Top » Catalog » Micromot tools » ACCESSORIES » Mains adaptor » 28704

€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Hot wire cutter THERMOCUT 230/E
MICROFLAME burner MFB/E	Spare cutting wire	Replacement cutting wire for the THERMOCUT 12/E

Categories

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Three jaw chuck for the lathe DB 250
2 x	Five piece HSS chisel set
2 x	Silicon-Carbide.
2 x	Special Fused Alumina (Hardness N).
1 x	Replacement glue sticks for HKP 220
2 x	Polishing Set
1 x	Diamond Coated
1 x	Diamond-coated cutting and roughing disc
2 x	Drill chuck with sliding sleeve for the tailstock
2 x	Independent four jaw chuck for the DB 250
1 x	Super-Cut
1 x	ESD-handling ser 9-361
1 x	Wheels brushes
1 x	sandpaper for PS 13 Grot 180
1 x	Blade holders for DS 460
1 x	machine base with shelves for D250X550
1 x	Flap Wheels
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Tool holder type D for SWH 1-A
1 x	Sanding Discs
1 x	Stainless steel brushes
1 x	Sanding Discs
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	sandpaper for PS 13 Grit 240
2 x	MICROMOT Mains Adapter NG 2/S
1 x	Stainless steel wheels
1 x	Sanding Drums
1 x	Brass brushes
1 x	Broca de alta duração de 3.0mm
1 x	IC tweezers
1 x	Cups brushes
1 x	Quick-action tool holder kit SWH AA
1 x	Sanding Drums
1 x	Flap Wheels
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Tool holder type H for SWH 1-A
1 x	Collet chuck ER25 for D250X550
1 x	Sanding Drums
1 x	Nylon Fleece Brushes
1 x	Steel cups
1 x	Sanding bands 14x13mm
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Steel brushes
1 x	Sanding bands 14x13mm
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Face clamping disc for D250X550
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Lathe chuck flange for D250X550
1 x	Coarse-toothed (10 TPI per 25mm)
2 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Follow rest for D250X550
1 x	sandpaper for PS 13 Grit 400
1 x	Steady rest for D250X550
1 x	Steel wheels
1 x	Sanding Drums
2 x	Collet chuck ER32 for D250X550
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Stainless steel cups

€2,206.99