€12.67 + VAT

TOP-PIN 200ml
[1101412]

TOP-PIN 200ml

Long Term Protection of Precious Metal Contacts and Connectors.

  • TOP-PIN has been specially developed for preserving precious metal contacts.
  • It gently cleans lubricates and protects these micro-thin surfaces of contacts and connectors.
  • The high-quality synthetic active agents and inhibitors show remarkable lubricating and anti-corrosion properties, thus preventing abrasion and damaging of delicate precious metal layers and ruling out any corrosion of supporting base metals.
  • The protective film of TOP-PIN is stable, very thin, highly lubricating, and resistant to high heat

Application:

  • TOP-PIN is recommended for PCB gold fingers, computer interface connectors and guarantees a long-lasting preservation of operational reliability for contacts and connectors of all types.
  • The use of TOP-PIN is particularly recommended in high-quality electronic appliances and in the case of aggresive environments in workshops, industry, electronic motorcar equipment, EDP, telecommunications, aerospace and in the military sector.

Technical Data:

 

Colour: yellowish
Odour: that of solvents
Density: 0.67 g / cm³
Heat resistance (film): up to +300° C
Anit-corrosion protection:  4 cycles (DIN IEC 68)
Lubricating properties under pressure: excellent
Reviews
Manufacturers
1 x Cross-recess Screwdrivers 0
1 x Table Saw TKS 2500 SC
1 x surface planing and thicknessing ADH 200
1 x Cross-recess Screwdrivers 1
1 x Table Sawr TKS 315 E
2 x Flat nose pliers 185mm
4 x Wood Lathe DB450
4 x Wood Lathe DB900
1 x Cross-recess Screwdrivers 1
1 x Vacum SAA 901
1 x FLUX DISPENSING PEN, LEAD FREE
1 x Angle polisher WP/E
2 x 4-jaw chuck individually clamping 100mm
1 x Grinding mop cylinder grit 120
1 x High quality corundum grinding bits
1 x High quality corundum grinding bits
1 x Safety Insulated Phillips Screwdriver 14-633VDE
1 x Safety Insulated Pozidriv Screwdriver 14-641VDE
1 x Diamond Cutting Discs
1 x Fibre-Cut Discs
2 x Diamond Cutting Discs
1 x Broca de alta duração de 2.7mm
1 x ACCENT SERVICE TOOLS SET
1 x TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x Brass brushes
2 x Super-Cut
2 x MICROMOT drill stand MB 200
1 x Diamond Coated
2 x 14-piece parallel supports set
1 x sandpaper for PS 13 Grit 400
2 x Conjunto de três brocas de ponto
2 x Three-jaw steel drill chuck
1 x sandpaper for PS 13 Grot 180
1 x surface planing and thicknessing ADH 250
2 x Mill/Drill Unit BFB 2000.
2 x HSS drill bits 1.6mm
1 x Protective device for hand-operated MICROMOT
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Stainless steel wheels
1 x Replacement cutting disc for MICRO cutter MIC
2 x Tungsten Carbide Tipped (TCT)
1 x Stainless steel brushes
1 x MICROMOT tool holder
1 x Tungsten carbide drills Ø1mm
1 x HSS drill bits 0.8mm
2 x HSS drill bits 1.2mm
1 x HSS drill bits 1.0mm
2 x 6-piece set of ESD/EGB tweezers
1 x MICROMOT extension cord. 300cm.
1 x Tweezer teflon-coated 5-117-9
1 x Tool holder type D for SWH 1-A
1 x DIL20/PLCC20 ZIF-CS
1 x DIL40/PLCC68 ZIF DS87C550
2 x Face clamping disc for D250X550
1 x DIL40/PLCC44 ZIF AWM-1
3 x Precision quick-action drill chuck 0-13mm B16
1 x DIL32/PLCC32 ZIF-CS
1 x MICRO Miller MF 70
1 x DIL20W/PLCC20 ZIF
1 x TIP SPT-3
1 x DIL28/PLCC84 ZIF HS538ESC01H
2 x TU 2004V
2 x Collet chuck ER32 for D250X550
1 x quantum revolving center CM2
1 x DIL28/PLCC32 ZIF EPROM
1 x DIL32/PLCC32 ZIF
1 x DIL40/PLCC52 ZIF AWM-2
1 x DIL32/PLCC32 ZIF-CS NOR-1
1 x TU 2404
1 x machine base with shelves for D250X550
1 x DIL40/PLCC52 ZIF DS87C530
1 x 4-jaw chuck individually clamping 125mm
1 x Cutting tool 10 mm
1 x DIL40/PLCC68 ZIF AWM-1
1 x DIL28/PLCC28 ZIF
1 x DIL20W/SOIC20 ZIF 300mil
2 x 3-jaw chuck centrically clamping 125mm
1 x precision machine vices FMS100
1 x DIL20/SOIC20 ZIF 200mil
1 x DIL34/SSOP34-1 ZIF-CS
3 x Polishing felt, medium hard
2 x Precision quick-action drill chuck 0-10mm B16
1 x DIL48/SSOP56 ZIF Flash-1
3 x Morse taper MT3 - B16
1 x EUROline side cutter rounded head
1 x DIL32/SOIC32 ZIF 300 mil
1 x End milling cutter kit HSS 20 pcs
2 x lathe tools 10mm
1 x Precision quick-action drill chuck 0-10mm B16
1 x DIL44/SSOP44 ZIF 240mil
2 x Flap Wheels
1 x 3-jaw chuck centrically clamping 100mm
1 x DIL40/SOIC20 ZIF MB95-1
1 x DIL16W/SOIC16 ZIF 300mil
1 x IT 150 - Indirect dividing attachment
2 x centrically clamping 100mm
1 x DIL48/SSOP56 ZIF Flash-3
1 x DIL8/SSOP8 ZIF 120mil
2 x 3-jaw chuck centrically clamping 160mm
1 x centrically clamping 125mm
1 x CM2 - B16 - M10
1 x TORX-screwdrivers T20
1 x OPTI BF20L VARIO
1 x DIL48/SSOP48 ZIF 300mil
1 x DIL28W/SOIC28 ZIF 300mil
1 x DIL44/SOIC44 ZIF-CS
1 x OPTI BF20 VARIO
1 x Bottom PSOP44 NOR-3
1 x precision machine vices FMS150
1 x Morse taper MT2 - B16
2 x 3-jaw chuck centrically clamping 80mm
1 x precision machine vices FMS200
1 x Bottom PSOP44 NOR-2
1 x lathe tools 12mm
1 x lathe tools 8mm
2 x 4-jaw chuck individually clamping 80mm
1 x DIL40/SOIC16 ZIF MB-1
2 x Precision quick-action drill chuck 0-16mm B16
1 x DIL40/SOIC20 ZIF AWM-1
1 x DIL16/SOIC16-1 ZIF 170mil
1 x OPTI BF16 Vario
1 x PRECISION WIRE STRIPPER ESD-PLUS
1 x Conj 5 pinças ESD
1 x ESD Tweezers 5-191
1 x ESD Tweezers 5-192
1 x ESD Tweezers 5-193
1 x ESD Tweezers 5-195
1 x Ceramic-tipped tweezers and ESD 5-096
1 x Ceramic-tipped tweezers and ESD 5-095
1 x ESD Tweezers 5-194
1 x ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x Broca de alta duração de 2.8mm
2 x Chuck for TBM 220
1 x Floor cover ESD
2 x Fibre-Cut Discs
1 x Diamond Cutting Discs
1 x Fibre-Cut Discs
1 x Metal Cutting Blades
1 x Diamond Cutting Discs
2 x Fibre-Cut Discs
2 x Fibre-Cut Discs
1 x Glass fibre contact cleaner brush
1 x Cutting disc, with reinforcement
1 x EUROline snipe nose pliers
1 x Replacement belts for BSL 220/E
1 x MICROMOT Mains Adapter NG 5/E
1 x MICROMOT Mains Adapter NG 2/E
1 x Combination pliers 190mm
1 x Super safety and specialty bit set, 75-piece
1 x MICROMOT Mains Adapter NG 2/S
1 x Replacement glue sticks for HKP 220
1 x Independent four jaw chuck for the DB 250
1 x Collet Set for accurate use on round components
1 x Wire strippers 160mm
2 x Bench Circular Saw KS 230
1 x Professional set for finish grinding and polishing
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x Felt polishers
1 x Warding files set, 6pcs
1 x Felt polishers
1 x Three piece thread cutting set
1 x TIP SPT-2
1 x Tungsten carbide drills Ø1,5mm
1 x BeeHive208S
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x Router base OFV
1 x Felt cloth polishing disc (100 x 15mm)
3 x SCREEN 200ml
1 x TIP SPT-4
1 x Wire strippers 165mm
1 x Replacement belts for BSL 220/E
1 x Hot wire cutter THERMOCUT 650
1 x Wolfram vanadium steel milling bits
2 x Crimping plier for BNC
1 x Flame shaped milling cutters
1 x Engraving tool GG
1 x Tungsten carbide drills Ø2mm
1 x Sanding Drums
1 x MULTI 200ml
1 x Felt polishers
1 x Corundum fan sander for LWS
2 x Aluminium Die-Cast
1 x 
1 x Polishing machine PM 100
2 x HSS twist drill set to DIN 338
1 x Edge cutter with pin 6.4mm
1 x Three jaw chuck for the lathe DB 250
1 x TIP SPT-10
1 x Precision steel vice PM 40
1 x Sanding Drums
1 x Corundum sanding discs for LWS
1 x Corundum sanding discs for LWS
1 x Fine dust paper filter for CW-matic
1 x High quality corundum grinding bits
1 x High quality corundum grinding bits
1 x Centre Turning Attachment
1 x Corundum grinding disc for LWS
1 x Sanding Discs
1 x Thicknesser DH 40
1 x Drill chuck with sliding sleeve for the tailstock
1 x High quality corundum grinding bits
1 x Sanding Drums
1 x FREEZER-BR 200ml
1 x Telephone pliers stright 205mm
1 x Round nose pliers 185mm
1 x SPRAYFLON 200ml
1 x CD-CLEANER 200ml
1 x Telephone pliers bent 165mm
1 x Telephone pliers bent 205mm
€38,147.72
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
CRAMOLIN
CRAMOLIN Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook