Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0254/0241

€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
  Universal programmers
Service Case->

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	HSS boring tool set, 6 pieces
2 x	Flexible polishing pad set
1 x	IC Test clip 20 pins
1 x	Replacement carving blades for MSG
2 x	Fibre-Cut Discs
2 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Flexible polishing pad set
1 x	Flap Wheels
1 x	Pinça SOIC de 8 pinos
2 x	Tungsten carbide cutters set
2 x	Milling cutter set (6 - 10mm)
3 x	High quality corundum grinding bits
2 x	Fibre-Cut Discs
2 x	Five piece HSS chisel set
1 x	MICROMOT steel collet set
4 x	High quality corundum grinding bits
1 x	HSS twist drill set with centring pin
2 x	Conjunto de três brocas de ponto
3 x	High quality corundum grinding bits
3 x	High quality corundum grinding bits
3 x	MICROMOT Mains Adapter NG 2/E
1 x	Thicknesser DH 40
3 x	Corundum sanding discs for LWS
2 x	MICROMOT Mains Adapter NG 2/S
1 x	Backing disc for LWS
3 x	Corundum fan sander for LWS
2 x	Diamond Cutting Discs
1 x	Polishing Set
2 x	Professional set for finish grinding and polishing
2 x	Diamond Coated
3 x	High quality corundum grinding bits
2 x	Corundum fan sander for LWS
2 x	Replacement belts for BSL 220/E
2 x	Diamond Cutting Discs
2 x	MICROMOT Mains Adapter NG 5/E
2 x	Diamond Cutting Discs
1 x	Super safety and specialty bit set, 75-piece
5 x	High quality corundum grinding bits
2 x	Corundum grinding disc for LWS
1 x	HSS drill bits 0.5mm
4 x	Replacement cutting disc for MICRO cutter MIC
1 x	HSS drill bits 1.2mm
1 x	Fixed Steady
1 x	Felt polishers
1 x	MICROMOT drill stand MB 200
1 x	Collet Set for accurate use on round components
1 x	Mill/Drill Unit BFB 2000.
3 x	Hot wire cutter THERMOCUT 230/E
2 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
3 x	Engraving tool GG
1 x	10-piece wood router cutter set
3 x	Diamond-coated cutting disc for MIC
2 x	Felt polishers
1 x	Flame shaped milling cutters
1 x	HSS drill bits 1.6mm
1 x	Replacement belts for BSL 220/E
1 x	Protective device for hand-operated MICROMOT
1 x	Sanding bands 14x13mm
1 x	Replacement belts for BSL 220/E
1 x	HSS twist drill set to DIN 338
1 x	Wolfram vanadium steel milling bits
1 x	Sanding bands 14x13mm
1 x	Sanding Drums
1 x	Fine dust paper filter for CW-matic
1 x	Replacement belts for BSL 220/E
1 x	Sanding Discs
1 x	Wolfram vanadium steel milling bits
2 x	Felt polishers
1 x	Metal Cutting Blades
2 x	Felt cloth polishing disc (100 x 15mm)
2 x	Fibre-Cut Discs
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Tungsten carbide drills Ø1mm
1 x	Nylon Fleece Brushes
1 x	Sanding Drums
1 x	Super-Cut
1 x	Cut off/mitre saw KGS 80
1 x	Super-fine sanding discs grain 400
1 x	HSS cutting blade for OZI
2 x	Dividing attachment TA 230 for PF 250
2 x	Diamond cutting blade for OZI
1 x	Sanding fleece for LWS
1 x	Bench drill press TBH
1 x	Cotton polishers
2 x
1 x	Centre Turning Attachment
2 x	Cutting disc, with reinforcement
2 x	Grinding mop cylinder grit 240
2 x	Pensander PS 13
1 x	Diamond-coated cutting and roughing disc
1 x	PLCC Extractor
2 x	Step clamps made of steel
2 x	Diamond Cutting Discs
1 x	Independent four jaw chuck for the DB 250
2 x	Microfibre polishing wheel, 15-ply (100mm)
2 x	Corundum bound cutting disc for LWS
1 x	Universal and oil siphoning pump AP 12
1 x	Lambswool polishing disc
1 x	Three-jaw steel drill chuck
1 x	Tungsten Carbide Tipped (TCT)
1 x	Super-fine sanding discs grain 000
2 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Disc Sander TG 250/E
2 x	Flap Wheels
1 x	Cylindrical cutters
2 x	Flexible silicon discs
1 x	Cups brushes
2 x	Chuck for TBM 220
2 x	Cotton polishers
1 x	Diamond blade for MBS 240/E
1 x	Replacement glue sticks for HKP 220
1 x	Crosscut 'Super-Cut' blade
2 x	Flexible silicon discs
1 x	Delta sander OZI/E
1 x	Diamond Grinding Bits 1,8mm
2 x	Flexible silicon discs
1 x	Super-fine sanding discs grain 2000
1 x	Disc Sander TG 125/E
1 x	Diamond Grinding Bits 5mm
1 x	Sanding fleece for LWS
1 x	Cylinder shaped milling cutters
1 x	Cotton polishers
1 x	Core box bit 3.2mm
1 x	Diamond Grinding Bits 1mm
2 x	BGA-Bottom-103
3 x	BGA-Bottom-106
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-2
1 x	Grinding mop cylinder grit 80
1 x	Solid carbide stylus for engraving
1 x	BGA-Bottom-88
1 x	DIL32/TSOP32 ZIF 11.8mm
1 x	Fluted filter for CW-matic
1 x	Precision steel vice PM 40
3 x	BGA-Bottom-118
3 x	BGA-Bottom-1
2 x	BGA-Bottom-127
1 x	Hand Magnifier 2-293
2 x	Broca de alta duração de 2.0mm
1 x	DIL40/TSOP40 ZIF-CS 12.4mm
2 x	sanding belts for BBS/s Grit 150
3 x	BGA-Bottom-115
2 x	BGA-0245/0243
1 x	DIL24/QSOP24 ZIF 150mil
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
2 x	Broca de alta duração de 1.2mm
1 x	DIL28/TSSOP28 ZIF 170mil
2 x	BGA-0245/0242
1 x	Half round cutter 13mm
1 x	Grinding and Polishing Machine SP/E
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x	DIL40/VQFP64 ZIF AWM-1
1 x	Four Jaw Chuck
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x	DIL28/TSOP28 ZIF 11.8 mm
1 x	DIL48/TSOP48 ZIF 18.4mm
1 x	Flexishaft MICROMOT 110/BF
2 x	Broca de alta duração de 0.8mm
1 x	Grinding mop cylinder grit 120
1 x	DIL32/TSOP32 ZIF 12.4mm Flash
2 x	DIL24/TSSOP24 ZIF 170mil
2 x	Broca de alta duração de 2.1mm
1 x	DIL44/TSOP44-II ZIF 400mil
1 x	Grinding mop cylinder grit 120
2 x	BGA-Bottom-102
1 x	Gear Chuck
2 x	Broca de alta duração de 2.2mm
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
2 x	BGA-0245/0241
1 x	DIL48/TSOP48 ZIF 15.4mm
1 x	Footswitch FS
1 x	DIL28/TSOP28 ZIF 11,8mm Flash
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	Flexishaft MICROMOT 110/P
3 x	BGA-0246/0243
1 x	DIL40/TSOP40 ZIF 18.4mm
2 x	BGA-Bottom-111
1 x	Broca de alta duração de 0.7mm
1 x	DIL40/TSOP40 ZIF 18.4mm Flash-1
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	DIL40/PLCC28 ZIF AWM-1
1 x	BGA-Bottom-135
2 x	Coarse-toothed (10 TPI per 25mm)
1 x	DIL48/TQFP144 ZIF ST10-1
1 x	DIL48/TQFP100 ZIF ST92Fxxx
1 x	BGA-Bottom-215
1 x	BGA-Bottom-211
1 x	DIL32/MLF32-1 ZIF
1 x	BGA-Bottom-138
1 x	BGA-Bottom-126
1 x	BGA-Bottom-208
1 x	DIL40/TQFP44-1 ZIF MCS51
1 x	DIL48/QFP100 ZIF NEC-2
1 x	BGA-Bottom-139
1 x	DIL40/TQFP44 ZIF AWM-1
1 x	BGA-Bottom-195
1 x	DIL48/TQFP64 ZIF HC908-1
1 x	BGA-Bottom-149
1 x	DIL40/TQFP64 ZIF CC-1
1 x	BGA-Bottom-207
1 x	BGA-Bottom-198
3 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	DIL28/PLCC32 ZIF EPROM
1 x	DIL44/TQFP44-3 ZIF
1 x	BGA-Bottom-145
1 x	BeeHive204
1 x	BGA-Bottom-13
1 x	BGA-Bottom-146
1 x	BGA-Bottom-199
1 x	BGA-Bottom-209
1 x	DIL40/PLCC68 ZIF DS87C550
2 x	Blade holders for DS 460
1 x	DIL48/TQFP100-2 ZIF PLD-1
1 x	BGA-Bottom-148
1 x	BGA-Bottom-201
1 x	DIL40/TQFP64 ZIF EM652X
1 x	DIL40/QFP64-2 ZIF-CS NEC-1
1 x	DIL32/PLCC84 ZIF HS3334ESCF1H
2 x	Broca de alta duração de 2.7mm
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	BGA-Bottom-141
1 x	DIL40/TQFP44 ZIF EM652X
1 x	DIL48/PQFP144 ZIF ST10-1
1 x	DIL40/QFP144 ZIF H8S-1
1 x	BGA-Bottom-214
1 x	DIL40/QFP64-1 ZIF-CS NEC-1
1 x	DIL40/PLCC68 ZIF AWM-1
1 x	Combi cutter 6.5/2.5mm
1 x	DIL32/QFP64 ZIF H8-1
1 x	BGA-Bottom-196
1 x	Broca de alta duração de 2.5mm
1 x	DIL40/PLCC52 ZIF DS87C530
1 x	DIL20/PLCC20 ZIF-CS
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	DIL48/PQFP100 ZIF PLD-1
1 x	BGA-Bottom-217
1 x	DIL40/PLCC44 ZIF AWM-1
1 x	Broca de alta duração de 0.9mm
1 x	DIL40/TQFP80-1 ZIF PIC-1A
1 x	DIL48/QFP100 ZIF PLD-3
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	broca de alta duração de 0,6mm
2 x	DIL28/PLCC28 ZIF-CS
1 x	DIL32/PLCC32 ZIF
2 x	DIL28/PLCC28 ZIF
2 x	BGA-Bottom-125
1 x	DIL48/QFP100 ZIF MB90F-1
1 x	DIL40/TQFP80-1 ZIF AWM-1
1 x	DIL44/MLF44-1 ZIF-CS
1 x	DIL40/QFP64 ZIF LPC-1
1 x	DIL48/PQFP100 ZIF ST10-1
2 x	DIL28/QFP52 ZIF-CS SX52
1 x	DIL48/QFP100 ZIF PLD-2
1 x	DIL32/PLCC32 ZIF-CS
1 x	DIL28/QFP64 ZIF H8/3644
1 x	BGA-Bottom-194
1 x	BGA-Bottom-131
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	Broca de alta duração de 1.3mm
1 x	DIL40/MLF64 ZIF-CS AVR-1
1 x	DIL40/QFP80 ZIF M37702
1 x	BGA-Bottom-147
1 x	BGA-Bottom-202
1 x	DIL40/QFP64-4 ZIF NEC-1
1 x	DIL48/PQFP80 ZIF M58BW-1
3 x	BeeHive208S
1 x	BGA-Bottom-132
1 x	BGA-Bottom-20
1 x	DIL40/PLCC52 ZIF MCS51-2
1 x	BGA-Bottom-204
1 x	DIL40/TQFP64 ZIF PIC-1A
1 x	DIL48/PQFP100 ZIF ST92Fxxx
1 x	DIL48/TQFP48-1 ZIF
1 x	BGA-Bottom-15
1 x	DIL32/PLCC32 ZIF-CS NOR-1
1 x	DIL48/QFP100 ZIF NEC-1
1 x	DIL40/TQFP64 ZIF AVRmega-2
1 x	BGA-Bottom-21
1 x	DIL48/QFP100 ZIF MSP430-1
1 x	Broca de alta duração de 0.5mm
1 x	DIL40/PLCC44 ZIF PIC-1
1 x	BGA-Bottom-212
1 x	Broca de alta duração de 2.4mm
2 x	DIL20W/PLCC20 ZIF
2 x	BGA-Bottom-10
1 x	DIL44/TQFP44-2 ZIF
1 x	DIL48/QFP100 ZIF PLD-4
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	BGA-Bottom-2
1 x	Broca de alta duração de 0.4mm
2 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	DIL40/TQFP52 ZIF EM652X
1 x	BGA-Bottom-14
1 x	DIL40/PLCC44 ZIF W-EPROM / MCS51
1 x	Broca de alta duração de 0.3mm
1 x	DIL8/SOT23-6 ZIF-CS PIC
1 x	DIL40/QFP64-3 ZIF NEC-1
1 x	DIL40/PLCC52 ZIF AWM-2
1 x	BGA-Bottom-144
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Broca de alta duração de 1.5mm
1 x	DIL40/QFP144 ZIF LPC-1
1 x	DIL40/PLCC52 ZIF AWM-1
1 x	DIL40/TQFP44 ZIF PIC-1
1 x	DIL48/QFP100 ZIF PLD-1
1 x	BGA-Bottom-216
1 x	High quality corundum grinding bits
1 x	Broca de alta duração de 1.1mm
1 x	Tool holder type H for SWH 1-A
1 x	DIL28/QFN28-2 ZIF-CS
1 x	lathe tools 12mm
1 x	quantum revolving center CM2
1 x	DIL8/QFN8-1 ZIF-CS
1 x	Cutting tool 16 mm
1 x	TU 1503V
1 x	lathe tools 8mm
1 x	Steady rest for D250X550
2 x	Hot wire cutter THERMOCUT 650
1 x	lathe tools 10mm
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	DIL42/SDIP42 ZIF 600mil
1 x	BGA-Bottom-101
1 x	BGA-Bottom-105
1 x	Quick-action tool holder kit SWH AA
1 x	DIL48/SDIP56 ZIF 68HC05Bx
1 x	Bottom PSOP44 NOR-1
1 x	Lathe tools 8mm pastilhados
1 x	DIL48/MQFP80 ZIF C500
1 x	Lathe tools 10mm pastilhados
1 x	DIL48/QFN48 ZIF-CS
1 x	Follow rest for D250X550
1 x	DIL40/MQFP52 ZIF ADuC812
1 x	Cutting tool 8 mm
1 x	DIL20/SOIC20 ZIF 300 mil
1 x	3-jaw chuck centrically clamping 125mm
1 x	Tool holder type D for SWH 1-A
1 x	Collet chuck ER25 for D250X550
1 x	BGA-Bottom-11
1 x	DIL44/QFN44-2 ZIF-CS
1 x	Beeprog2C
1 x	sanding belts for BBS/s Grit 80

€66,175.23