Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0245/0242

€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
  Universal programmers
Service Case->

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Saw blade made of high-alloy special steel
1 x	Crosscut 'Super-Cut' blade
1 x	Solid carbide saw blade
1 x	Diamond blade
1 x	Tungsten tipped saw blade
1 x	DIL32/SDIP32 ZIF 400mil
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-5
1 x	DIL40/TQFP64 ZIF EM652X
3 x	BGA-Bottom-108
3 x	MICROFLAM gas soldering set MGS
1 x	DIL42/SDIP42 ZIF 600mil
3 x	Jig saw STS 12/E
1 x	DIL48/MQFP80 ZIF C500
1 x	DIL48/MQFP80 ZIF C164
1 x	DIL48/TSOP48 ZIF 15.4mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x	DIL48/TQFP100-2 ZIF PLD-1
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	DIL40/TQFP44 ZIF EM652X
1 x	DIL40/TQFP64 ZIF AVRmega-2
1 x	DIL40/TQFP44-1 ZIF MCS51
1 x	Broca de alta duração de 1.0mm
3 x	BGA-0246/0244
1 x	DIL40/MQFP52 ZIF ADuC812
3 x	Scroll saw DS 230/E
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
3 x	MICRO cutter MIC
3 x	BGA-0245/0241
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x	DIL28/TSOP28 ZIF 11,8mm Flash
2 x	Bench Circular Saw KS 230
3 x	BGA-Bottom-11
3 x	BGA-Bottom-10
1 x	DIL48/TQFP144 ZIF ST10-1
1 x	DIL40/TSOP40 ZIF 18.4mm
1 x	DIL44/TQFP44-2 ZIF
3 x	MICRO shaper MP 400
1 x	DIL40/TQFP80-1 ZIF AWM-1
1 x	DIL40/TQFP44 ZIF PIC-1
3 x	Surface planer AH 80
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-2
1 x	DIL32/TSOP32 ZIF 11.8mm
3 x	MICROFLAME burner MFB/E
3 x	BGA-Bottom-101
1 x	DIL40/TQFP80-1 ZIF PIC-1A
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	DIL32/TSOP32 ZIF 12.4mm Flash
3 x	BGA-0246/0243
1 x	DIL44/TSOP44-II ZIF 400mil
2 x	Gear Chuck
1 x	DIL40/TQFP64 ZIF CC-1
1 x	DIL32/SDIP64 ZIF H8-1
1 x	DIL48/TQFP100 ZIF ST92Fxxx
2 x	BGA-Bottom-126
1 x	DIL48/TQFP100 ZIF PLD-2
1 x	DIL48/TQFP48-1 ZIF
1 x	DIL44/TQFP44-1 Zif
3 x	BGA-Bottom-103
1 x	DIL48/LQFP64 ZIF M16C/Tiny
1 x	DIL48/LQFP64 ZIF M38039/M39049
1 x	DIL44/TQFP44-3 ZIF
1 x	DIL32/SDIP64-1 ZIF Toshiba-BM1136
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	DIL40/SDIP52 ZIF 55x
1 x	DIL40/TSOP40 ZIF 18.4mm Flash-1
1 x	Independent four jaw chuck for the DB 250
3 x	BGA-0245/0243
1 x	DIL48/TQFP64 ZIF HC908-1
1 x	DIL40/TQFP52 ZIF EM652X
1 x	DIL40/TQFP64 ZIF PIC-1A
2 x	BGA-Bottom-127
3 x	BGA-Bottom-118
3 x	BGA-Bottom-125
1 x	DIL48/TSOP48 ZIF 18.4mm
3 x	BGA-Bottom-102
3 x	BGA-Bottom-105
1 x	DIL48/SDIP56 ZIF 68HC05Bx
2 x	Fixed Steady
2 x	Radius Cutting Attachment, complete with pointed tool
1 x	DIL40/TSOP40 ZIF-CS 12.4mm
3 x	BGA-Bottom-111
1 x	DIL40/TQFP44 ZIF AWM-1
1 x	DIL28/TSOP28 ZIF 11.8 mm
1 x	DIL32/PLCC32 ZIF-CS NOR-1
3 x	Sanding pads for OZI 220/E grit 80
1 x	Diamond Grinding Bits 1mm
1 x	Diamond Grinding Bits 1,8mm
1 x	DIL32/PLCC32 ZIF
1 x	DIL40/PLCC44 ZIF PIC-1
2 x	Bottom PSOP44 NOR-1
2 x	Diamond Cutting Discs
1 x	DIL40/MLF64 ZIF-CS AVR-1
1 x	DIL32/PLCC32 ZIF-CS
2 x	DIL28/PLCC32 ZIF EPROM
1 x	DIL44/MLF44-1 ZIF-CS
2 x	DIL20/PLCC20 ZIF-CS
1 x	DIL40/PLCC68 ZIF DS87C550
1 x	Ball-shaped diamond coated 1.2mm
2 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	Diamond Grinding Bits 5mm
1 x	DIL32/PLCC84 ZIF HS3334ESCF1H
1 x	Diamond Grinding Bits 1,8mm
1 x	Diamond Twist Drills
1 x	Ball-shaped diamond coated 3.2mm
1 x	Corundum fan sander for LWS
2 x	DIL28/PLCC28 ZIF
2 x	Diamond Cutting Discs
1 x	DIL40/PLCC68 ZIF AWM-1
1 x	DIL40/PLCC44 ZIF W-EPROM / MCS51
1 x	DIL40/PLCC52 ZIF DS87C530
2 x	Motor-driven carving device MSG
1 x	DIL40/PLCC52 ZIF AWM-2
1 x	DIL40/PLCC28 ZIF AWM-1
1 x	DIL40/PLCC52 ZIF AWM-1
2 x	Diamond Cutting Discs
3 x	HSS immersion saw blades for OZI
1 x	DIL40/VQFP64 ZIF AWM-1
1 x	DIL40/PLCC52 ZIF MCS51-2
2 x	DIL28/PLCC28 ZIF-CS
2 x	DIL20W/PLCC20 ZIF
1 x	Ball-shaped diamond coated 2.2mm
2 x	Sanding pads for OZI 220/E grit 150
1 x	DIL40/PLCC44 ZIF AWM-1
2 x	Cut off/mitre saw KGS 80
1 x	Diamond Cutting Discs
1 x	DIL32/MLF32-1 ZIF
1 x	DIL40/QFP64-3 ZIF NEC-1
2 x	Complete Engraving Kit with trial glass
2 x	DIL24/TSSOP24 ZIF 170mil
1 x	HSS twist drill set to DIN 338
1 x	DIL48/QFP100 ZIF PLD-1
1 x	DIL40/QFP64-4 ZIF NEC-1
1 x	Slot cutter 5.0mm
1 x	DIL28/QFP64 ZIF H8/3644
1 x	DIL48/QFP100 ZIF PLD-2
2 x	Router base OFV
1 x	DIL40/QFP64-2 ZIF-CS NEC-1
1 x	HSS drill bits 1.6mm
1 x	DIL28/QFP52 ZIF-CS SX52
1 x	Tungsten carbide drills Ø1,5mm
1 x	DIL48/QFP100 ZIF NEC-2
1 x	DIL8/SOT23-6 ZIF-CS PIC
2 x	Engraving tool GG
1 x	DIL40/QFP100 ZIF AVR-1
3 x	Multipurpose Vices Primus 75
2 x	Footswitch FS
1 x	Steel cups
1 x	DIL48/QFP100 ZIF PLD-4
1 x	Slot cutter 3.2mm
2 x	MICRO Heat gun MH 550
1 x	Rebating cutter 6.4mm
1 x	Angle cutter 45 °
1 x	DIL40/QFP80 ZIF M37702
1 x	DIL48/QFP100 ZIF NEC-1
1 x	Tungsten carbide drills Ø2mm
1 x	10-piece wood router cutter set
1 x	Combi cutter 6.5/2.5mm
1 x	Stainless steel brushes
1 x	DIL40/QFP144 ZIF H8S-1
1 x	Conjunto de três brocas de ponto
1 x	HSS drill bits 1.2mm
1 x	DIL32/QFP64 ZIF H8-1
1 x	sandpaper for PS 13 Grit 240
1 x	V-slot cutter 6.5mm
1 x	Steel brushes
1 x	Cups brushes
3 x	Machine Vice MS 4
1 x	Compact workshop vacuum cleaner CW-matic
3 x	Tungsten Carbide Tipped (TCT)
2 x	DIL24/QSOP24 ZIF 150mil
1 x	Stainless steel cups
1 x	HSS drill bits 1.0mm
1 x	DIL48/QFP100 ZIF PLD-3
1 x	DIL40/QFP64 ZIF LPC-1
1 x	HSS twist drill set with centring pin
1 x	Rounding over cutter 6.4mm
2 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Tungsten carbide drills Ø1mm
1 x	Brass brushes
1 x	DIL48/QFP100 ZIF MSP430-1
1 x	MICRO-screwdrivers
2 x	Chuck for TBM 220
1 x	Stainless steel wheels
1 x	DIL48/QFP100 ZIF MB90F-1
1 x	Slot cutter 6.5mm
1 x	Half round cutter 13mm
1 x	Wheels brushes
1 x	Collet Set for accurate use on round components
1 x	DIL40/QFP144 ZIF LPC-1
1 x	Steel wheels
1 x	HSS drill bits 0.8mm
3 x	Precision steel vice PM 40
1 x	Edge cutter with pin 6.4mm
1 x	DIL28/TSSOP28 ZIF 170mil
1 x	HSS drill bits 0.5mm
1 x	Core box bit 3.2mm
2 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	Micro Compound Table KT 70
1 x	DIL40/QFP64-1 ZIF-CS NEC-1
2 x	HSS immersion saw blades for OZI
1 x	Flame shaped milling cutters
1 x	DIL48/PQFP80 ZIF M58BW-1
1 x	Wolfram vanadium steel milling bits
1 x	DIL34/SSOP34 ZIF 200 mil
1 x	High quality corundum grinding bits
1 x	Sanding bands 14x13mm
1 x	Fibre-Cut Discs
1 x	Sanding Drums
1 x	Sanding bands 14x13mm
1 x	Sanding Drums
1 x	High quality corundum grinding bits
1 x	Milling cutter set (6 - 10mm)
1 x	Ball shaped milling cutters
1 x	Sanding Drums
1 x	High quality corundum grinding bits
1 x	DIL8/SSOP8 ZIF 120mil
2 x	Super-Cut
1 x	DIL44/SSOP44 ZIF 240mil
2 x	Bottom PSOP44 NOR-3
1 x	Top PSOP44 ZIF 600mil
1 x	DIL48/SSOP56 ZIF Flash-2
1 x	Cone shaped milling cutter
1 x	Set of special steel cutters
2 x	Solid carbide stylus for engraving
1 x	Tungsten carbide cutter 3.0mm
1 x	Disc cutters
1 x	Fibre-Cut Discs
1 x	High quality corundum grinding bits
2 x	HSS cutting blade for OZI
1 x	Solid carbide stylus for engraving
1 x	DIL48/SSOP70 ZIF OKI-1
1 x	Nylon Fleece Brushes
1 x	DIL48/PQFP144 ZIF ST10-1
1 x	Sanding Discs
1 x	Tungsten carbide cutters set
1 x	Wolfram vanadium steel milling bits
1 x	Flap Wheels
1 x	Fibre-Cut Discs
1 x	DIL48/PQFP100 ZIF ST10-1
1 x	DIL48/SSOP56 ZIF Flash-1
1 x	Tungsten carbide cutter 2.0mm
1 x	DIL48/PQFP100 ZIF PLD-1
1 x	High quality corundum grinding bits
1 x	Flap Wheels
1 x	Set of precision cutters
1 x	Hot wire cutter THERMOCUT 650
1 x	Professional set for finish grinding and polishing
1 x	Sanding Drums
2 x	Bottom PSOP44 NOR-2
1 x	Cylinder shaped milling cutters
1 x	MICRO Band Saw MBS 240/E
1 x	DIL48/SSOP48 ZIF 300mil
1 x	Table Saw FET
1 x	Tungsten carbide cutter 1.0mm
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Super jig saw STS/E
1 x	Fibre-Cut Discs
1 x	Cylindrical cutters
1 x	Metal Cutting Blades
1 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
1 x	DIL48/SSOP56 ZIF Flash-3
2 x	Diamond cutting blade for OZI
1 x	Diamond Coated
1 x	Sanding Discs
1 x	DIL44/PSOP44 ZIF 600 mil
1 x	Hot wire cutter THERMOCUT 230/E
1 x	DIL34/SSOP34-1 ZIF-CS
1 x	Milling cutter set (2 - 5mm)
1 x	High quality corundum grinding bits
1 x	DIL48/SSOP90 ZIF Flash-1
1 x	MICRO woodturning lathe DB 250
1 x	High quality corundum grinding bits
1 x	DIL48/PQFP100 ZIF ST92Fxxx
1 x	High quality corundum grinding bits
2 x	Precision Vice FMZ
1 x	BGA-Bottom-141
1 x	BGA-Bottom-132
1 x	BGA-Bottom-148
1 x	BGA-Bottom-145
1 x	BGA-Bottom-138
2 x	Precision Vice FMS 75
1 x	Broca de alta duração de 2.6mm
1 x	BGA-Bottom-149
1 x	BGA-Bottom-144
2 x	Multipurpose Vices Primus100
1 x	BGA-Bottom-14
1 x	BGA-Bottom-147
1 x	BGA-Bottom-140
1 x	Sanding pads for OZI 220/E grit 240
1 x	BGA-Bottom-131
1 x	BGA-Bottom-15
1 x	BGA-Bottom-13
1 x	BGA-Bottom-146
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	DIL16/SOIC16 ZIF 200 mil
1 x	DIL18W/SOIC18 ZIF 300mil
2 x	BeeHive208S
1 x	BGA-Bottom-157
1 x	BGA-Bottom-174
1 x	BGA-Bottom-173
1 x	BGA-Bottom-165
2 x	BGA-Bottom-106
1 x	BGA-Bottom-177
1 x	BGA-Bottom-180
1 x	BGA-Bottom-19
1 x	BGA-Bottom-166
1 x	BGA-Bottom-18
2 x	BGA-Bottom-1
1 x	DIL16W/SOIC16 ZIF 150mil
1 x	BGA-Bottom-169
2 x	BGA-Bottom-115
1 x	BGA-Bottom-170
1 x	BGA-Bottom-151
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	BeeProg2
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	Beeprog2C
1 x	BGA-Bottom-16
1 x	BGA-Bottom-171
1 x	BGA-Bottom-164
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	BGA-Bottom-150
1 x	BGA-Bottom-153
1 x	BGA-Bottom-187
1 x	DIL20/SOIC20 ZIF 200mil
2 x	BeeHive204
1 x	BGA-Bottom-167
1 x	BGA-Bottom-154

€68,889.38