€65.44 + VAT

MICROMOT 230/E
[28440]

MICROMOT 230/E
For drilling, milling, grinding, polishing, brushing, cutting and engraving. The extremely slim housing of glass-fibre reinforced POLYAMIDE with a soft component grip area enables the unit to be handled with two fingers (pen grip). Balanced, low noise special DC motor with high life expectancy. The maximum speed of 21,500rpm can be continuously reduced to 6,500rpm through full-wave electronics. Offering nearly the same torque also in the lower speed range. This is especially important for micro drilling, brushing and polishing. Ground, ball-bearing spindle. High quality MICROMOT steel collets: Even the smallest shafts are accurately clamped. No rattling or vibrating of bits and cutters. Spindle for tool exchange can be locked at the push of a button. 20mm collar for use in MICROMOT drill stands and horizontal stands. Includes MICROMOT steel collets (1 each of 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm). Technical data: 220 - 240 V. 50Hz. 80W. 6,500 - 21,500rpm. Weight 270g. Class 2 insulation.
Reviews

Manufacturers
1 x Round nose pliers 160mm
1 x Micro Compound Table KT 70
1 x Telephon pliers bent 160mm
1 x Combination pliers 205mm
1 x Footswitch FS
1 x DIL32/SDIP64-1 ZIF Toshiba-BM1136
1 x Tungsten tipped saw blade
1 x Flexishaft MICROMOT 110/P
1 x MICROMOT tool holder
1 x DIL48/SDIP56 ZIF 68HC05Bx
1 x Side cutters 180mm
1 x 14-piece parallel supports set
1 x Super-fine sanding discs grain 000
1 x Telephon pliers bent 200mm
1 x Solid carbide saw blade
1 x Mill/Drill Unit BFB 2000.
1 x Diamond blade
1 x DIL40/SDIP52 ZIF 55x
1 x MICROMOT extension cord. 300cm.
1 x Multiform grindstone
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Replacement carving blades for MSG
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x DIL32/SDIP32 ZIF 400mil
1 x Flexishaft MICROMOT 110/BF
1 x Flat nose pliers 160mm
1 x MICROMOT steel collet set
1 x Dividing attachment TA 230 for PF 250
1 x DIL48/SSOP70 ZIF OKI-1
1 x Three-jaw steel drill chuck
1 x Diamond-coated cutting and roughing disc
1 x Tungstein carbide rasp - and cutting disc
1 x MICRO Heat gun MH 550
1 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Backing disc for LWS
1 x Corundum sanding discs for LWS
1 x Corundum grinding disc for LWS
1 x Complete Engraving Kit with trial glass
1 x Sanding fleece for LWS
1 x Wood Lathe DB450
1 x Grinding mop cylinder grit 240
1 x MICROFLAM gas soldering set MGS
1 x MICROFLAME burner MFB/E
1 x MICROMOT glue gun HKP 220
1 x Corundum fan sander for LWS
1 x Corundum grinding disc for LWS
1 x Sanding fleece for LWS
1 x Corundum bound cutting disc for LWS
1 x Corundum fan sander for LWS
1 x Router base OFV
1 x Precision steel vice PM 40
1 x Machine Vice MS 4
1 x Step clamps made of steel
2 x ESD Tweezers 5-195
1 x Thicknesser DH 40
1 x Bench Circular Saw KS 230
1 x Jig saw STS 12/E
1 x Cut off/mitre saw KGS 80
2 x Ceramic-tipped tweezers and ESD 5-095
1 x Crocodile clip
1 x Contact bracelet with spiral cord
1 x Earth wire with dummy Schunko-plug
1 x Scroll saw DS 230/E
1 x MICRO cutter MIC
1 x ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x Conj 5 pinças ESD
1 x MICRO woodturning lathe DB 250
1 x Earthing module
1 x 2-speed scroll saw DSH
1 x Surface planer AH 80
1 x Table Sawr TKS 315 E
1 x Table Saw FET
1 x ESD Tweezers 5-191
1 x 6-piece set of ESD/EGB tweezers
€5,636.07
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook