Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0254/0241

€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
  Universal programmers
Service Case->

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Compact workshop vacuum cleaner CW-matic
1 x	MICROMOT glue gun HKP 220
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	MICROMOT Mains Adapter NG 2/S
1 x	MICRO-screwdrivers
1 x	Engraving tool GG
1 x	Router base OFV
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Grinding mop cylinder grit 80
3 x	sanding belts for BBS/s Grit 150
2 x	sanding belts for BBS/s Grit 80
2 x	sanding belts for BBS/s Grit 240
1 x	Complete Engraving Kit with trial glass
1 x	Five piece HSS chisel set
1 x	Spare cutting wire
1 x	Footswitch FS
2 x	Mini side cutters EUROline-Conductive
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
2 x	Crimping plier for BNC
2 x	Contact bracelet with spiral cord
1 x	Conj 5 pinças ESD
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Mini side cutters EUROline-Conductive
1 x	Aluminium Die-Cast
3 x	Boring Bar for DCMT 10mm
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
2 x	Boring Bar for CCMT
3 x	Parting tool 10mm
3 x	Boring Bar for CCMT 16mm
3 x	HSS cutting blade for OZI
2 x	Sanding pads for OZI 220/E grit 150
2 x	HSS immersion saw blades for OZI
2 x	HSS immersion saw blades for OZI
1 x	EUROline-Conductive set of pliers
2 x	Diamond cutting blade for OZI
1 x	Inspector mirror
1 x	DIL48/SSOP56 ZIF Flash-2
1 x	Glass fibre contact cleaner brush
1 x	Mini side cutters EUROline-Conductive
2 x	Sanding pads for OZI 220/E grit 80
1 x	DIL48/SSOP90 ZIF Flash-1
1 x	Inpection mirror 1-978
1 x	Sanding pads for OZI 220/E grit 240
1 x	DIL48/SSOP48 ZIF 300mil
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	DIL34/SSOP34 ZIF 200 mil
1 x	DIL48/SSOP70 ZIF OKI-1
1 x	DIL48/SSOP56 ZIF Flash-3
1 x	DIL44/SSOP44 ZIF 240mil
1 x	Glass fibre contact cleaner brush
1 x	IC tweezers
1 x	Hand magnifier with LED light 3X
1 x	Grinding mop cylinder grit 240
1 x	DIL48/SSOP56 ZIF Flash-1
1 x	MICROMOT drill stand MB 200
1 x	Hand Magnifier 2-293
1 x	Floor cover ESD
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Steel brushes
1 x	Cups brushes
1 x	Steel cups
1 x	Brass brushes
1 x	Metal Cutting Blades
1 x	Steel wheels
1 x	Milling cutter set (2 - 5mm)
1 x	Milling cutter set (6 - 10mm)
1 x	Earth wire
1 x	Earthing module
1 x	Wheels brushes
1 x	Stainless steel wheels
1 x	Top PSOP44 ZIF 600mil
1 x	Earth wire with dummy Schunko-plug
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Stainless steel brushes
1 x	Crocodile clip
1 x	Stainless steel cups
1 x	Flexible silicon discs
1 x	Polishing paste
1 x	Felt polishers
2 x	BGA-Bottom-111
2 x	DIL48/PQFP100 ZIF PLD-1
1 x	Cotton polishers
1 x	End side cutters 45º EUROline-Conductive
2 x	BGA-Bottom-10
1 x	Cotton polishers
2 x	BGA-Bottom-1
1 x	Felt polishers
2 x	BGA-Bottom-108
2 x	BGA-0246/0244
2 x	DIL48/PQFP144 ZIF ST10-1
1 x	Flexible silicon discs
1 x	Felt polishers
2 x	BGA-0245/0241
1 x	Flexible silicon discs
1 x	Flexible polishing pad set
2 x	BGA-Bottom-118
2 x	BGA-Bottom-126
2 x	DIL48/PQFP80 ZIF M58BW-1
1 x	Flexible polishing pad set
2 x	BGA-Bottom-115
1 x	Felt polishers
1 x	BGA-Bottom-102
1 x	Cotton polishers
1 x	BGA-Bottom-132
1 x	Screwdriver 2.5
1 x	BGA-Top-5 ZIF-CS
1 x	Combi cutter 6.5/2.5mm
1 x	Rounding over cutter 6.4mm
1 x	Rebating cutter 6.4mm
1 x	BGA-Bottom-138
1 x	Sanding bands 14x13mm
1 x	Tungsten carbide cutters set
1 x	Set of precision cutters
1 x	Wolfram vanadium steel milling bits
1 x	BGA-Bottom-131
1 x	Flap Wheels
1 x	BGA-Bottom-153
1 x	BGA-Bottom-225
1 x	Half round cutter 13mm
1 x	BGA-Bottom-5
1 x	Cross-recess Screwdrivers 1
1 x	BGA-Bottom-221
1 x	Slot cutter 5.0mm
1 x	Wolfram vanadium steel milling bits
1 x	BGA-Bottom-140
1 x	BGA-Bottom-9
1 x	BGA-Bottom-229
1 x	BGA-Bottom-15
1 x	10-piece wood router cutter set
1 x	BGA-Top-4 ZIF-CS
1 x	BGA-Bottom-150
1 x	Tungsten carbide cutter 1.0mm
1 x	Set of special steel cutters
1 x	DIL40/MLF64 ZIF-CS AVR-1
1 x	Disc cutters
1 x	BGA-Bottom-125
1 x	BGA-Bottom-149
1 x	BGA-Bottom-8
1 x	Cross-recess Screwdrivers 2
1 x	Screwdriver 1.2
1 x	BGA-0245/0243
1 x	Cone shaped milling cutter
1 x	BGA-Top-3 ZIF-CS
1 x	Angle cutter 45 °
1 x	BGA-Bottom-88
1 x	Flame shaped milling cutters
1 x	Screwdriver 1.5
1 x	Sanding Drums
1 x	BGA-Bottom-103
1 x	BGA-Bottom-154
1 x	Slot cutter 3.2mm
1 x	BGA-Bottom-147
1 x	Cross-recess Screwdrivers 000
1 x	BGA-Bottom-148
1 x	Edge cutter with pin 6.4mm
1 x	BGA-Bottom-223
1 x	Sanding Drums
1 x	BGA-Bottom-146
1 x	Solid carbide stylus for engraving
1 x	BGA-Bottom-101
1 x	Cylindrical cutters
1 x	BGA-Bottom-222
1 x	Cross-recess Screwdrivers 00
1 x	BGA-Bottom-224
1 x	BGA-Top-132 ZIF-CS
1 x	Sanding bands 14x13mm
1 x	Sanding Discs
1 x	Cross-recess Screwdrivers 2
1 x	Screwdriver 2.0
1 x	Sanding Drums
1 x	Screwdriver 1.8
1 x	Ball shaped milling cutters
1 x	BGA-Bottom-141
1 x	BGA-Bottom-135
1 x	Slot cutter 6.5mm
1 x	BGA-Bottom-139
1 x	Sanding Discs
1 x	Core box bit 3.2mm
1 x	Tungsten carbide cutter 3.0mm
1 x	BGA-Bottom-144
1 x	Tungsten carbide cutter 2.0mm
1 x	Nylon Fleece Brushes
1 x	Cylinder shaped milling cutters
1 x	Sanding Drums
1 x	BGA-Bottom-145
1 x	Cross-recess Screwdrivers 1
1 x	Flap Wheels
1 x	BGA-Bottom-14
1 x	BGA-Bottom-106
1 x	V-slot cutter 6.5mm
1 x	BGA-Bottom-231
1 x	BGA-Bottom-13
1 x	Solid carbide stylus for engraving
1 x	BGA-Bottom-199
1 x	BGA-Bottom-2
1 x	BGA-Bottom-207
1 x	BGA-Bottom-218
1 x	BGA-Bottom-214
1 x	ESD Tweezers 5-192

€16,538.29