€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Manufacturers

Information

2 x	BGA-Bottom-10
2 x	BGA-Bottom-11
1 x	BGA-Bottom-115
2 x	BGA-Bottom-1
2 x	BGA-Bottom-111
1 x	BGA-0246/0244
2 x	BGA-Bottom-103
2 x	BGA-Bottom-125
1 x	BGA-Bottom-126
1 x	BGA-Bottom-106
2 x	BGA-0245/0241
1 x	BGA-Bottom-101
2 x	BGA-Bottom-108
3 x	BGA-Bottom-118
2 x	BGA-Bottom-127
1 x	Precision steel vice PM 40
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	DIL40/PLCC68 ZIF AWM-1
1 x	DIL40/TQFP44 ZIF PIC-1
1 x	DIL32/PLCC84 ZIF HS3334ESCF1H
1 x	4-jaw chuck individually clamping 125mm
1 x	Sanding fleece for LWS
1 x	MICROMOT 230/E
1 x	DIL40/TQFP64 ZIF EM652X
1 x	Precision magnetic gauge stand
1 x	DIL28/PLCC32 ZIF EPROM
1 x	Long neck straight drill/grinder LB/E
1 x	MICROMOT 50/EF
1 x	BGA-Bottom-13
1 x	Silicon-Carbide.
1 x	Corundum grinding disc for LWS
1 x	BGA-Bottom-145
1 x	Replacement belts for BSL 220/E
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Footswitch FS
1 x	Polishing Set
1 x	machine base with shelves for D250X550
1 x	Steady rest for D250X550
1 x	BGA-Bottom-146
1 x	DIL48/TQFP100 ZIF PLD-2
1 x	Morse taper MT2 - B16
2 x	DIL48/LQFP64 ZIF M38039/M39049
1 x	Special Fused Alumina (Hardness N).
1 x	3-jaw chuck centrically clamping 125mm
1 x	DIL40/PLCC52 ZIF AWM-1
1 x	BGA-Bottom-148
1 x	DIL40/PLCC44 ZIF AWM-1
1 x	BGA-Bottom-154
1 x	Corundum fan sander for LWS
1 x	3-jaw chuck centrically clamping 100mm
1 x	Diamond-coated cutting and roughing disc
1 x	DIL28/PLCC28 ZIF-CS
1 x	DIL40/TQFP52 ZIF EM652X

€7,596.73