Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0245/0242

€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
  Universal programmers
Service Case->
Torque Screwdriver

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Hand magnifier with LED light 3X
1 x	BIT-SET
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Three piece thread cutting set
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Precision Vice FMS 75
2 x	Machine Vice MS 4
1 x	Multipurpose Vices Primus100
1 x	Precision lathe PD 250/E
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Multipurpose Vices Primus 75
1 x	Precision Vice FMZ
1 x	Lathe System PD 400
2 x	Precision steel vice PM 40
1 x	Super-fine sanding discs grain 2000
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Professional polishing sponge
1 x	Diamond blade for MBS 240/E
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Microfibre cloth
1 x	Super-fine sanding discs grain 400
2 x	Band knife of hardened spring band steel (without teeth)
1 x	Independent four jaw chuck for the DB 250
1 x	Three jaw chuck for the lathe DB 250
1 x	Blade for Wood and Plastics
1 x	Polishing felt, medium hard
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Five piece HSS chisel set
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Blade for Steel and brass
3 x	Backing disc for LWS
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Lambswool polishing disc
1 x	Corundum sanding discs for LWS
1 x	Special Fused Alumina (Hardness N).
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	BGA-Bottom-174
1 x	Broca de ponto 3.15 x 1.00
1 x	BGA-Bottom-215
1 x	Broca de alta duração de 2.2mm
1 x	BGA-Bottom-180
1 x	BGA-Bottom-157
1 x	BGA-Bottom-211
1 x	Crocodile clip
1 x	BGA-Bottom-173
1 x	broca de alta duração de 0,2mm
1 x	BGA-Bottom-208
1 x	Fine dust paper filter for CW-matic
1 x	Broca de alta duração de 1.0mm
1 x	BGA-Bottom-209
1 x	DIL24/QSOP24 ZIF 150mil
1 x	BeeProg2
1 x	DIL16W/SOIC16 ZIF 150mil
1 x	BGA-Bottom-195
1 x	Corundum grinding disc for LWS
1 x	Polishing Set
1 x	Broca de ponto 6.30 x 2.50
1 x	BGA-Bottom-187
1 x	DIL20/SOIC20 ZIF 200mil
1 x	Sanding fleece for LWS
1 x	BGA-Bottom-212
1 x	Contact bracelet with spiral cord
2 x	BGA-Bottom-191
1 x	Broca de alta duração de 0.5mm
1 x	Corundum grinding disc for LWS
1 x	Broca de alta duração de 2.1mm
1 x	BGA-Bottom-199
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	Tungsten carbide cutters set
1 x	BGA-Bottom-169
2 x	BGA-Bottom-192
1 x	Beeprog2C
3 x	Crimping plier for BNC
1 x	Broca de ponto 5.00 x 2.00
1 x	Broca de alta duração de 1.4mm
1 x	BGA-Bottom-202
1 x	Earthing module
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	sandpaper for PS 13 Grit 240
1 x	Broca de alta duração de 2.3mm
1 x	6-piece wrench key set ESD
1 x	BGA-Bottom-16
1 x	BGA-Bottom-196
3 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Sanding fleece for LWS
1 x	Broca de alta duração de 1.3mm
1 x	6-piece socket wrenches ESD
1 x	Earth wire
1 x	Broca de alta duração de 2.0mm
1 x	BGA-Bottom-198
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	broca de alta duração de 0,6mm
1 x	Step clamps made of steel
1 x	DIL20W/PLCC20 ZIF
1 x	BGA-Bottom-214
1 x	Collet Set for accurate use on round components
1 x	DIL28/PLCC28 ZIF
1 x	Conjunto de três brocas de ponto
1 x	Tool holder for rotary tools
1 x	Fluted filter for CW-matic
1 x	Broca de alta duração de 1.5mm
1 x	Broca de alta duração de 0.3mm
1 x	DIL28/PLCC32 ZIF EPROM
1 x	Gear Chuck
1 x	DIL16/SOIC16 ZIF 200 mil
1 x	Corundum fan sander for LWS
1 x	6-piece TORX-screwdriver-set ESD
1 x	BGA-Bottom-165
1 x	Broca de ponto 3.15 x 1.25
1 x	DIL18W/SOIC18 ZIF 300mil
1 x	sandpaper for PS 13 Grot 180
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Broca de alta duração de 1.2mm
1 x	Broca de alta duração de 2.4mm
1 x	Broca de ponto 8.00 x 3.15
1 x	Broca de alta duração de 0.8mm
1 x	DIL20/PLCC20 ZIF-CS
1 x	Broca de alta duração de 2.5mm
1 x	Diamond-coated cutting and roughing disc
1 x	BGA-Bottom-166
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	Corundum bound cutting disc for LWS
1 x	Tungstein carbide rasp - and cutting disc
1 x	BGA-Bottom-167
1 x	6-piece screwdriver set ESD
1 x	6-piece screwdriver and cross-recess set ESD
1 x	Four Jaw Chuck
1 x	Bottom PSOP44 NOR-2
1 x	BGA-Bottom-164
1 x	BGA-Bottom-207
1 x	Silicon-Carbide.
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	BGA-Bottom-170
1 x	Universal polishing paste
1 x	BGA-Bottom-154
1 x	Earth wire with dummy Schunko-plug
1 x	Bottom PSOP44 NOR-3
1 x	BGA-Bottom-194
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Broca de alta duração de 0.4mm
1 x	BGA-Bottom-204
2 x	Micro Compound Table KT 70
1 x	BGA-Bottom-2
1 x	BGA-Bottom-20
2 x
1 x	Corundum sanding discs for LWS
1 x	Broca de alta duração de 0.7mm
1 x	DIL28/PLCC28 ZIF-CS
1 x	BGA-Bottom-21
1 x	Earth wire
1 x	Centre Turning Attachment
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	sandpaper for PS 13 Grit 400
1 x	Broca de alta duração de 1.1mm
1 x	Corundum fan sander for LWS
1 x	Broca de alta duração de 0.9mm
3 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	BGA-Bottom-18
1 x	Chuck for TBM 220
1 x	Ball shaped milling cutters
2 x	Tungsten Carbide Tipped (TCT)
1 x	14-piece parallel supports set
1 x	Bench drill press TBH
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	ESD Tweezers 5-192
1 x	Saw blade made of high-alloy special steel
1 x	Side cutters EUROline-Conductive
1 x	Mini side cutters EUROline-Conductive
1 x	Mini side cutters EUROline-Conductive
1 x	Diamond Coated
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Bench Circular Saw KS 230
1 x	ESD Brushe
1 x	ESD Tweezers 5-195
1 x	Round nose pliers 45º EUROline-Conductive
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Belt sander BBS/S
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Pinça SOIC de 8 pinos
1 x	Ball-shaped diamond coated 1.2mm
1 x	IC Test clip 20 pins
1 x	Floor cover ESD
1 x	Belt sander BS/E
2 x	EUROline-Conductive set of pliers
1 x	Tungsten tipped saw blade
1 x	2-speed scroll saw DSH
1 x	Ball-shaped diamond coated 3.2mm
1 x	Solid carbide saw blade
1 x	Ball-shaped diamond coated 2.2mm
1 x	Angle polisher WP/E
1 x	Cutting disc, with reinforcement
1 x	Super-Cut
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Conj 5 pinças ESD
1 x	Replacement glue sticks for HKP 220
1 x	Mini side cutters EUROline-Conductive
1 x	ACCENT SERVICE TOOLS SET
1 x	Crosscut 'Super-Cut' blade
1 x	Diamond blade
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	End side cutters 45º EUROline-Conductive
2 x	Angle cutter 45 °
1 x	Insulation Resistance Tester MG500
1 x	Aluminium Die-Cast
1 x	6-piece set of ESD/EGB tweezers
2 x	10-piece wood router cutter set
1 x	ESD Tweezers 5-194
1 x	ESD Tweezers 5-191
1 x	Multiform grindstone
1 x	MICROMOT steel collet set
1 x	V-slot cutter 6.5mm
1 x	BGA-Bottom-13
1 x	BGA-Bottom-139
1 x	Replacement belts for BSL 220/E
1 x	Sanding pads for OZI 220/E grit 150
1 x	Slot cutter 3.2mm
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	BGA-Bottom-125
1 x	BGA-Bottom-146
1 x	BGA-Bottom-101
1 x	BGA-0246/0243
1 x	Combi cutter 6.5/2.5mm
1 x	Edge cutter with pin 6.4mm
1 x	Three-jaw steel drill chuck
1 x	BGA-Bottom-131
1 x	HSS immersion saw blades for OZI
1 x	BGA-Bottom-149
1 x	Dividing attachment TA 230 for PF 250
1 x	MICROMOT drill stand MB 200
1 x	Flexishaft MICROMOT 110/P
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	BGA-Bottom-14
1 x	Slot cutter 5.0mm
1 x	Half round cutter 13mm
1 x	BGA-Bottom-102
1 x	Sanding pads for OZI 220/E grit 80
1 x	BGA-Bottom-126
1 x	BGA-Bottom-140
1 x	Jig saw blades made of HSS
1 x	HSS immersion saw blades for OZI
1 x	Diamond cutting blade for OZI
1 x	BGA-Bottom-151
1 x	BGA-Bottom-148
1 x	BeeHive204
1 x	Footswitch FS
1 x	Flexishaft MICROMOT 110/BF
1 x	BGA-Bottom-106
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Core box bit 3.2mm
1 x	BGA-Bottom-127
1 x	Replacement carving blades for MSG
1 x	MICROMOT tool holder
1 x	Mill/Drill Unit BFB 2000.
1 x	BGA-Bottom-103
1 x	BGA-Bottom-150
1 x	BGA-Bottom-1
1 x	Sanding pads for OZI 220/E grit 240
1 x	BGA-Bottom-105
1 x	BGA-0245/0241
1 x	BGA-Bottom-10
1 x	HSS cutting blade for OZI

€23,552.75