€1,799.00 + VAT

Lathe System PD 400
[24400]

Lathe System PD 400

Lathe System PD 400

Lathe PD 400 is unequalled in its class. Don't waste your time if you are trying to find similar value for money.

Ideal for straight and cross cuts, taper turning, internal and external thread cutting slotting etc. Useable on materials such as steel, non-ferrous metals (aluminum, brass etc.). Negligible variances even under heavy loads.
Ground and hardened beds of ribbed construction for highest precision and stability. The wide range of accessories complements the lathe's functions. The bed is equipped with a milled surface for securing mill/drill PF 400.

  1. Supplied with change gears for thread cutting in 19 steps (0,2 - 3,0 mm). Clearly positioned and easy to change.
  2. Main switch with emergency stop function and restart protection.
  3. Quality, precision 3 jaw chuck with 100 mm capacity.
  4. Powerful capacitor motor with 550 W output.
  5. Quick-change tool post with 2 holders (fitted with adjustable height and stop).
  6. Includes MT2 rotating centre in tailstock.
  7. Easy to use hand wheel of aluminum with adjustable scale of steel. 1 division = 0.05 mm.
  8. Fully enclosed leadscrew with Acme thread (12 x 1.5).
  9. Cross-braced cast iron bed with wide, ground ways.
  10. Handwheel for quick support change.
  11. Switch for clockwise, off and counter-clockwise rotation.
  12. Selector for auto feed.
     

Technical Data:
Centre distance 400 mm, centre height 85 mm. The swing over the top slide is 116 mm (!). Solid, ribbed bed is made of quality cast iron with ground and hardened ways. Oversized spindle with 2 adjustable taper bearings, MT 3 taper and 20.5 mm bore. Run-out, without chuck, 5/1,000 mm.

The precision 3 jaw chuck has a capacity of up to 100 mm. Six spindle speeds are provided via belt drive: Level 1: 80 / 330 / 1,400 rpm; Level 2: 160 / 660 / 2,800 rpm. Powerful, quiet capacitor motor with 550 W output. All adjusting wheels fitted with scales that may be zeroed. 1 division = 0.05 mm. The auto feed has speed of 0.07 or 0.14 mm/rev.

An integrated gearbox with change gears provides 19 pitches: 0.2 - 0.25 - 0.3 - 0.35 - 0.4 - 0.45 - 0.5 - 0.6 - 0.7 - 0.75 - 0.8 - 0.9 - 1.0 - 1.25 - 1.50 - 1.75 - 2.0 - 2.5 - 3.0 mm. Imperial threads of 10 - 48 TPI are also possible. A rotating centre MK 2 and 10 mm MT 2 gear chuck are included. Cross slide travel 85 mm and topslide 55 mm. Swivels through 45° for taper turning. Toolstock with MT 2 (short), spindle travel 40 mm and Ø 24 mm. Supplied with scale. Approx. size 900 x 400 x 300 mm. Weight approx. 45 kg. For cutters of 10 x 10 mm.

Including individual quick-change holders.
 

Reviews
Manufacturers
1 x Brass contact cleaner brush
1 x ACCENT SERVICE TOOLS SET
1 x 6-piece set of ESD/EGB tweezers
1 x Crimping plier for BNC
1 x 6-piece TORX-screwdriver-set ESD
1 x 6-piece screwdriver and cross-recess set ESD
1 x 6-piece screwdriver set ESD
2 x Cross-recess Screwdrivers 0
1 x Morse taper MT2 - B16
1 x Screwdriver 2.0
1 x IT 200 - Indirect dividing attachment
1 x Screwdriver 1.2
2 x Cross-recess Screwdrivers 2
2 x TU 2404
2 x TU 2004V
1 x Screwdriver 1.5
2 x Cross-recess Screwdrivers 000
1 x Precision quick-action drill chuck 0-13mm B16
1 x Revolving center with replacement lathe centers
2 x TU 1503V
1 x Screwdriver 1.8
2 x Cross-recess Screwdrivers 00
2 x Cross-recess Screwdrivers 1
1 x Morse taper MT3 - B16
1 x precision machine vices FMS200
1 x Earthing module
1 x Earth wire
1 x quantum revolving center CM2
1 x quantum revolving center CM1
1 x Threading inserts 60º
2 x Cross-recess Screwdrivers 1
1 x Earth wire
1 x Turning inserts SCMT09T304
1 x OPTI BF20L VARIO
2 x Cross-recess Screwdrivers 2
1 x precision machine vices FMS100
1 x End milling cutter kit HSS 20 pcs
2 x TCMT090204
2 x Cross-recess Screwdrivers Pozidriv 2
1 x lathe tools 8mm
1 x Screwdriver 2.5
2 x Cross-recess Screwdrivers Pozidriv 1
1 x RT200 - Horizontal-vertical circular dividing table
1 x Crocodile clip
1 x Earth wire with dummy Schunko-plug
1 x Screwdriver 0.8
1 x Precision quick-action drill chuck 0-16mm B16
2 x Flat nose pliers 45º EUROline-Conductive
1 x ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x ESD Brushe
1 x Floor cover ESD
1 x Glass fibre contact cleaner brush
1 x ESD Brushe
1 x ESD Tweezers 5-192
1 x PLCC Puller
1 x PLCC Extractor
1 x IC tweezers
1 x EUROline-Conductive set of pliers
1 x Hand Magnifier 2-293
1 x ESD Tweezers 5-194
1 x Screwdriver 3.0
2 x Round nose pliers 45º EUROline-Conductive
1 x BIT-SET
1 x Inpection mirror 1-978
1 x magnifier 3.25 x Ø 45mm with additional lens
1 x Plastic magnifying glass
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Mini side cutters EUROline-Conductive
1 x Screwdriver 5.5
1 x Precision caliper square
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x ESD Tweezers 5-195
1 x Glass fibre contact cleaner brush
1 x Screwdriver 4.0
1 x PRECISION WIRE STRIPPER ESD-PLUS
1 x Snipe nose pliers 45º EUROline-Conductive
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x Mini side cutters EUROline-Conductive
1 x Hand magnifier with LED light 3X
1 x Screwdriver 5.5
1 x ESD Tweezers 5-193
1 x Inspector mirror
1 x ESD Tweezers 5-191
1 x Tungsten carbide cutter 1.0mm
1 x Three-jaw steel drill chuck
1 x Broca de ponto 3.15 x 1.00
1 x Cylindrical cutters
1 x Disc cutters
1 x Mill/Drill Unit BFB 2000.
1 x Mill/Drill System BFW 40/E
1 x Slot cutter 6.5mm
1 x MICROMOT extension cord. 300cm.
1 x Flap Wheels
1 x Tungsten Carbide Tipped (TCT)
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Precision steel vice PM 40
1 x Independent four jaw chuck for the DB 250
1 x sanding belts for BBS/s Grit 80
1 x Silicon-Carbide.
1 x Pensander PS 13
€14,611.38
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook