
1 x	FREEZER-TOP 200ml
1 x	Edge cutter with pin 6.4mm
1 x	10-piece wood router cutter set
1 x	V-slot cutter 6.5mm
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
2 x	Broca de alta duração de 2.9mm
1 x	VIDEOCLEAN 200ml
2 x	TUNER 200ml
1 x	Blade for Steel and brass
1 x	Microfibre polishing wheel, 15-ply (100mm)
2 x	Universal and oil siphoning pump AP 12
2 x	Replacement carving blades for MSG
1 x	Safety Insulated Pozidriv Screwdriver 14-644VDE
2 x	Broca de alta duração de 2.8mm
1 x	SmartProg2
2 x	Tungsten carbide cutters set
2 x	Coarse-toothed (10 TPI per 25mm)
1 x	Lathe System PD 400
1 x	Step clamps made of steel
2 x	Precision steel vice PM 40
1 x	Precision lathe PD 250/E
1 x	Machine Vice MS 4
1 x	DIL16W/SOIC16 ZIF 150mil
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	DIL48/PLCC52 ZIF-CS 68HC11
1 x	Mini side cutters EUROline-Conductive
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	End side cutters 45º EUROline-Conductive
1 x	Bottom PSOP44 NOR-1
2 x	BeeProg2
1 x	DIL40/SOIC16 ZIF MB-1
1 x	EUROline-Conductive set of pliers
1 x	DIL48/SOIC24 ZIF MB95-1
1 x	High quality corundum grinding bits
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	Round nose pliers 45º EUROline-Conductive
1 x	High quality corundum grinding bits
1 x	DIL40/SOIC20 ZIF MB95-1
2 x	Bottom PSOP44 NOR-2
1 x	DIL48/PLCC52 ZIF-CS 68HC05BX
1 x	DIL18W/SOIC18 ZIF 300mil
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
1 x	lathe tools 8mm
1 x	End side cutters EUROline-Conductive
1 x	Side cutters EUROline-Conductive
1 x	Sanding bands 14x13mm
1 x	CD-CLEANER 200ml
1 x	Belt sander BS/E
1 x	lathe tools 12mm
1 x	FREEZER-BR 200ml
1 x	SCMT060204
2 x	Disc Sander TG 125/E
1 x	BeeHive204
1 x	BGA-Bottom-115
1 x	Grinding and Polishing Machine SP/E
2 x	Disc Sander TG 250/E
1 x	FLUX-OFF 400ml
1 x	Cross-recess Screwdrivers Pozidriv 1
1 x	Pensander PS 13
1 x	BGA-Bottom-105
1 x	BGA-Bottom-11
1 x	BeeHive208S
1 x	BGA-Bottom-108
1 x	EUROline snipe nose pliers
1 x	BGA-Bottom-101
1 x	BGA-Bottom-1
1 x	BGA-0246/0244
1 x	PROLUB 200ml
1 x	Broca de alta duração de 3.0mm
1 x	BGA-Bottom-106
1 x	DEGRESER 200ml
2 x	BGA-Bottom-102
1 x	ANTISTATIC 200ml
1 x	SCREEN 200ml
1 x	Broca de alta duração de 2.6mm
1 x	Screwdriver bit set. 49-piece.
1 x	POLISHER 200ml
2 x	Belt sander BBS/S
1 x	Super safety and specialty bit set, 75-piece
1 x	BGA-0245/0241
1 x	SCMT09T304
1 x	Delta sander OZI/E
1 x	Angle polisher WP/E
1 x	BGA-0246/0243
1 x	BGA-Bottom-111
1 x	Multiform grindstone
1 x	BGA-Bottom-103
1 x	DUSTER-BR 200ml
1 x	Polishing machine PM 100
1 x	BGA-Bottom-141
1 x	BGA-Bottom-208
1 x	BGA-Bottom-15
1 x	BGA-Bottom-9
1 x	BGA-0245/0242
1 x	BGA-Bottom-145
1 x	High quality corundum grinding bits
1 x	BGA-Bottom-212
1 x	BGA-Bottom-118
1 x	BGA-Bottom-138
1 x	BGA-Top-4 ZIF-CS
1 x	BGA-Bottom-211
1 x	BGA-Bottom-127
1 x	BGA-Bottom-196
1 x	Precision magnetic gauge stand
1 x	BGA-Bottom-224
1 x	BGA-Bottom-218
1 x	BGA-Bottom-225
1 x	Component tweezers 5-013
1 x	BGA-Bottom-10
1 x	BGA-Bottom-229
1 x	BGA-Bottom-22
1 x	BGA-Bottom-199
1 x	BGA-Bottom-195

€27,742.46