Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0245/0242

€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
    submodule
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	DIL48/SDIP56 ZIF 68HC05Bx
1 x	Broca de alta duração de 2.9mm
1 x	DIL20/PLCC20 ZIF-CS
1 x	Bottom PSOP44 NOR-1
1 x	High quality corundum grinding bits
1 x	DIL48/PQFP100 ZIF ST10-1
1 x	Socket Wrenches 1.5
1 x	Side cutters 160mm
1 x	Tungsten carbide cutter 1.0mm
1 x	DIL44/PSOP44 ZIF 600 mil
3 x	BGA-0245/0243
1 x	Combination pliers 190mm
1 x	MICRO shaper MP 400
1 x	DIL48/QFP100 ZIF PLD-3
2 x	Cross-recess Screwdrivers 1
1 x	DIL40/TQFP64 ZIF EM652X
1 x	Bottom PSOP44 NOR-2
1 x	Socket Wrenches 2.0
2 x	Professional polishing sponge
2 x	Cross-recess Screwdrivers 0
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	DIL40/VQFP64 ZIF AWM-1
1 x	BGA-Bottom-11
2 x	Cross-recess Screwdrivers 000
1 x	Safety Insulated Pozidriv Screwdriver 14-644VDE
1 x	Hot wire cutter THERMOCUT 650
1 x	Professional set for finish grinding and polishing
1 x	Multipurpose Vices Primus 75
1 x	High quality corundum grinding bits
1 x	Wrench Keys 0.7
1 x	HSS drill bits 1.2mm
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Mini side cutters EUROline-Conductive
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Telephone pliers bent 165mm
1 x	Mini side cutters EUROline-Conductive
1 x	DIL48/SSOP70 ZIF OKI-1
1 x	High quality corundum grinding bits
1 x	DIL48/SSOP56 ZIF Flash-3
1 x	DIL28/QFP52 ZIF-CS SX52
1 x	Super-fine sanding discs grain 2000
1 x	Lathe System PD 400
1 x	DIL48/TQFP144 ZIF ST10-1
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Safety insulated screwdrivers 14-601 VDE
1 x	Independent four jaw chuck for the DB 250
1 x	Precision Vice FMZ
1 x	Safety insulated screwdrivers 14-604 VDE
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Side cutters 170mm
1 x	Screwdriver 2.5
1 x	Socket Wrenches 5.0
1 x	Broca de alta duração de 1.1mm
1 x	Wire strippers 165mm
1 x	Safety Insulated Pozidriv Screwdriver 14-642VDE
1 x	MICRO Heat gun MH 550
1 x	DIL32/MLF32-1 ZIF
1 x	BGA-Bottom-1
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	DIL40/TQFP80-1 ZIF AWM-1
1 x	Felt polishers
2 x	Coarse-toothed (18 TPI per 25mm)
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	sandpaper for PS 13 Grot 180
1 x	EUROline flat nose pliers
3 x	MICROMOT Mains Adapter NG 2/S
1 x	BGA-0245/0241
1 x	Saw blade made of high-alloy special steel
1 x	Flame shaped milling cutters
1 x	Corundum grinding disc for LWS
1 x	Dividing attachment TA 230 for PF 250
1 x	Band knife of hardened spring band steel (without teeth)
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Core box bit 3.2mm
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	MICRO-screwdrivers
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	sandpaper for PS 13 Grit 240
1 x	Sanding Discs
1 x	Hot wire cutter THERMOCUT 230/E
1 x	MICROMOT glue gun HKP 220
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	MICROMOT 50/EF
2 x	DIL16/SOIC16-1 ZIF 170mil
1 x	Felt polishers
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Felt polishers
1 x	BGA-Bottom-115
1 x	MICROMOT 50
1 x	Angle cutter 45 °
1 x	DIL20/SOIC20 ZIF 300 mil
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	BGA-0246/0244
1 x	Microfibre polishing wheel, 15-ply (100mm)
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Fixed Steady
1 x	Fibre-Cut Discs
1 x	Slot cutter 5.0mm
1 x	MICROFLAM gas soldering set MGS
1 x	Gear Chuck
1 x	Fibre-Cut Discs
1 x	Diamond blade
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	DIL18W/SOIC18 ZIF 300mil
1 x	Diamond Twist Drills
1 x	Mill/Drill Unit BFB 2000.
1 x	MICROMOT steel collet set
1 x	BGA-Bottom-102
1 x	Blade for Wood and Plastics
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Blade for Steel and brass
1 x	DIL44/SOIC44 ZIF-CS
1 x	EUROline round nose pliers
1 x	V-slot cutter 6.5mm
1 x	Centre Turning Attachment
1 x	Fine dust paper filter for CW-matic
1 x	DIL40/SOIC20 ZIF MB95-1
1 x	Flap Wheels
1 x	DIL28/SOIC28 ZIF 330 mil
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	BeeHive208S
1 x	BGA-Bottom-174
1 x	TIP SPT-4
1 x	BGA-Bottom-198
1 x	BGA-Bottom-218
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	BGA-Bottom-22
1 x	BGA-Top-4 ZIF-CS
1 x	BGA-Bottom-9
1 x	OPTI BF20 VARIO
1 x	BGA-Bottom-111
1 x	Broca de alta duração de 0.4mm
1 x	BGA-Bottom-231

€20,597.69