€395.00 + IVA

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Comentários

Categorias

Marcas

Informações

1 x	BGA-Bottom-171
1 x	BGA-Bottom-174
1 x	BGA-Bottom-166
2 x	Cintas de lixa grão 120 para BSL220/E
1 x	Ponta SPT-3
2 x	Cintas de lixa grão 180 para BSL220/E
1 x	Pinça para componentes 5-008
1 x	Pinça com pontas cerâmicas e ESD 5-095
2 x	Cintas de lixa grão 80 para BSL220/E
1 x	BGA-Bottom-173
1 x	BGA-Bottom-180
1 x	Ponta SPT-2
1 x	Ponta SPT-4
1 x	BGA-Bottom-170
1 x	BGA-Bottom-157
1 x	BGA-Bottom-164
1 x	BGA-Bottom-165
1 x	Ponta SPT-9
1 x	BGA-Bottom-16
1 x	Interreptor de pé FS
1 x	BGA-Bottom-177
1 x	BGA-Bottom-150
1 x	Fio de corte de reposição para Thermocut 230/E
1 x	BGA-Bottom-151
1 x	BGA-Bottom-167
1 x	Pedra perfilada para afiar formões.
1 x	Pincel ESD
1 x	BGA-Bottom-153
1 x	BGA-Bottom-19
2 x	Ponta SPT-10
1 x	BGA-Bottom-154
1 x	Tambor de lixa Grão 80
2 x	Disco de corte em corindo para LWS
1 x	Laminas sem pinos 41TPI
1 x	Boina de Polir em Microfibra
2 x	Boina de Polir em Musselina branqueada
1 x	Collet Set for accurate use on round components
1 x	Bottom PSOP44 NOR-1
2 x	Transformador MICROMOT NG 2/S 12V-2A
1 x	Veio Flexível 110/BF
1 x	Micro mesa de cordenadas KT 70
1 x	Boina de Polir em Musselina Tratada
1 x	Disco de corte reforçado
1 x	Fresas conicas
1 x	Lamina super-cut
1 x	Polidores em feltro com Ø 22mm
1 x	BGA-Top-5 ZIF-CS
1 x	Laminas sem pinos 50TPI
1 x	Veio Flexível 110/P
1 x	Tambor em velo
1 x	Transformador NG 2/E 12V-2A
1 x	Coluna Micromot MB 200
1 x	Disco de corindo lamelados grão 100 para LWS

€3,053.91