€1,799.00 + VAT

Lathe System PD 400
[24400]

Lathe System PD 400

Lathe System PD 400

Lathe PD 400 is unequalled in its class. Don't waste your time if you are trying to find similar value for money.

Ideal for straight and cross cuts, taper turning, internal and external thread cutting slotting etc. Useable on materials such as steel, non-ferrous metals (aluminum, brass etc.). Negligible variances even under heavy loads.
Ground and hardened beds of ribbed construction for highest precision and stability. The wide range of accessories complements the lathe's functions. The bed is equipped with a milled surface for securing mill/drill PF 400.

  1. Supplied with change gears for thread cutting in 19 steps (0,2 - 3,0 mm). Clearly positioned and easy to change.
  2. Main switch with emergency stop function and restart protection.
  3. Quality, precision 3 jaw chuck with 100 mm capacity.
  4. Powerful capacitor motor with 550 W output.
  5. Quick-change tool post with 2 holders (fitted with adjustable height and stop).
  6. Includes MT2 rotating centre in tailstock.
  7. Easy to use hand wheel of aluminum with adjustable scale of steel. 1 division = 0.05 mm.
  8. Fully enclosed leadscrew with Acme thread (12 x 1.5).
  9. Cross-braced cast iron bed with wide, ground ways.
  10. Handwheel for quick support change.
  11. Switch for clockwise, off and counter-clockwise rotation.
  12. Selector for auto feed.
     

Technical Data:
Centre distance 400 mm, centre height 85 mm. The swing over the top slide is 116 mm (!). Solid, ribbed bed is made of quality cast iron with ground and hardened ways. Oversized spindle with 2 adjustable taper bearings, MT 3 taper and 20.5 mm bore. Run-out, without chuck, 5/1,000 mm.

The precision 3 jaw chuck has a capacity of up to 100 mm. Six spindle speeds are provided via belt drive: Level 1: 80 / 330 / 1,400 rpm; Level 2: 160 / 660 / 2,800 rpm. Powerful, quiet capacitor motor with 550 W output. All adjusting wheels fitted with scales that may be zeroed. 1 division = 0.05 mm. The auto feed has speed of 0.07 or 0.14 mm/rev.

An integrated gearbox with change gears provides 19 pitches: 0.2 - 0.25 - 0.3 - 0.35 - 0.4 - 0.45 - 0.5 - 0.6 - 0.7 - 0.75 - 0.8 - 0.9 - 1.0 - 1.25 - 1.50 - 1.75 - 2.0 - 2.5 - 3.0 mm. Imperial threads of 10 - 48 TPI are also possible. A rotating centre MK 2 and 10 mm MT 2 gear chuck are included. Cross slide travel 85 mm and topslide 55 mm. Swivels through 45° for taper turning. Toolstock with MT 2 (short), spindle travel 40 mm and Ø 24 mm. Supplied with scale. Approx. size 900 x 400 x 300 mm. Weight approx. 45 kg. For cutters of 10 x 10 mm.

Including individual quick-change holders.
 

Reviews
Manufacturers
1 x 6-piece wrench key set ESD
1 x 6-piece screwdriver set ESD
1 x Grinding mop cylinder grit 120
2 x Grinding mop cylinder grit 120
1 x Grinding mop cylinder grit 240
2 x Long neck angle grinder LHW
1 x BIT-SET
1 x Replacement carving blades for MSG
1 x Brass contact cleaner brush
1 x Multiform grindstone
1 x Grinding mop cylinder grit 80
1 x 6-piece set of ESD/EGB tweezers
1 x 6-piece screwdriver and cross-recess set ESD
2 x Angle polisher WP/E
1 x ACCENT SERVICE TOOLS SET
1 x 6-piece socket wrenches ESD
1 x 6-piece TORX-screwdriver-set ESD
4 x Universal and oil siphoning pump AP 12
1 x Broca de alta duração de 2.3mm
1 x Diamond Coated
2 x Professional Drill/Grinder IBS/E
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x sanding belts for BBS/s Grit 80
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x sanding belts for BBS/s Grit 150
1 x Angle cutter 45 °
1 x Slot cutter 6.5mm
3 x MICROMOT 50/E
1 x Edge cutter with pin 6.4mm
2 x MICROMOT Mains Adapter NG 5/E
1 x Half round cutter 13mm
2 x MICROMOT Mains Adapter NG 2/S
1 x Blade guides separately
1 x Slot cutter 3.2mm
1 x Super-Cut
3 x Long neck straight drill/grinder LB/E
1 x Core box bit 3.2mm
1 x Replacement cutting wire for the THERMOCUT 12/E
2 x Tungsten Carbide Tipped (TCT)
1 x Blade for Wood and Plastics
1 x Machine Vice MS 4
3 x Hot wire cutter THERMOCUT 230/E
1 x Rebating cutter 6.4mm
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Slot cutter 5.0mm
1 x Self-adhesive white corundum sanding discs for TG 125/E
3 x Long neck angle milling/drilling unit LWB 220/E
1 x Diamond blade for MBS 240/E
1 x Bandsaw blade of bimetal for MBS 240/E
1 x Tungsten carbide cutters set
1 x 10-piece wood router cutter set
1 x sanding belts for BBS/s Grit 240
1 x Band knife of hardened spring band steel (without teeth)
3 x Bench drill press TBH
2 x Screwdriver bit set. 49-piece.
1 x Precision steel vice PM 40
1 x Blade for Steel and brass
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
2 x Cutting tools of high quality cobalt HSS steel, ground
2 x Step clamps made of steel
1 x Broca de alta duração de 2.9mm
1 x V-slot cutter 6.5mm
1 x Combi cutter 6.5/2.5mm
2 x Replacement glue sticks for HKP 220
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Corundum fan sander for LWS
1 x Diamond-coated cutting and roughing disc
1 x Coarse-toothed (18 TPI per 25mm)
1 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x Flap Wheels
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Crosscut 'Super-Cut' blade
2 x Centre Turning Attachment
1 x Broca de alta duração de 2.6mm
1 x Sanding fleece for LWS
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x Felt cloth polishing disc (100 x 15mm)
1 x Corundum grinding disc for LWS
1 x Silicon-Carbide.
2 x Hot wire cutter THERMOCUT 650
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Polishing Set
2 x Pensander PS 13
2 x Chuck for TBM 220
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x Corundum grinding disc for LWS
1 x Replacement belts for BSL 220/E
1 x Three-jaw steel drill chuck
2 x Three jaw chuck for the lathe DB 250
1 x Corundum sanding discs for LWS
1 x Special Fused Alumina (Hardness N).
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Cutting disc, with reinforcement
1 x Saw blade made of high-alloy special steel
1 x Corundum bound cutting disc for LWS
1 x Corundum sanding discs for LWS
1 x Micro Compound Table KT 70
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Diamond blade
1 x Engraving tool GG
1 x Dividing attachment TA 230 for PF 250
1 x Router base OFV
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Blade holders for DS 460
1 x MICROMOT Mains Adapter NG 2/E
1 x Corundum fan sander for LWS
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Coarse-toothed (25 TPI per 25mm)
2 x Backing disc for LWS
1 x Tungsten tipped saw blade
1 x Sanding fleece for LWS
2 x Independent four jaw chuck for the DB 250
1 x Solid carbide saw blade
1 x Tungstein carbide rasp - and cutting disc
1 x Super safety and specialty bit set, 75-piece
1 x 
1 x Coarse-toothed (10 TPI per 25mm)
2 x MICRO Miller FF 500
1 x Lambswool polishing disc
1 x HSS immersion saw blades for OZI
1 x Spare cutting wire
1 x Fixed Steady
2 x MICROMOT 50/EF
2 x MICRO Miller FF 230
1 x HSS immersion saw blades for OZI
1 x Super-fine sanding discs grain 2000
1 x Precision lathe PD 250/E
1 x Replacement cutting disc for MICRO cutter MIC
1 x Tool holder for rotary tools
2 x MICRO Miller MF 70
1 x Diamond cutting blade for OZI
1 x Professional set for finish grinding and polishing
1 x Fluted filter for CW-matic
2 x MICROMOT 230/E
2 x Bench drill machine TBM 220
1 x Footswitch FS
2 x MICROMOT 50
1 x Diamond-coated cutting disc for MIC
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Belt sander BS/E
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Sanding pads for OZI 220/E grit 240
1 x Microfibre cloth
1 x Sanding pads for OZI 220/E grit 150
2 x Precision drill grinder FBS 12/EF
1 x Disc Sander TG 250/E
1 x Professional polishing sponge
1 x Four Jaw Chuck
1 x Collet Set for accurate use on round components
2 x Precision Drill/Grinder FBS 240/E
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Drill chuck with sliding sleeve for the tailstock
1 x Gear Chuck
1 x Three piece thread cutting set
1 x Hot wire cutter THERMOCUT 12/E
1 x Polishing felt, medium hard
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x HSS cutting blade for OZI
1 x Sanding pads for OZI 220/E grit 80
1 x Jig saw blades made of HSS
1 x Super-fine sanding discs grain 400
1 x Fine dust paper filter for CW-matic
1 x Super-fine sanding discs grain 000
1 x Five piece HSS chisel set
1 x Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x Supercut jig saw blades of special steel
€14,536.78
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook