Top » Catalog » Torque Screwdriver » 4-561

€189.50 + VAT

TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
[4-561]

TORQUE-SCREWDRIVER EUROLINE-POWER

Ergonomical formed two-coloured-components handle

Handle: impact-resistant, two-coloured plastic, with slip off protection and practical hanging up hole.

clear legible micrometer scale for a precise and perfect setting, torque adjusting without setting gauge

Torque mechanism: wear-resistant mechanism from hardened special steel, audible and touchable release signal

Lock mechanism: secure locking device by lock mechanism ( lock point = vernier line )

Actuating mechanism: system with changeable blades, left tightening with more or less unlimited removing, right tightening with adjusted torque.

Torque screwdrivers can be recalibrated and are in accordance with EN ISO 6789:2003

Torque-Screwdriver

Measure range Nm: 0.5 - 1.5
Scale Nm: 0.25
Fine scale mm: 0.05
Drive inner hexagon mm: 4
Length mm: 153
Weight: 137 g

Reviews

Customers who bought this product also purchased

ANTISTATIC 200ml

TORX-screwdrivers T9

ESD Tweezers 5-194

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Long neck angle milling/drilling unit LWB 220/E
2 x	Professional Drill/Grinder IBS/E
2 x	Grinding mop cylinder grit 120
2 x	Grinding mop cylinder grit 120
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
2 x	MICRO Miller MF 70
2 x	Grinding mop cylinder grit 80
1 x	Blade for Steel and brass
2 x	Band knife of hardened spring band steel (without teeth)
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
2 x	Bench drill machine TBM 220
1 x	Blade for Wood and Plastics
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	MICROMOT 50/E
2 x	MICROMOT 230/E
1 x	Diamond blade for MBS 240/E
1 x	Blade guides separately
2 x	Table Saw TKS 2500 SC
2 x	Tungsten carbide cutters set
1 x	Machine Vice MS 4
1 x	MICRO Miller FF 500
2 x	Precision steel vice PM 40
2 x	Hot wire cutter THERMOCUT 650
1 x	Mill/Drill System BFW 40/E
2 x	Tungsten Carbide Tipped (TCT)
2 x	Step clamps made of steel
2 x	surface planing and thicknessing ADH 250
2 x	Wood Lathe DB900
2 x	Hot wire cutter THERMOCUT 12/E
1 x	Supercut jig saw blades of special steel
1 x	Jig saw blades made of HSS
1 x	MICROMOT 50/EF
2 x	Hot wire cutter THERMOCUT 230/E
2 x	Table Sawr TKS 315 E
1 x	Cutting disc, with reinforcement
2 x	Wood Lathe DB450
1 x	Precision drill grinder FBS 12/EF
1 x	Vacum SAA 901
2 x	Telephone pliers bent 205mm
1 x	Independent four jaw chuck for the DB 250
1 x	WCMT050308
1 x	Combination pliers 190mm
1 x	Three-jaw steel drill chuck
1 x	Super-fine sanding discs grain 000
1 x	Mini side cutters EUROline-Conductive
1 x	TCMT090204
1 x	Telephone pliers straight 205mm
1 x	TORX-screwdrivers T10
1 x	Replacement carving blades for MSG
1 x	Earth wire
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Side cutters 160mm
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Cross-recess Screwdrivers Pozidriv 1
1 x	High quality corundum grinding bits
1 x	TORX-screwdrivers T10
1 x	Earth wire
1 x	Multiform grindstone
1 x	EUROline-Conductive set of pliers
1 x	High quality corundum grinding bits
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	High quality corundum grinding bits
1 x	Cotton polishers
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Three jaw chuck for the lathe DB 250
1 x	Mini side cutters EUROline-Conductive
1 x	CM2 - B16 - M10
1 x	Earth wire with dummy Schunko-plug
1 x	TCMT110204
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Cotton polishers
1 x	TORX-screwdrivers T15
1 x	Flat nose pliers 165mm
1 x	MICROMOT steel collet set
1 x	Five piece HSS chisel set
1 x	Round nose pliers 165mm
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Cross-recess Screwdrivers Pozidriv 2
1 x	lathe tools 12mm
1 x	Angle cutter 45 °
1 x	Contact bracelet with spiral cord
1 x	Protective device for hand-operated MICROMOT
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Cotton polishers
1 x	Mini side cutters EUROline-Conductive
1 x	Combination pliers 210mm
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Multipurpose Vices Primus 75

€13,940.14