Top » Catalog » Micromot tools » ACCESSORIES » Mains adaptor » 28704

€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Replacement cutting wire for the THERMOCUT 12/E
Hot wire cutter THERMOCUT 12/E	Hot wire cutter THERMOCUT 230/E	MICROFLAME burner MFB/E

Categories

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Cross-recess Screwdrivers 2
1 x	Cross-recess Screwdrivers 000
1 x	Cross-recess Screwdrivers 2
1 x	Screwdriver 2.5
2 x	Drill chuck with sliding sleeve for the tailstock
2 x	Mini side cutters EUROline-Conductive
1 x	Screwdriver 2.0
1 x	Cross-recess Screwdrivers 1
1 x	Screwdriver 1.8
2 x	Five piece HSS chisel set
1 x	Cross-recess Screwdrivers 1
1 x	Screwdriver 0.8
2 x	Three jaw chuck for the lathe DB 250
1 x	Cross-recess Screwdrivers 00
2 x	Mini side cutters EUROline-Conductive
1 x	Screwdriver 1.2
1 x	Screwdriver 1.5
1 x	Mini side cutters EUROline-Conductive
3 x	Replacement cutting disc for MICRO cutter MIC
3 x	Diamond-coated cutting disc for MIC
1 x	End side cutters EUROline-Conductive
1 x	Edge cutter with pin 6.4mm
1 x	Half round cutter 13mm
1 x	Slot cutter 3.2mm
1 x	V-slot cutter 6.5mm
1 x	10-piece wood router cutter set
1 x	Rounding over cutter 6.4mm
1 x	Slot cutter 5.0mm
1 x	Angle cutter 45 °
1 x	Core box bit 3.2mm
1 x	Slot cutter 6.5mm
1 x	Socket Wrenches 3.2
3 x	Grinding mop cylinder grit 80
1 x	Socket Wrenches 5.0
1 x	Wrench Keys 0.9
1 x	Socket Wrenches 2.0
1 x	Wrench Keys 1.5
1 x	Socket Wrenches 4.0
1 x	Socket Wrenches 4.5
1 x	Socket Wrenches 3.0
1 x	Socket Wrenches 5.5
1 x	Socket Wrenches 1.5
1 x	Socket Wrenches 3.5
1 x	Wrench Keys 1.3
1 x	Socket Wrenches 2.5
1 x	Wrench Keys 0.7
3 x	Blade for Wood and Plastics
1 x	Microfibre polishing wheel, 15-ply (100mm)
3 x	Diamond blade for MBS 240/E
1 x	Spiral blade. 125mm long with plain ends (without pins).
3 x	Band knife of hardened spring band steel (without teeth)
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
2 x	Extra narrow bandsaw blade (3.5mm) for tight radii
3 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Blade holders for DS 460
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Blade for Steel and brass
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x
1 x	Felt cloth polishing disc (100 x 15mm)
2 x	Multiform grindstone
1 x	Blade guides separately
2 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Universal and oil siphoning pump AP 12
1 x	Screwdriver bit set. 49-piece.
1 x	Super safety and specialty bit set, 75-piece
1 x	Replacement carving blades for MSG

€1,587.67