€12.67 + VAT

TOP-PIN 200ml
[1101412]

TOP-PIN 200ml

Long Term Protection of Precious Metal Contacts and Connectors.

  • TOP-PIN has been specially developed for preserving precious metal contacts.
  • It gently cleans lubricates and protects these micro-thin surfaces of contacts and connectors.
  • The high-quality synthetic active agents and inhibitors show remarkable lubricating and anti-corrosion properties, thus preventing abrasion and damaging of delicate precious metal layers and ruling out any corrosion of supporting base metals.
  • The protective film of TOP-PIN is stable, very thin, highly lubricating, and resistant to high heat

Application:

  • TOP-PIN is recommended for PCB gold fingers, computer interface connectors and guarantees a long-lasting preservation of operational reliability for contacts and connectors of all types.
  • The use of TOP-PIN is particularly recommended in high-quality electronic appliances and in the case of aggresive environments in workshops, industry, electronic motorcar equipment, EDP, telecommunications, aerospace and in the military sector.

Technical Data:

 

Colour: yellowish
Odour: that of solvents
Density: 0.67 g / cm³
Heat resistance (film): up to +300° C
Anit-corrosion protection:  4 cycles (DIN IEC 68)
Lubricating properties under pressure: excellent
Reviews
Manufacturers
1 x Sanding fleece for LWS
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Corundum fan sander for LWS
1 x Professional set for finish grinding and polishing
1 x Blade for Wood and Plastics
1 x Blade for Steel and brass
1 x Grinding mop cylinder grit 240
1 x Replacement glue sticks for HKP 220
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x Replacement cutting wire for the THERMOCUT 12/E
2 x Grinding mop cylinder grit 120
1 x MICROMOT Mains Adapter NG 5/E
1 x Super-fine sanding discs grain 2000
1 x Microfibre cloth
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Grinding mop cylinder grit 80
1 x Super-fine sanding discs grain 000
1 x Supercut jig saw blades of special steel
1 x Corundum sanding discs for LWS
1 x Sanding fleece for LWS
1 x Jig saw blades made of HSS
1 x Professional polishing sponge
1 x Blade guides separately
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Corundum sanding discs for LWS
1 x Super-fine sanding discs grain 400
1 x Band knife of hardened spring band steel (without teeth)
1 x Polishing felt, medium hard
1 x Backing disc for LWS
1 x Special Fused Alumina (Hardness N).
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Tungsten carbide cutters set
1 x sandpaper for PS 13 Grot 180
1 x Side cutters 170mm
1 x Four Jaw Chuck
1 x HSS cutting blade for OZI
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x Replacement cutting disc for MICRO cutter MIC
1 x Side cutters 160mm
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Fluted filter for CW-matic
1 x V-slot cutter 6.5mm
1 x Collet Set for accurate use on round components
1 x Silicon-Carbide.
1 x Flexishaft MICROMOT 110/BF
1 x MICROMOT tool holder
1 x sandpaper for PS 13 Grit 400
1 x Blade holders for DS 460
1 x 14-piece parallel supports set
1 x Replacement belts for BSL 220/E
1 x MICROMOT steel collet set
1 x Half round cutter 13mm
1 x CRIMPING PLIERS/WIRE STRIPPER
1 x Core box bit 3.2mm
1 x Footswitch FS
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x Micro Compound Table KT 70
1 x Three-jaw steel drill chuck
1 x MICROMOT extension cord. 300cm.
1 x Rebating cutter 6.4mm
1 x Side cutters 160mm
1 x Saw blade made of high-alloy special steel
1 x End side cutters EUROline-Conductive
1 x Sanding pads for OZI 220/E grit 80
1 x MICROMOT Mains Adapter NG 2/S
1 x Three jaw chuck for the lathe DB 250
1 x Angle cutter 45 °
1 x Tungsten tipped saw blade
1 x MICROMOT Mains Adapter NG 2/E
1 x Mill/Drill Unit BFB 2000.
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x HSS immersion saw blades for OZI
1 x Self-adhesive silicone film for easy sanding disc replacement
1 x Replacement belts for BSL 220/E
1 x Side cutters 195mm
1 x Step clamps made of steel
1 x Super-Cut
1 x Coarse-toothed (18 TPI per 25mm)
1 x Universal polishing paste
1 x Coarse-toothed (25 TPI per 25mm)
1 x Spare cutting wire
1 x Combi cutter 6.5/2.5mm
1 x Precision steel vice PM 40
1 x Drill chuck with sliding sleeve for the tailstock
1 x Coarse-toothed (10 TPI per 25mm)
1 x EUROline mini side cutter
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x Diamond Coated
1 x Gear Chuck
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Sanding pads for OZI 220/E grit 150
1 x EUROline side cutter pointed head
1 x Side cutters 180mm
1 x HSS immersion saw blades for OZI
1 x Diamond cutting blade for OZI
1 x 
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Flexishaft MICROMOT 110/P
1 x Rounding over cutter 6.4mm
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x Mini side cutters EUROline-Conductive
1 x Broca de alta duração de 1.3mm
1 x MICROMOT 50
1 x Tungstein carbide rasp - and cutting disc
1 x MULTI 200ml
1 x SPRAYOIL 200ml
1 x Broca de alta duração de 1.0mm
1 x Broca de alta duração de 0.4mm
1 x Precision drill grinder FBS 12/EF
1 x Bench drill machine TBM 220
1 x Parting tool 10mm
1 x lathe tools 8mm
1 x Bench drill press TBH
2 x MICRO Miller FF 230
1 x Broca de alta duração de 1.2mm
1 x SPRAYFLON 200ml
1 x TU 2004V
€5,978.78
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
CRAMOLIN
CRAMOLIN Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook