Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0245/0242

€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
    submodule
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	sanding belts for BBS/s Grit 150
2 x	Broca de alta duração de 0.5mm
1 x	lathe tools 12mm
4 x	lathe tools 10mm
1 x	Cutting tool 10 mm
1 x	Cutting tool HM 20 mm
1 x	ESD-handling ser 9-361
1 x	Three jaw chuck for the lathe DB 250
2 x	MICROMOT steel collet set
2 x	Broca de alta duração de 1.1mm
1 x	Radius Cutting Attachment, complete with pointed tool
2 x	Broca de alta duração de 0.3mm
1 x	Flexible polishing pad set
2 x	broca de alta duração de 0,6mm
2 x	Broca de alta duração de 1.0mm
2 x	Cotton polishers
2 x	Broca de alta duração de 0.7mm
1 x	Felt polishers
1 x	ESD-handling set
1 x	lathe tools 8mm
2 x	Broca de alta duração de 1.2mm
2 x	Broca de alta duração de 2.2mm
2 x	Broca de alta duração de 2.4mm
2 x	Lathe tools 10mm pastilhados
1 x	magnetic base 80kg
1 x	Broca de alta duração de 0.8mm
1 x	Broca de alta duração de 1.3mm
2 x	Broca de alta duração de 1.4mm
3 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
2 x	Fine dust paper filter for CW-matic
3 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Centre Turning Attachment
2 x	Broca de alta duração de 2.0mm
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Felt polishers
1 x	Flexible silicon discs
1 x	Flexible silicon discs
1 x	Cutting tool 16 mm
1 x	Fluted filter for CW-matic
1 x	Cutting tool 8 mm
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Collet Set for accurate use on round components
1 x	Flexible silicon discs
2 x	Cotton polishers
2 x	Broca de alta duração de 1.5mm
1 x	Broca de alta duração de 0.4mm
1 x	Self-adhesive silicone film for easy sanding disc replacement
2 x	Broca de alta duração de 2.5mm
1 x	Independent four jaw chuck for the DB 250
1 x	Felt polishers
1 x	Broca de alta duração de 0.9mm
1 x	BGA-Bottom-223
1 x	BGA-Bottom-217
1 x	Turning inserts WCMX050308F
2 x	Super-fine sanding discs grain 400
1 x	Replacement belts for BSL 220/E
1 x	BGA-Bottom-221
1 x	SCMT060204
1 x	BGA-Bottom-216
2 x	Supercut jig saw blades of special steel
1 x	Insert LGTN-2
1 x	Protective device for hand-operated MICROMOT
1 x	BGA-Bottom-222
1 x	SCMT09T304
1 x	Threading inserts 60º
2 x	BGA-Bottom-115
2 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Turning inserts VCMT070204
1 x	Threading inserts 60º
2 x	Belt sander BBS/S
1 x	TCMT110204
1 x	BGA-Bottom-229
1 x	BGA-0246/0243
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Bottom PSOP44 NOR-1
1 x	TCMT090204
1 x	Crocodile clip
2 x	BGA-Bottom-1
1 x	Earth wire
6 x	Professional set for finish grinding and polishing
3 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Wood Lathe DB900
1 x	Polishing felt, medium hard
1 x	BGA-Bottom-224
2 x	Jig saw blades made of HSS
2 x	Boring Bar for CCMT 16mm
2 x	Professional polishing sponge
1 x	Broca de ponto 3.15 x 1.25
2 x	Pensander PS 13
4 x	Super-fine sanding discs grain 000
3 x	TIP SPT-9
2 x	Wood Lathe DB450
1 x	BGA-Bottom-102
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	BGA-Bottom-8
1 x	BGA-Bottom-88
1 x	Turning inserts SCMT09T304
1 x	TIP SPT-10
2 x	Super-fine sanding discs grain 2000
1 x	Earth wire with dummy Schunko-plug
1 x	Replacement glue sticks for HKP 220
3 x	sclcr2525M12
1 x	BGA-Bottom-218
1 x	BGA-Top-3 ZIF-CS
3 x	Coarse-toothed (18 TPI per 25mm)
1 x	TIP SPT-4
1 x	Insert LGTN-3
1 x	BGA-Bottom-106
2 x	Grinding and Polishing Machine SP/E
1 x	Microfibre cloth
4 x	Cylinder sander WAS/E
2 x	Boring Bar for CCMT
1 x	Earthing module
1 x	Multipurpose Vices Primus 75
3 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	surface planing and thicknessing ADH 250
1 x	BGA-Top-132 ZIF-CS
2 x	Long neck angle grinder LHW
2 x	BGA-0246/0244
3 x	Blade holders for DS 460
1 x	Hot wire cutter THERMOCUT 230/E
3 x	BeeProg2
1 x	BGA-Bottom-5
1 x	BGA-Bottom-22
1 x	TU 1503V
2 x	BGA-0245/0243
1 x	Precision lathe PD 250/E
2 x	Replacement belts for BSL 220/E
3 x	Corundum fan sander for LWS
1 x	BGA-0245/0241
2 x	SCLCR1010E06
1 x	WCMT050308
2 x	Boring Bar for DCMT 10mm
1 x	TU 2404
1 x	Felt polishers
1 x	Lathe System PD 400
1 x	DCMT070204
2 x	BGA-Bottom-10
1 x	Threading inserts 60º
2 x	Disc Sander TG 250/E
1 x	BGA-Top-5 ZIF-CS
2 x	Replacement belts for BSL 220/E
2 x	BGA-Bottom-111
1 x	BGA-Bottom-231
1 x	TU 2004V
1 x	Turning inserts CCMT060204
2 x	BGA-Bottom-108
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
3 x	Delta sander OZI/E
1 x	Side cutters EUROline-Conductive
1 x	Brass brushes
2 x	Complete Engraving Kit with trial glass
1 x	Universal holder UHZ
4 x	Tungstein carbide rasp - and cutting disc
1 x	Mini side cutters EUROline-Conductive
1 x	Fibre-Cut Discs
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	Insert CCGT060202-AK
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Polishing paste
1 x	DCGT 070202F-AL
2 x	MICRO-screwdrivers
1 x	Wheels brushes
2 x	MICRO Heat gun MH 550
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	High quality corundum grinding bits
1 x	Steel brushes
1 x	ESD Brushe
1 x	Mini side cutters EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	Engraving tool GG
2 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
2 x	Router base OFV
1 x	End side cutters EUROline-Conductive
1 x	Stainless steel wheels
1 x	Cups brushes
1 x	BGA-Bottom-103
1 x	Steel cups
1 x	Insert CCGT120404-AK
1 x	Steel wheels
1 x	High quality corundum grinding bits
2 x	MICROFLAME burner MFB/E
1 x	Fibre-Cut Discs
1 x	Beeprog2C
1 x	Stainless steel brushes
1 x	ESD Brushe
1 x	End side cutters 45º EUROline-Conductive
1 x	Round nose pliers 45º EUROline-Conductive
1 x	MICROMOT glue gun HKP 220
1 x	EUROline-Conductive set of pliers
1 x	Diamond Cutting Discs
1 x	SmartProg2
1 x	BGA-Bottom-215
1 x	quantum revolving center CM2
1 x	ESD Tweezers 5-194
1 x	BGA-Bottom-194
1 x	Lathe chuck flange for D250X550
1 x	BGA-Bottom-204
2 x	Grinding mop cylinder grit 120
1 x	BGA-Bottom-208
1 x	BGA-Bottom-191
2 x	Polishing machine PM 100
1 x	BGA-Bottom-195
1 x	Quick-action tool holder kit SWH AA
2 x	Grinding mop cylinder grit 240
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	ESD Tweezers 5-193
1 x	Morse taper MT2 - B16
1 x	Insulation Resistance Tester MG500
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Grinding mop cylinder grit 120
1 x	BGA-Bottom-192
1 x	Tool holder type H for SWH 1-A
1 x	Tool holder type D for SWH 1-A
1 x	Collet chuck ER25 for D250X550
1 x	BGA-Bottom-199
1 x	6-piece socket wrenches ESD
1 x	BGA-Bottom-21
1 x	Conj 5 pinças ESD
1 x	Steady rest for D250X550
1 x	ESD Tweezers 5-191
1 x	Insulation Resistance Tester MG125
1 x	machine base with shelves for D250X550
2 x	Belt sander BS/E
1 x	centrically clamping 125mm
1 x	Follow rest for D250X550
1 x	Ceramic-tipped tweezers and ESD 5-095
1 x	3-jaw chuck centrically clamping 125mm
1 x	6-piece wrench key set ESD
1 x	BGA-Bottom-207
1 x	BGA-Bottom-214
1 x	Grinding mop cylinder grit 80
1 x	BGA-Bottom-209
1 x	BGA-Bottom-20
1 x	BGA-Bottom-2
1 x	6-piece TORX-screwdriver-set ESD
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	BGA-Bottom-198
1 x	Angle polisher WP/E
1 x	BGA-Bottom-202
1 x	4-jaw chuck individually clamping 125mm
1 x	ESD Tweezers 5-192
1 x	Parting tool 10mm
1 x	BGA-Bottom-212
1 x	6-piece set of ESD/EGB tweezers
1 x	Face clamping disc for D250X550
1 x	6-piece screwdriver and cross-recess set ESD
1 x	Collet chuck ER32 for D250X550
1 x	BGA-Bottom-196
1 x	BGA-Bottom-201

€33,882.00