magnifier 3.25 x Ø 45mm with additional lens, Oficina-digital.com

Top » Catalog » Magnifying » Hand magnifier » 2-292

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Hand magnifier
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Lathe System PD 400
1 x	Three piece thread cutting set
1 x	Flap Wheels
1 x
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Blade for Steel and brass
1 x	HSS cutting blade for OZI
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Blade for Wood and Plastics
1 x	Mini side cutters EUROline-Conductive
1 x	Dividing attachment TA 230 for PF 250
1 x	Crocodile clip
1 x	Round nose pliers 45º EUROline-Conductive
1 x	Grinding mop cylinder grit 120
1 x	Hand magnifier with LED light 3X
1 x	Diamond-coated cutting and roughing disc
1 x	Earth wire with dummy Schunko-plug
1 x	Inpection mirror 1-978
2 x	Precision lathe PD 250/E
1 x	Sanding pads for OZI 220/E grit 80
1 x	Sanding pads for OZI 220/E grit 150
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Hot wire cutter THERMOCUT 12/E
1 x	surface planing and thicknessing ADH 200
2 x	Router base OFV
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	HSS immersion saw blades for OZI
2 x	Cylinder sander WAS/E
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Grinding mop cylinder grit 240
2 x	Super-fine sanding discs grain 000
1 x	End side cutters EUROline-Conductive
1 x	Footswitch FS
1 x	Hot wire cutter THERMOCUT 650
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Replacement carving blades for MSG
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Mini side cutters EUROline-Conductive
1 x	Engraving tool GG
1 x	Universal and oil siphoning pump AP 12
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Independent four jaw chuck for the DB 250
1 x	Five piece HSS chisel set
1 x	ESD Brushe
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Inspector mirror
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Sanding pads for OZI 220/E grit 240
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x	Lathe tools 10mm pastilhados
2 x	Replacement glue sticks for HKP 220
1 x	sanding belts for BBS/s Grit 150
1 x	Centre Turning Attachment
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Warding files set, 6pcs
2 x	Grinding mop cylinder grit 80
1 x	Contact bracelet with spiral cord
1 x	Earth wire
2 x	Grinding mop cylinder grit 120
1 x	HSS boring tool set, 6 pieces
1 x	Chuck for TBM 220
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Side cutters EUROline-Conductive
1 x	Diamond-coated cutting disc for MIC
2 x	Three jaw chuck for the lathe DB 250
1 x	Diamond blade for MBS 240/E
1 x	6pcs Double Open End wrench set
1 x	Blade guides separately
1 x	MICROFLAM gas soldering set MGS
1 x	ESD Brushe
1 x	EUROline-Conductive set of pliers
1 x	Three-jaw steel drill chuck
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
2 x	Professional set for finish grinding and polishing
1 x	Replacement belts for BSL 220/E
1 x	Cutting disc, with reinforcement
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Morse taper MT2 - B16
1 x	Quick-action tool holder kit SWH AA
1 x	Conj 5 pinças ESD
1 x	Tungstein carbide rasp - and cutting disc
1 x	machine base with shelves for D250X550
1 x	centrically clamping 125mm
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Professional polishing sponge
1 x	Collet chuck ER25 for D250X550
1 x	Lathe chuck flange for D250X550
1 x	Follow rest for D250X550
1 x	Steady rest for D250X550
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Tool holder type H for SWH 1-A
1 x	BeeHive208S
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	lathe tools 10mm
1 x	3-jaw chuck centrically clamping 125mm
1 x	quantum revolving center CM2
1 x	Vacum SAA 901
1 x	BeeHive204

€21,615.46