€4.75 + VAT

FREEZER-BR 200ml
[1461412]

FREEZER-BR 200ml

Quickly Tracks Thermal Intermittents, Cools Down to -50° C.

  • FREEZER-BR is CFC-free.
  • It ensures reliable cooling down to -50°C.
  • It quickly locates thermal intermittent components due to heat induces failure.
  • The product is chemically pure, flammable and evaporates immediately without leaving residue.

Application:

  • Low temperature testing of electronic systems and heat-sensitive components such as ICs, transistors, diodes, resistors, capacitors and other defective components.
  • Also suitable for heat sink protection of electronic components during soldering or desoldering.
  • Low temperature testing of electromechanical systems and electronic circuits.
  • Location of hairline cracks in printed circuit boards.

Technical Data:

 

Density: 0.54 g / cm³
Evaporation: complete
Temperature obtained:  -50° C
Flash point: flammable
ODP: 0.00

Reviews

Customers who bought this product also purchased
Glass fibre contact cleaner brush
Glass fibre contact cleaner brush
DUSTER-BR 200ml
DUSTER-BR 200ml
DEGRESER 200ml
DEGRESER 200ml
Manufacturers
2 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Professional polishing sponge
1 x Combi cutter 6.5/2.5mm
1 x Half round cutter 13mm
1 x Complete Engraving Kit with trial glass
1 x MICROMOT 50/EF
1 x Insulation Resistance Tester MG125
2 x Grinding mop cylinder grit 120
1 x Grinding mop cylinder grit 80
2 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x Three-jaw steel drill chuck
1 x Precision Vice FMZ
1 x Bench drill machine TBM 220
2 x Centre Turning Attachment
2 x Router base OFV
1 x Blade for Steel and brass
1 x Crimping plier for BNC
1 x 10-piece wood router cutter set
2 x Chuck for TBM 220
1 x Microfibre cloth
2 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
2 x Engraving tool GG
2 x Replacement glue sticks for HKP 220
1 x Super-fine sanding discs grain 400
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x Sanding fleece for LWS
1 x MICROMOT glue gun HKP 220
1 x Replacement carving blades for MSG
1 x Universal holder UHZ
1 x Grinding mop cylinder grit 120
2 x Professional set for finish grinding and polishing
1 x Corundum bound cutting disc for LWS
1 x Micro Compound Table KT 70
2 x MICROMOT Mains Adapter NG 2/S
1 x Flexishaft MICROMOT 110/BF
2 x Universal and oil siphoning pump AP 12
1 x Polishing Set
1 x Screwdriver bit set. 49-piece.
1 x Five piece HSS chisel set
2 x Machine Vice MS 4
1 x MICROMOT 50
2 x Super-fine sanding discs grain 000
1 x 14-piece parallel supports set
1 x Sanding fleece for LWS
1 x MICROMOT extension cord. 300cm.
2 x Step clamps made of steel
1 x Angle polisher WP/E
2 x Grinding mop cylinder grit 240
2 x Backing disc for LWS
1 x Footswitch FS
1 x Slot cutter 3.2mm
1 x MICROFLAM gas soldering set MGS
1 x PLCC Puller
1 x Brass contact cleaner brush
1 x Tool holder for rotary tools
1 x Long neck angle grinder LHW
1 x Belt sander BBS/S
2 x MICROMOT Mains Adapter NG 5/E
1 x Aluminium Die-Cast
1 x MICRO Miller FF 500
1 x Diamond cutting blade for OZI
1 x Warding files set, 6pcs
2 x Microfibre polishing wheel, 15-ply (100mm)
1 x Self-adhesive white corundum sanding discs for TG 125/E
2 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x Long neck straight drill/grinder LB/E
2 x 
1 x MICRO Heat gun MH 550
1 x sandpaper for PS 13 Grot 180
1 x Multipurpose Vices Primus 75
1 x Cutting disc, with reinforcement
2 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Belt sander BS/E
1 x Edge cutter with pin 6.4mm
1 x Slot cutter 6.5mm
1 x Tungsten carbide cutters set
1 x Sanding pads for OZI 220/E grit 150
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x Angle cutter 45 °
2 x Diamond-coated cutting and roughing disc
2 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Compact workshop vacuum cleaner CW-matic
1 x Band knife of hardened spring band steel (without teeth)
1 x Inpection mirror 1-978
1 x Corundum grinding disc for LWS
1 x Corundum fan sander for LWS
1 x Replacement cutting wire for the THERMOCUT 12/E
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Blade holders for DS 460
1 x Tungsten Carbide Tipped (TCT)
1 x Special Fused Alumina (Hardness N).
2 x MICROFLAME burner MFB/E
1 x Three jaw chuck for the lathe DB 250
1 x HSS cutting blade for OZI
1 x Handy 1515
1 x Radius Cutting Attachment, complete with pointed tool
1 x Self-adhesive silicone film for easy sanding disc replacement
1 x Insulation Resistance Tester MG500
1 x Corundum sanding discs for LWS
1 x HSS immersion saw blades for OZI
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
2 x Dividing attachment TA 230 for PF 250
2 x Cylinder sander WAS/E
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Spare cutting wire
1 x Coarse-toothed (25 TPI per 25mm)
1 x Fluted filter for CW-matic
1 x Coarse-toothed (18 TPI per 25mm)
1 x Three piece thread cutting set
1 x Precision Vice FMS 75
1 x MICRO-screwdrivers
1 x Replacement belts for BSL 220/E
1 x Collet Set for accurate use on round components
1 x Super safety and specialty bit set, 75-piece
1 x Fine dust paper filter for CW-matic
1 x Flap Wheels
1 x Grinding and Polishing Machine SP/E
1 x Stainless steel brushes
1 x Rounding over cutter 6.4mm
1 x MICROMOT 50/E
1 x Polishing felt, medium hard
1 x Professional Drill/Grinder IBS/E
1 x Gear Chuck
1 x Universal polishing paste
1 x Tungstein carbide rasp - and cutting disc
1 x Glass fibre contact cleaner brush
1 x Jig saw blades made of HSS
1 x Multipurpose Vices Primus100
1 x Bandsaw blade of bimetal for MBS 240/E
1 x Glass fibre contact cleaner brush
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x CRIMPING PLIERS/WIRE STRIPPER
1 x Corundum fan sander for LWS
1 x Replacement cutting disc for MICRO cutter MIC
1 x Pensander PS 13
1 x Sanding pads for OZI 220/E grit 240
1 x Multiform grindstone
1 x Precision Drill/Grinder FBS 240/E
1 x sandpaper for PS 13 Grit 400
1 x MICRO Miller MF 70
1 x Silicon-Carbide.
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Delta sander OZI/E
1 x MICROMOT drill stand MB 200
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
2 x Independent four jaw chuck for the DB 250
1 x Sanding pads for OZI 220/E grit 80
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Felt cloth polishing disc (100 x 15mm)
1 x Long neck angle milling/drilling unit LWB 220/E
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x MICROMOT 230/E
1 x MICRO Miller FF 230
2 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Four Jaw Chuck
1 x Supercut jig saw blades of special steel
1 x Blade for Wood and Plastics
1 x Corundum sanding discs for LWS
1 x Disc Sander TG 125/E
1 x MICROMOT Mains Adapter NG 2/E
1 x Polishing machine PM 100
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Bench drill press TBH
1 x V-slot cutter 6.5mm
1 x HSS immersion saw blades for OZI
1 x Mill/Drill Unit BFB 2000.
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x Precision steel vice PM 40
1 x Protective device for hand-operated MICROMOT
1 x HSS boring tool set, 6 pieces
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Fixed Steady
1 x sandpaper for PS 13 Grit 240
1 x Blade guides separately
1 x Coarse-toothed (10 TPI per 25mm)
1 x Diamond-coated cutting disc for MIC
€10,685.64
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
CRAMOLIN
CRAMOLIN Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook