Top » Catalog » Micromot tools » ACCESSORIES » Mains adaptor » 28704

€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Hot wire cutter THERMOCUT 12/E
Hot wire cutter THERMOCUT 230/E	MICROFLAME burner MFB/E	Spare cutting wire

Categories

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Cross-recess Screwdrivers Pozidriv 2
1 x	Earth wire
1 x	Cross-recess Screwdrivers 00
1 x	Crocodile clip
1 x	Cross-recess Screwdrivers 0
1 x	Cross-recess Screwdrivers 000
1 x	Cross-recess Screwdrivers 2
1 x	Earth wire with dummy Schunko-plug
1 x	Earth wire
1 x	Earthing module
1 x	Cross-recess Screwdrivers 2
1 x	Cross-recess Screwdrivers 1
3 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Mini side cutters EUROline-Conductive
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
3 x	MICROMOT tool holder
1 x	Motor-driven carving device MSG
3 x	Mill/Drill Unit BFB 2000.
1 x	Mini side cutters EUROline-Conductive
3 x	Aluminium Die-Cast
3 x	Grinding mop cylinder grit 120
1 x	Mini side cutters EUROline-Conductive
3 x	Dividing attachment TA 230 for PF 250
1 x	End side cutters EUROline-Conductive
2 x	sanding belts for BBS/s Grit 80
3 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
3 x	Milling cutter set (6 - 10mm)
1 x	MICRO shaper MP 400
2 x	Flexible silicon discs
3 x	Milling cutter set (2 - 5mm)
2 x	sanding belts for BBS/s Grit 150
3 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Flexishaft MICROMOT 110/BF
2 x	Flexible polishing pad set
2 x	Tungsten Carbide Tipped (TCT)
1 x	Jig saw STS 12/E
3 x	Spiral blade. 125mm long with plain ends (without pins).
2 x	Flexible silicon discs
2 x	Micro Compound Table KT 70
2 x	Felt polishers
3 x	Blade holders for DS 460
2 x	MICROMOT drill stand MB 200
3 x	Coarse-toothed (25 TPI per 25mm)
3 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Three-jaw steel drill chuck
1 x	14-piece parallel supports set
3 x	V-slot cutter 6.5mm
3 x	Rounding over cutter 6.4mm
1 x	Flexishaft MICROMOT 110/P
1 x	Footswitch FS
2 x	Diamond Cutting Discs
3 x	Edge cutter with pin 6.4mm
3 x	Core box bit 3.2mm
3 x	Slot cutter 3.2mm
3 x	Slot cutter 6.5mm
2 x	Felt polishers
1 x	Polishing paste
2 x	Angle cutter 45 °
1 x	Universal polishing paste
1 x	sanding belts for BBS/s Grit 240
1 x	Felt polishers
1 x	Felt polishers
1 x	Cotton polishers
2 x	Combi cutter 6.5/2.5mm
1 x	Grinding mop cylinder grit 240
1 x	Slot cutter 5.0mm
1 x	Grinding mop cylinder grit 80
1 x	IC Test clip 20 pins
1 x	Flexible silicon discs
1 x	Microfibre polishing wheel, 15-ply (100mm)
2 x	Coarse-toothed (18 TPI per 25mm)
2 x	Coarse-toothed (10 TPI per 25mm)
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Cutting disc, with reinforcement
1 x	HSS drill bits 0.5mm
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	MICROMOT 230/E
1 x	Cut off/mitre saw KGS 80
1 x	Super-Cut
1 x	Precision lathe PD 250/E
1 x	Fine dust paper filter for CW-matic

€4,940.62