€30.89 + VAT

MICROMOT 50/E
[28510]

MICROMOT 50/E

Tested 100,000 times, these units speak for themselves.

The body diameter of only 35 mm makes it easy to handle. The weight of 230 g, quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design. The high quality steel collets ensure accurate clamping of the cutters. The size of the machine dictates a 12 V drive system, use of a transformer is required. MICROMOT transformers of at least 1 A are recommended.

Milling/Drilling machine MICROMOT 50/E

The thyristor electronic speed control enables the selection of speeds from 5,000 to 20,000 rpm. Phase angle control and feedback effect circuitry yield high torques, even at low speeds.

The MICROMOT standard 20mm collar allows use in the drill stand MB 140/S, router base OFV, stand UH 34 and angle adapter WS 90.Stable housing of fibreglass reinforced POLYAMIDE. With soft gripping area for extended use during hours.

  • For milling, drilling, routing, de-scaling, polishing, cutting, cleaning, sawing, engraving and more.
  • Useable on any workable material, e.g. steel, precious metals, glass, ceramics, plastics, precious stones etc.
  • Ideal for electronic hobbyists, model builders, tool and die makers, jewellers, opticians, artists, chiropractors, dental technicians and more.
  • 12 V supply allows the safe use of coolant, e.g. when grinding and cutting semi-precious stones!

 .

Six MICROMOT collets for shanks in the range 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm are supplied.

 

Spec.

  • Power consumption is 40 W
  • length 220 mm
  • weight approx. 230 g.
  • body diameter of only 35 mm
  • standard 20mm collar
  • Stable housing of fibreglass reinforced POLYAMIDE

Sold without power supply


Reviews

Customers who bought this product also purchased
Metal Cutting Blades
Metal Cutting Blades
Precision Vice FMZ
Precision Vice FMZ
MICROMOT Mains Adapter NG 2/S
MICROMOT Mains Adapter NG 2/S
Manufacturers
1 x Diamond Coated
2 x Sanding fleece for LWS
2 x Tungsten carbide drills Ø2mm
1 x Stainless steel wheels
1 x Diamond cutting blade for OZI
1 x Metal Cutting Blades
1 x Brass brushes
2 x Bench drill press TBH
1 x MICROFLAM gas soldering set MGS
1 x Super safety and specialty bit set, 75-piece
1 x Sanding fleece for LWS
2 x HSS drill bits 0.5mm
1 x HSS twist drill set with centring pin
1 x Cups brushes
1 x Stainless steel brushes
1 x Multipurpose Vices Primus100
2 x Tungsten carbide drills Ø1,5mm
1 x Steel cups
1 x Flap Wheels
1 x HSS twist drill set to DIN 338
1 x Super-fine sanding discs grain 2000
2 x HSS drill bits 1.0mm
1 x Replacement cutting disc for MICRO cutter MIC
2 x HSS drill bits 0.8mm
1 x Screwdriver bit set. 49-piece.
1 x Flexible silicon discs
1 x High quality corundum grinding bits
1 x Tungsten Carbide Tipped (TCT)
1 x HSS cutting blade for OZI
1 x 4-jaw chuck individually clamping 100mm
1 x Sanding bands 14x13mm
2 x Supercut jig saw blades of special steel
1 x Polishing Set
1 x Steel brushes
1 x Flexible silicon discs
1 x Steel wheels
1 x Diamond Cutting Discs
1 x Stainless steel cups
2 x HSS drill bits 1.6mm
1 x Conjunto de três brocas de ponto
2 x HSS drill bits 1.2mm
1 x Hot wire cutter THERMOCUT 650
2 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Super-Cut
1 x Thicknesser DH 40
1 x Sanding Discs
1 x Precision magnetic gauge stand
2 x Corundum grinding disc for LWS
1 x Hot wire cutter THERMOCUT 12/E
1 x sandpaper for PS 13 Grit 400
1 x Super-fine sanding discs grain 400
2 x Corundum bound cutting disc for LWS
1 x Lambswool polishing disc
1 x Nylon Fleece Brushes
1 x Corundum grinding disc for LWS
1 x Tungsten carbide drills Ø1mm
1 x Wheels brushes
1 x Precision steel vice PM 40
1 x 4-jaw chuck individually clamping 125mm
1 x Diamond Twist Drills
1 x 
2 x Collet Set for accurate use on round components
1 x Dial gauge
1 x Bench Circular Saw KS 230
1 x Angle polisher WP/E
1 x Pinça SOIC de 8 pinos
1 x 2-speed scroll saw DSH
1 x Aluminium Die-Cast
1 x Belt sander BS/E
1 x Blade for Steel and brass
1 x Centre Turning Attachment
1 x Band knife of hardened spring band steel (without teeth)
2 x Tool holder for rotary tools
1 x Inspector mirror
1 x IC Test clip 20 pins
1 x Four Jaw Chuck
1 x Handy 1515
1 x Radius Cutting Attachment, complete with pointed tool
1 x Diamond Cutting Discs
1 x Drill chuck with sliding sleeve for the tailstock
1 x Multipurpose Vices Primus 75
2 x 6pcs Double Open End wrench set
1 x End mill for aluminium 4mm
1 x ESD Brushe
1 x quantum revolving center CM2
1 x Jig saw blades made of HSS
1 x Hand Magnifier 2-293
1 x Cutting tool 16 mm
1 x magnifier 3.25 x Ø 45mm with additional lens
1 x Cutting tool HM 20 mm
1 x lathe tools 10mm
1 x Three piece thread cutting set
1 x Cutting tool 10 mm
1 x Ball shaped milling cutters
1 x Plastic magnifying glass
1 x lathe tools 12mm
1 x Hand magnifier with LED light 3X
1 x Precision quick-action drill chuck 0-10mm B16
1 x Precision caliper square
1 x lathe tools 8mm
1 x Lathe tools 8mm pastilhados
1 x Cutting tool 8 mm
1 x Safety insulated screwdrivers 14-608 VDE
1 x Replacement glue sticks for HKP 220
1 x Cylinder sander WAS/E
1 x Safety Insulated Pozidriv Screwdriver 14-644VDE
1 x Fixed Steady
1 x OPTI BF20 VARIO
1 x Corundum fan sander for LWS
1 x Safety insulated screwdrivers 14-606 VDE
1 x Corundum fan sander for LWS
1 x V-slot cutter 6.5mm
1 x Corundum sanding discs for LWS
1 x Rebating cutter 6.4mm
1 x Safety insulated screwdrivers 14-602 VDE
1 x Safety insulated screwdrivers 14-601 VDE
1 x Combi cutter 6.5/2.5mm
1 x Safety insulated screwdrivers 14-604 VDE
1 x Angle cutter 45 °
1 x Corundum sanding discs for LWS
1 x Slot cutter 3.2mm
€7,437.02
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook