€29.67 + VAT

MICROMOT 50/EF
[28512]

MICROMOT 50/EF

Tested 100,000 times, these units speak for themselves.

The body diameter of only 35 mm makes it easy to handle. The weight of 230 g, quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design.  The size of the machine dictates a 12 V drive system, use of a transformer is required. MICROMOT transformers of at least 1 A are recommended.

Milling/Drilling machine MICROMOT 50/EF

The thyristor electronic speed control enables the selection of speeds from 5,000 to 20,000 rpm. Phase angle control and feedback effect circuitry yield high torques, even at low speeds.

The MICROMOT standard 20mm collar allows use in the drill stand MB 140/S, router base OFV, stand UH 34 and angle adapter WS 90.Stable housing of fibreglass reinforced POLYAMIDE. With soft gripping area for extended use during hours.

  • For milling, drilling, routing, de-scaling, polishing, cutting, cleaning, sawing, engraving and more.
  • Useable on any workable material, e.g. steel, precious metals, glass, ceramics, plastics, precious stones etc.
  • Ideal for electronic hobbyists, model builders, tool and die makers, jewellers, opticians, artists, chiropractors, dental technicians and more.
  • 12 V supply allows the safe use of coolant, e.g. when grinding and cutting semi-precious stones!

 

Spec.

  • Power consumption is 40 W
  • length 220 mm
  • weight approx. 230 g.
  • body diameter of only 35 mm
  • standard 20mm collar
  • Stable housing of fibreglass reinforced POLYAMIDE

Sold without power supply


Reviews

Manufacturers
2 x Diamond Coated
2 x Super-Cut
2 x Tungsten Carbide Tipped (TCT)
1 x Compact workshop vacuum cleaner CW-matic
2 x Milling cutter set (2 - 5mm)
2 x MICROMOT drill stand MB 200
1 x Chuck for TBM 220
4 x Dividing attachment TA 230 for PF 250
3 x MICROMOT tool holder
3 x Micro Compound Table KT 70
2 x MICROMOT steel collet set
2 x Three-jaw steel drill chuck
2 x Ball-shaped diamond coated 2.2mm
2 x Protective device for hand-operated MICROMOT
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
2 x Flexishaft MICROMOT 110/BF
2 x Footswitch FS
2 x 14-piece parallel supports set
3 x Mill/Drill Unit BFB 2000.
1 x Router base OFV
2 x Flexishaft MICROMOT 110/P
1 x ESD Tweezers 5-193
1 x Ball-shaped diamond coated 3.2mm
2 x sanding belts for BBS/s Grit 240
1 x Diamond Twist Drills
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x Diamond Grinding Bits 1,8mm
1 x Ball-shaped diamond coated 1.2mm
1 x Gear Chuck
1 x Diamond Cutting Discs
1 x Felt cloth polishing disc (100 x 15mm)
2 x Centre Turning Attachment
1 x Milling cutter set (6 - 10mm)
2 x Diamond Cutting Discs
1 x BGA-Bottom-10
1 x DIL32/QFP64 ZIF H8-1
1 x Replacement belts for BSL 220/E
1 x DIL40/SOIC28 ZIF AWM-1
1 x DIL40/MLF64 ZIF-CS AVR-1
1 x DIL40/QFP64-2 ZIF-CS NEC-1
1 x DIL40/QFP144 ZIF H8S-1
1 x DIL40/QFP64-1 ZIF-CS NEC-1
1 x BGA-Bottom-101
1 x BGA-0246/0243
1 x DIL48/QFP100 ZIF PLD-2
1 x BGA-0245/0242
1 x DIL40/QFP64 ZIF LPC-1
1 x BGA-0245/0243
1 x DIL14W/SOIC14 ZIF 150mil
1 x DIL28W/SOIC28 ZIF 300mil
1 x DIL16/SOIC16 ZIF 200 mil
1 x BGA-Bottom-115
1 x DIL40/SOIC16 ZIF MB-1
1 x DIL40/SOIC20 ZIF AWM-1
1 x BGA-0246/0244
1 x DIL18W/SOIC18 ZIF 300mil
1 x BeeProg2
1 x DIL20W/SOIC20 ZIF 300mil
1 x DIL3/SOT23-3 ZIF-CS
1 x DIL48/QFP100 ZIF PLD-3
1 x DIL24W/SOIC24 ZIF 300mil
1 x DIL28/SOIC28 ZIF 330 mil
1 x BGA-Bottom-103
1 x DIL20/SOIC20 ZIF 200mil
1 x DIL48/QFP100 ZIF MB90F-1
1 x Beeprog2C
1 x DIL48/QFP100 ZIF PLD-4
1 x Replacement belts for BSL 220/E
1 x DIL40/QFP64-3 ZIF NEC-1
1 x DIL20/SOIC20 ZIF 300 mil
1 x DIL40/QFP144 ZIF LPC-1
1 x DIL16W/SOIC16 ZIF 300mil
1 x BGA-Bottom-108
1 x Replacement belts for BSL 220/E
1 x DIL48/QFP100 ZIF NEC-2
1 x BGA-Bottom-111
1 x DIL28/QFP52 ZIF-CS SX52
1 x DIL32/MLF32-1 ZIF
1 x BeeHive204
1 x BGA-Bottom-1
1 x DIL48/QFP100 ZIF NEC-1
1 x DIL32/SOIC32 ZIF 445mil
1 x Wood Lathe DB900
1 x BGA-0245/0241
1 x BeeHive208S
1 x DIL48/QFP100 ZIF PLD-1
1 x DIL44/SOIC44 ZIF-CS
1 x BGA-Bottom-102
1 x DIL16W/SOIC16 ZIF 150mil
1 x DIL40/SOIC20 ZIF MB95-1
1 x BGA-Bottom-106
1 x DIL40/QFP100 ZIF AVR-1
1 x DIL16/SOIC16-1 ZIF 170mil
1 x DIL48/QFP100 ZIF MSP430-1
1 x DIL44/MLF44-1 ZIF-CS
1 x DIL28/QFP64 ZIF H8/3644
1 x DIL32/SOIC32 ZIF 300 mil
1 x DIL40/QFP64-4 ZIF NEC-1
1 x BGA-Bottom-11
1 x BGA-Bottom-105
1 x Diamond-coated cutting and roughing disc
1 x DIL48/SSOP56 ZIF Flash-1
1 x DIL48/LQFP64 ZIF M16C/Tiny
1 x DIL32/SDIP32 ZIF 400mil
1 x DIL8/SSOP8 ZIF 120mil
1 x DIL34/SSOP34 ZIF 200 mil
1 x DIL40/SDIP52 ZIF 55x
1 x DIL48/QFN48 ZIF-CS
1 x DIL28/QFN28-2 ZIF-CS
1 x DIL48/SSOP70 ZIF OKI-1
1 x DIL48/LQFP64 ZIF M38039/M39049
1 x DIL42/SDIP42 ZIF 600mil
1 x DIL34/SSOP34-1 ZIF-CS
1 x DIL32/SDIP64 ZIF H8-1
€30,236.59
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook