€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Manufacturers

Information

1 x	Wrench Keys 1.3
1 x	Socket Wrenches 4.0
1 x	Safety Insulated Pozidriv Screwdriver 14-641VDE
1 x	Socket Wrenches 1.5
1 x	Wrench Keys 0.9
1 x	Socket Wrenches 3.2
1 x	Socket Wrenches 5.5
1 x	Socket Wrenches 2.0
1 x	Socket Wrenches 3.0
1 x	Socket Wrenches 4.5
1 x	Socket Wrenches 5.0
1 x	Safety Insulated Phillips Screwdriver 14-634VDE
1 x	SmartProg2
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Special Fused Alumina (Hardness N).
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Replacement belts for BSL 220/E
1 x	6-piece set of ESD/EGB tweezers
1 x	End side cutters EUROline-Conductive
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	ESD Tweezers 5-193
1 x	Brass brushes
1 x	Conj 5 pinças ESD
2 x	Replacement belts for BSL 220/E
1 x	TU 2404
1 x	ESD Tweezers 5-192
1 x	Cups brushes
1 x	EUROline-Conductive set of pliers
1 x	End side cutters 45º EUROline-Conductive
2 x	Silicon-Carbide.
1 x	Mini side cutters EUROline-Conductive
1 x	Stainless steel wheels
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Replacement belts for BSL 220/E
1 x	Polishing Set
1 x	Diamond Cutting Discs
1 x	Tungstein carbide rasp - and cutting disc
1 x	ESD Tweezers 5-191
1 x	Complete Engraving Kit with trial glass
1 x	Mini side cutters EUROline-Conductive
1 x	Side cutters EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Wheels brushes
1 x	ESD Tweezers 5-194
1 x	Steel wheels
1 x	Hand magnifier with LED light 3X

€3,371.55