€1,799.00 + VAT

Lathe System PD 400
[24400]

Lathe System PD 400

Lathe System PD 400

Lathe PD 400 is unequalled in its class. Don't waste your time if you are trying to find similar value for money.

Ideal for straight and cross cuts, taper turning, internal and external thread cutting slotting etc. Useable on materials such as steel, non-ferrous metals (aluminum, brass etc.). Negligible variances even under heavy loads.
Ground and hardened beds of ribbed construction for highest precision and stability. The wide range of accessories complements the lathe's functions. The bed is equipped with a milled surface for securing mill/drill PF 400.

  1. Supplied with change gears for thread cutting in 19 steps (0,2 - 3,0 mm). Clearly positioned and easy to change.
  2. Main switch with emergency stop function and restart protection.
  3. Quality, precision 3 jaw chuck with 100 mm capacity.
  4. Powerful capacitor motor with 550 W output.
  5. Quick-change tool post with 2 holders (fitted with adjustable height and stop).
  6. Includes MT2 rotating centre in tailstock.
  7. Easy to use hand wheel of aluminum with adjustable scale of steel. 1 division = 0.05 mm.
  8. Fully enclosed leadscrew with Acme thread (12 x 1.5).
  9. Cross-braced cast iron bed with wide, ground ways.
  10. Handwheel for quick support change.
  11. Switch for clockwise, off and counter-clockwise rotation.
  12. Selector for auto feed.
     

Technical Data:
Centre distance 400 mm, centre height 85 mm. The swing over the top slide is 116 mm (!). Solid, ribbed bed is made of quality cast iron with ground and hardened ways. Oversized spindle with 2 adjustable taper bearings, MT 3 taper and 20.5 mm bore. Run-out, without chuck, 5/1,000 mm.

The precision 3 jaw chuck has a capacity of up to 100 mm. Six spindle speeds are provided via belt drive: Level 1: 80 / 330 / 1,400 rpm; Level 2: 160 / 660 / 2,800 rpm. Powerful, quiet capacitor motor with 550 W output. All adjusting wheels fitted with scales that may be zeroed. 1 division = 0.05 mm. The auto feed has speed of 0.07 or 0.14 mm/rev.

An integrated gearbox with change gears provides 19 pitches: 0.2 - 0.25 - 0.3 - 0.35 - 0.4 - 0.45 - 0.5 - 0.6 - 0.7 - 0.75 - 0.8 - 0.9 - 1.0 - 1.25 - 1.50 - 1.75 - 2.0 - 2.5 - 3.0 mm. Imperial threads of 10 - 48 TPI are also possible. A rotating centre MK 2 and 10 mm MT 2 gear chuck are included. Cross slide travel 85 mm and topslide 55 mm. Swivels through 45° for taper turning. Toolstock with MT 2 (short), spindle travel 40 mm and Ø 24 mm. Supplied with scale. Approx. size 900 x 400 x 300 mm. Weight approx. 45 kg. For cutters of 10 x 10 mm.

Including individual quick-change holders.
 

Reviews
Manufacturers
1 x Bench drill press TBH
1 x MICROMOT 230/E
1 x IC tweezers
1 x MICRO Miller MF 70
1 x Broca de ponto 3.15 x 1.25
1 x Long neck straight drill/grinder LB/E
1 x MICROMOT 50/EF
1 x MICRO Miller FF 230
1 x PLCC Extractor
1 x Mill/Drill System BFW 40/E
1 x Cutter head for copy and surface milling MT3
1 x TU 2404
1 x 4-jaw chuck individually clamping 80mm
1 x Dial gauge
1 x 4-jaw chuck individually clamping 100mm
1 x Cutter head for copy and surface milling MT2
1 x Cutting tool 10 mm
1 x centrically clamping 125mm
1 x 3-jaw chuck centrically clamping 160mm
1 x DCMT070204
1 x Cutting tool HM 20 mm
1 x 3-jaw chuck centrically clamping 80mm
1 x Cutting tool 8 mm
1 x CM2 - B16 - M10
1 x End milling cutter kit HSS 12 pcs
1 x 3-jaw chuck centrically clamping 100mm
1 x Cutting tool 16 mm
1 x TU 1503V
1 x 3-jaw chuck centrically clamping 125mm
1 x 4-jaw chuck individually clamping 125mm
1 x centrically clamping 100mm
1 x TU 2004V
1 x Cutting disc, with reinforcement
1 x Gear Chuck
1 x Four Jaw Chuck
1 x Boring Bar for DCMT 10mm
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Broca de alta duração de 2.1mm
1 x Centre Turning Attachment
1 x Tool holder for rotary tools
1 x Hand magnifier with LED light 3X
1 x Broca de alta duração de 2.4mm
1 x Silicon-Carbide.
1 x Special Fused Alumina (Hardness N).
1 x Coarse-toothed (25 TPI per 25mm)
1 x V-slot cutter 6.5mm
1 x Angle cutter 45 °
1 x MICROMOT Mains Adapter NG 2/S
1 x Coarse-toothed (18 TPI per 25mm)
1 x Broca de alta duração de 2.7mm
1 x Broca de alta duração de 2.3mm
1 x Lathe tools 10mm pastilhados
1 x Collet Set for accurate use on round components
1 x Broca de alta duração de 3.0mm
1 x Rebating cutter 6.4mm
1 x Boring Bar for CCMT 16mm
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x IC Test clip 20 pins
1 x DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
€9,429.38
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook