Top » Catalog » Torque Screwdriver » 4-561

€189.50 + VAT

TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
[4-561]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 0.5 - 1.5
Scale Nm: 0.25
Fine scale mm: 0.05
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Customers who bought this product also purchased

TORX-screwdrivers T9

ESD Tweezers 5-194

ANTISTATIC 200ml

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Corundum bound cutting disc for LWS
1 x	Silicon-Carbide.
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Corundum grinding disc for LWS
1 x	Pensander PS 13
1 x	OPTI BF20 VARIO
1 x	Corundum fan sander for LWS
2 x	PLCC Extractor
1 x	Independent four jaw chuck for the DB 250
1 x	OPTI BF20L VARIO
1 x	Precision steel vice PM 40
1 x	Corundum fan sander for LWS
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Crosscut 'Super-Cut' blade
1 x	Insulation Resistance Tester MG125
1 x	Tungsten carbide cutters set
1 x	VIDEOCLEAN 200ml
1 x	Band knife of hardened spring band steel (without teeth)
1 x	sandpaper for PS 13 Grit 240
1 x	Disc Sander TG 125/E
1 x	Three jaw chuck for the lathe DB 250
1 x	Polishing Set
1 x	Tungsten tipped saw blade
1 x	Delta sander OZI/E
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Step clamps made of steel
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	IC tweezers
1 x
1 x	Machine Vice MS 4
1 x	Solid carbide saw blade
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Universal and oil siphoning pump AP 12
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	CD-CLEANER 200ml
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Grinding mop cylinder grit 120
1 x	PLCC Puller
1 x	Cutting disc, with reinforcement
1 x	Precision Drill/Grinder FBS 240/E
1 x	Thicknesser DH 40
1 x	MICROMOT steel collet set
1 x	MICROMOT Mains Adapter NG 2/S
1 x	TU 2404
1 x	Tungsten Carbide Tipped (TCT)
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Professional Drill/Grinder IBS/E
1 x	Bench drill machine TBM 220
1 x	Edge cutter with pin 6.4mm
1 x	Fine dust paper filter for CW-matic
1 x	Flexishaft MICROMOT 110/P
1 x	TU 2004V
1 x	Micro Compound Table KT 70
1 x	Mill/Drill Unit BFB 2000.
1 x	Supercut jig saw blades of special steel
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	MICRO Miller FF 500
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Slot cutter 3.2mm
1 x	MICRO Band Saw MBS 240/E

€11,346.13