€7,540.00 + VAT

BeeHive208S
[60-0054]

BeeHive208S

BeeHive208S

Extremely fast universal 8x 48-pin-drive Stand-Alone concurrent Production Programmer ( multiprogramming system )

 
Elnec fully understand needs of customers programming high volumes for which cost of adapters is one of most important component of costs. Therefore Elnec policy is to offer:

Short description:

  • supported devices from manufacturers by 2.76 version of SW (27. Jan. 2011)
  • eight independent universal programming modules (BeeProg2 based) in one unit
  • extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory in less than 9 seconds and 1Gbit NAND Flash in less than 70 sec.
  • powerful independent pin-driver circuit for each and every pin of the programmer
  • in-circuit programming capability through ISP connector
  • graphics control unit with touch screen
  • very low voltage support for the latest Flash memory chips
  • ESD protection on each pin of the sockets
  • no adapter required for any DIL devices
  • Windows XP Embedded driven control PC internal to the programmer
  • unique quick reaction to customer\'s needs - software update can be ready within a day from request by OnDemand software
  • made in Slovakia
  • warranty - 3 years

Please see the full information in http://www.elnec.com/products/production-programmers/beehive208s/

 


Reviews
Manufacturers
2 x Centre Turning Attachment
3 x Conjunto de três brocas de ponto
2 x Broca de ponto 8.00 x 3.15
1 x Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x Self-adhesive white corundum sanding discs for TG 250/E
2 x Broca de ponto 6.30 x 2.50
2 x Broca de ponto 5.00 x 2.00
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Self-adhesive silicone film for easy sanding disc replacement
1 x Coarse-toothed (18 TPI per 25mm)
1 x Glass fibre contact cleaner brush
1 x Broca de ponto 3.15 x 1.00
1 x Broca de ponto 3.15 x 1.25
1 x MICROMOT Mains Adapter NG 2/S
2 x Collet Set for accurate use on round components
2 x Tungsten carbide cutter 1.0mm
2 x Broca de alta duração de 0.4mm
1 x Broca de alta duração de 0.9mm
1 x Fibre-Cut Discs
2 x Wolfram vanadium steel milling bits
3 x Broca de alta duração de 0.7mm
2 x broca de alta duração de 0,6mm
1 x BeeHive204
2 x Set of precision cutters
1 x Fibre-Cut Discs
2 x Tungsten carbide cutter 3.0mm
3 x High quality corundum grinding bits
1 x Fibre-Cut Discs
2 x Cylindrical cutters
1 x Diamond Cutting Discs
3 x Broca de alta duração de 2.3mm
2 x Cylinder shaped milling cutters
2 x High quality corundum grinding bits
2 x Broca de alta duração de 1.5mm
2 x High quality corundum grinding bits
1 x Broca de alta duração de 2.5mm
1 x MICROMOT Mains Adapter NG 5/E
2 x Broca de alta duração de 2.0mm
1 x Diamond Cutting Discs
1 x Replacement cutting wire for the THERMOCUT 12/E
2 x High quality corundum grinding bits
2 x High quality corundum grinding bits
2 x BeeProg2
1 x Steel brushes
3 x Broca de alta duração de 2.2mm
3 x Broca de alta duração de 1.2mm
3 x High quality corundum grinding bits
2 x Disc cutters
2 x Tungsten carbide cutters set
2 x Solid carbide stylus for engraving
3 x Broca de alta duração de 0.8mm
3 x Broca de alta duração de 1.1mm
1 x Tungsten carbide cutter 2.0mm
1 x Broca de alta duração de 1.3mm
2 x Set of special steel cutters
1 x Fibre-Cut Discs
2 x Broca de alta duração de 0.5mm
1 x Milling cutter set (2 - 5mm)
2 x Wolfram vanadium steel milling bits
2 x Broca de alta duração de 2.4mm
1 x Milling cutter set (6 - 10mm)
2 x Broca de alta duração de 0.3mm
3 x Broca de alta duração de 2.1mm
3 x High quality corundum grinding bits
2 x Solid carbide stylus for engraving
1 x HSS drill bits 0.8mm
1 x Four Jaw Chuck
1 x Felt polishers
1 x Flame shaped milling cutters
1 x Cone shaped milling cutter
1 x HSS drill bits 1.6mm
1 x HSS twist drill set with centring pin
1 x Flexible silicon discs
1 x Fine dust paper filter for CW-matic
1 x HSS drill bits 1.2mm
1 x Flexible polishing pad set
1 x Broca de alta duração de 1.0mm
1 x Felt polishers
1 x Sanding bands 14x13mm
1 x Flexible silicon discs
1 x Radius Cutting Attachment, complete with pointed tool
1 x Tungsten carbide drills Ø2mm
1 x Blade holders for DS 460
1 x Sanding bands 14x13mm
1 x sanding belts for BBS/s Grit 240
2 x High quality corundum grinding bits
1 x Tungsten carbide drills Ø1,5mm
1 x Gear Chuck
1 x Beeprog2C
1 x Flexible silicon discs
1 x HSS twist drill set to DIN 338
1 x Flexible polishing pad set
1 x Felt polishers
€8,090.56
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Elnec
Elnec Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook