Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0245/0242

€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
    submodule
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	sandpaper for PS 13 Grot 180
1 x	Drill chuck with sliding sleeve for the tailstock
2 x	MICROMOT Mains Adapter NG 5/E
1 x	14-piece parallel supports set
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Compact workshop vacuum cleaner CW-matic
1 x	MICROMOT extension cord. 300cm.
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Fine dust paper filter for CW-matic
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Core box bit 3.2mm
2 x	MICROMOT Mains Adapter NG 2/S
2 x	Belt sander BS/E
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Complete Engraving Kit with trial glass
1 x	Four Jaw Chuck
1 x	Diamond blade for MBS 240/E
1 x	Blade guides separately
1 x	Long neck angle grinder LHW
1 x	Replacement carving blades for MSG
1 x	sandpaper for PS 13 Grit 240
1 x	Universal holder UHZ
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	MICROMOT drill stand MB 200
1 x	Diamond-coated cutting disc for MIC
1 x	Cylinder sander WAS/E
1 x	V-slot cutter 6.5mm
1 x	Plastic magnifying glass
1 x	Gear Chuck
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Saw blade made of high-alloy special steel
1 x	Five piece HSS chisel set
2 x	Micro Compound Table KT 70
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Hand magnifier with LED light 3X
1 x	Flexishaft MICROMOT 110/BF
1 x	Hot wire cutter THERMOCUT 650
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Delta sander OZI/E
1 x	Lathe System PD 400
1 x	Aluminium Die-Cast
1 x	Blade holders for DS 460
1 x	Rounding over cutter 6.4mm
1 x	HSS boring tool set, 6 pieces
1 x	Solid carbide saw blade
1 x	Half round cutter 13mm
1 x	10-piece wood router cutter set
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Engraving tool GG
1 x	Grinding mop cylinder grit 120
1 x	Polishing machine PM 100
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	MICROMOT tool holder
1 x	Rebating cutter 6.4mm
1 x	Super-Cut
1 x	Slot cutter 6.5mm
1 x	Coarse-toothed (18 TPI per 25mm)
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Disc Sander TG 250/E
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Chuck for TBM 220
1 x	Fixed Steady
1 x	Pensander PS 13
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Tungsten tipped saw blade
1 x	Slot cutter 3.2mm
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	MICROFLAM gas soldering set MGS
1 x	Edge cutter with pin 6.4mm
1 x	Belt sander BBS/S
1 x	MICROFLAME burner MFB/E
1 x	Diamond blade
1 x	Collet Set for accurate use on round components
1 x	Crosscut 'Super-Cut' blade
1 x	Grinding mop cylinder grit 240
2 x	Footswitch FS
1 x	Mill/Drill Unit BFB 2000.
1 x	Tungstein carbide rasp - and cutting disc
1 x	Slot cutter 5.0mm
1 x	MICRO-screwdrivers
1 x	Three piece thread cutting set
1 x	Independent four jaw chuck for the DB 250
1 x	Router base OFV
1 x	Spare cutting wire
1 x	Fluted filter for CW-matic
1 x	sanding belts for BBS/s Grit 80
1 x	Three-jaw steel drill chuck
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Dividing attachment TA 230 for PF 250
1 x	Protective device for hand-operated MICROMOT
1 x	Flexishaft MICROMOT 110/P
1 x	Tool holder for rotary tools
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
2 x
1 x	Angle cutter 45 °
1 x	Precision lathe PD 250/E
1 x	sandpaper for PS 13 Grit 400
1 x	Disc Sander TG 125/E
1 x	Three jaw chuck for the lathe DB 250
1 x	Grinding and Polishing Machine SP/E
2 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Universal polishing paste
1 x	Diamond Coated
1 x	Blade for Wood and Plastics
2 x	Tungsten Carbide Tipped (TCT)
1 x	Combi cutter 6.5/2.5mm
1 x	Multiform grindstone
1 x	Hand Magnifier 2-293
1 x	MICRO Heat gun MH 550
1 x	Angle polisher WP/E
1 x	Grinding mop cylinder grit 80
1 x	MICROMOT glue gun HKP 220
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	sanding belts for BBS/s Grit 240
1 x	Blade for Steel and brass
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Grinding mop cylinder grit 120
1 x	Centre Turning Attachment
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	MICROMOT steel collet set
1 x	sanding belts for BBS/s Grit 150
1 x	BGA-Bottom-195
1 x	BGA-Bottom-157
1 x	DIL40/SDIP52 ZIF 55x
1 x	BGA-Bottom-187
1 x	BGA-Bottom-174
1 x	Ceramic-tipped tweezers and ESD 5-096
1 x	BGA-Bottom-191
1 x	Mini side cutters EUROline-Conductive
1 x	EUROline-Conductive set of pliers
1 x	Jig saw blades made of HSS
1 x	Super jig saw STS/E
1 x	Polishing felt, medium hard
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Diamond cutting blade for OZI
1 x	BGA-Bottom-180
1 x	HSS immersion saw blades for OZI
1 x	Motor-driven carving device MSG
2 x	DIL32/SDIP64-1 ZIF Toshiba-BM1136
1 x	Telephon pliers straight 200mm
1 x	Machine Vice MS 4
1 x	Mini side cutters EUROline-Conductive
1 x	MICROMOT 50/EF
1 x	Jig saw STS 12/E
1 x	Telephon pliers bent 160mm
1 x	Bench Circular Saw KS 230
1 x	Backing disc for LWS
1 x	Inspector mirror
1 x	Sanding fleece for LWS
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Ball-shaped diamond coated 1.2mm
1 x	Ball shaped milling cutters
1 x	Corundum sanding discs for LWS
1 x	BGA-Bottom-16
2 x	DIL42/SDIP42 ZIF 600mil
1 x	Ball-shaped diamond coated 2.2mm
1 x	Corundum grinding disc for LWS
1 x	Scroll saw DS 230/E
1 x	Beeprog2C
1 x	DIL32/SDIP32 ZIF 400mil
1 x	Sanding fleece for LWS
1 x	DIL28/QFN28-2 ZIF-CS
1 x	Wire strippers 160mm
1 x	Replacement glue sticks for HKP 220
1 x	Surface planer AH 80
1 x	Combination pliers 205mm
1 x	MICRO Miller MF 70
1 x	BGA-Bottom-192
1 x	BeeProg2
2 x	2-speed scroll saw DSH
1 x	BGA-Bottom-167
1 x	Side cutters 160mm
1 x	Special Fused Alumina (Hardness N).
1 x	Cut off/mitre saw KGS 80
1 x	Round nose pliers 160mm
1 x	Ceramic-tipped tweezers and ESD 5-095
1 x	DIL48/SDIP56 ZIF 68HC05Bx
1 x	Replacement belts for BSL 220/E
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Combination pliers 160mm
1 x	Conj 5 pinças ESD
1 x	DIL32/SDIP64 ZIF H8-1
1 x	BGA-Bottom-194
1 x	Corundum sanding discs for LWS
1 x	Super-fine sanding discs grain 000
1 x	Tungsten carbide cutters set
1 x	Inpection mirror 1-978
1 x	Earthing module
1 x	Earth wire
1 x	Precision steel vice PM 40
1 x	DIL40/MLF64 ZIF-CS AVR-1
1 x	Professional Drill/Grinder IBS/E
1 x	Table Saw TKS 2500 SC
1 x	Replacement belts for BSL 220/E
1 x	Sanding pads for OZI 220/E grit 80
1 x	BGA-Bottom-166
1 x	Universal and oil siphoning pump AP 12
1 x	Corundum fan sander for LWS
1 x	DIL44/QFN44-2 ZIF-CS
1 x	Contact bracelet with spiral cord
1 x	Lambswool polishing disc

€18,241.64