Top » Catalog » Torque Screwdriver » 4-561

€189.50 + VAT

TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
[4-561]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 0.5 - 1.5
Scale Nm: 0.25
Fine scale mm: 0.05
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Customers who bought this product also purchased

ESD Tweezers 5-194

ANTISTATIC 200ml

TORX-screwdrivers T9

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Thicknesser DH 40
1 x	6-piece wrench key set ESD
1 x	MICRO Band Saw MBS 240/E
1 x	Jig saw STS 12/E
2 x	Step clamps made of steel
1 x	MICROFLAME burner MFB/E
1 x	Independent four jaw chuck for the DB 250
1 x	Brass contact cleaner brush
1 x	Universal and oil siphoning pump AP 12
1 x	Pensander PS 13
1 x	TIP SPT-9
1 x	Tungsten Carbide Tipped (TCT)
1 x	Jig saw blades made of HSS
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Safety Insulated Pozidriv Screwdriver 14-644VDE
1 x	MICRO-screwdrivers
1 x	End side cutters EUROline-Conductive
1 x	Router base OFV
1 x	Flap Wheels
1 x	Hot wire cutter THERMOCUT 650
1 x	EUROline-Conductive set of pliers
1 x	Engraving tool GG
1 x	Supercut jig saw blades of special steel
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Collet Set for accurate use on round components
1 x	End side cutters 45º EUROline-Conductive
1 x	Diamond cutting blade for OZI
1 x	Replacement belts for BSL 220/E
1 x	Three jaw chuck for the lathe DB 250
1 x	Centre Turning Attachment
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Polishing Set
1 x	Super-fine sanding discs grain 000
1 x	Lambswool polishing disc
1 x	Backing disc for LWS
1 x	MICRO Miller FF 230
1 x	CD-CLEANER 200ml
1 x	Super-fine sanding discs grain 400
1 x	Special Fused Alumina (Hardness N).
1 x	Replacement belts for BSL 220/E
1 x	Silicon-Carbide.
1 x	Grinding mop cylinder grit 80
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	FLUX-OFF 400ml
1 x	HSS boring tool set, 6 pieces
1 x	Grinding mop cylinder grit 120
1 x	IC tweezers
1 x	OPTI BF20 VARIO
1 x	MICRO Miller FF 500
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)

€6,566.96