Top » Catalog » Lathes » Optimum Lathes » 3420310

€1,400.00 + VAT

TU 2004V
[3420310]

Convincing arguments: quality, efficiency and price

  • Stepless spindle speeds from 150 to 1,250 rpm and 300 to 2,500 rpm
  • Main spindle hardened and bedded in readjustable precision taper roller bearings
  • Hardened spindle nose (DIN 6350)
  • The tailstock may be shifted +/- 2.5 mm for taper turning
  • Wide threading range due to change gear kit
  • Taper roller bearings in P5 quality
  • Rolled trapezoid spindle
  • Thrust bearing
  • Leadscrew run on two porous bearings
  • Leadscrew for threading or automatic longitudinal feed
  • Induction-hardened and ground prismatic bed made from cast iron
  • All guideways adjustable without clearance due to adjustable gibs
  • Powerful, maintenance-free motor
  • Right and left hand motion with zero adjustment
  • Manufactured to DIN 8606 (toolmaker´s precision)
  • Cost-efficient, precise and of stable value
     

  • Main spindle hardened and bedded in adjustable precision taper roller bearings
  • Taper roller bearings in P5 quality
  • Cylindrical centring consumption, hardened spindle noose with a spindle hole of 21 mm
  • Change gear mechanism
  • Continuous speed control

  • Precision-machined slide
  • Handwheels with adjustable precision scaling
  • Quadruple tool holder
  • All guideways adjustable without clearance due to adjustable gibs
  • Rolled trapezoid spindle


  • Tailstock adjustable for taper turning
  • Tailstock sleeve and handwheel with adjustable precision scaling


  • Induction-hardened solid prismatic bed

 

Extent of supply:

  • 3-jaw chuck Ø 80 mm
  • Steady centre MT 2
  • Steady centre MT 3
  • Lathe chuck protection
  • Rear splash guard
  • Chip pan
  • Quadruple tool holder
  • Operating tools
  • Change gear kit

Technical data 
Motor power 600 W 230 V ~50 Hz
Center height 100 mm
Center width 300 mm
Turning diameter (max.) 200 mm
Ø circulation via slide 110 mm
Spindle speed 150 - 2,500 rpm
Number of steps 2 steps
Spindle taper  MT 3
Spindle hole 21 mm
Passage 3-jaw chuck 20 mm 
Bed width 100 mm
Top slide - travel 55 mm
Compound slide - travel 75 mm
Tailstock taper MT 2
Tailstock sleeve travel 65 mm
Longitudinal feed 0.1/0.2 mm/rev
Pitch - Metric (11) 0.5 - 3 mm/rev
Pitch - Inch (8) 44 - 10 threads/1“
Quadruple tool holder Seat height . 12 mm
Dimensions (L x W x H) 830 x 396 x 355 mm
Net weight 55 kg

 

Reviews
Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
  Acessories for OPTI D250X550
  Cutting tools->
  Optimum Lathes
  Optimum-Quantum accessories->
  Proxxon Lathes
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Service Case->
Torque Screwdriver
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x Cross-recess Screwdrivers Pozidriv 2
3 x Earth wire with dummy Schunko-plug
1 x Cross-recess Screwdrivers 0
1 x Mini side cutters EUROline-Conductive
2 x Cross-recess Screwdrivers 2
4 x Earthing module
2 x Cross-recess Screwdrivers 1
4 x Earth wire
2 x CRIMPING PLIERS/WIRE STRIPPER
2 x Conj 5 pinças ESD
3 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Side cutters EUROline-Conductive
1 x 6-piece screwdriver set ESD
1 x 6-piece socket wrenches ESD
1 x Brass contact cleaner brush
1 x Screwdriver 1.2
1 x 6-piece screwdriver and cross-recess set ESD
1 x Screwdriver 1.5
1 x Screwdriver 1.8
1 x Screwdriver 2.0
1 x ACCENT SERVICE TOOLS SET
3 x Replacement carving blades for MSG
1 x PLCC Extractor
2 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x Mini side cutters EUROline-Conductive
1 x Plastic magnifying glass
1 x Precision caliper square
1 x Socket Wrenches 3.2
1 x Socket Wrenches 4.0
1 x Wrench Keys 0.9
1 x Wrench Keys 0.7
1 x Wrench Keys 1.5
2 x Three piece thread cutting set
1 x Socket Wrenches 1.5
1 x Socket Wrenches 5.5
1 x Socket Wrenches 5.0
1 x Socket Wrenches 2.5
3 x Multiform grindstone
1 x Socket Wrenches 2.0
1 x Socket Wrenches 3.5
1 x Socket Wrenches 4.5
1 x Wrench Keys 1.3
1 x Socket Wrenches 3.0
2 x Supercut jig saw blades of special steel
3 x Lathe System PD 400
3 x Jig saw blades made of HSS
2 x Gear Chuck
3 x Tungsten tipped saw blade
5 x Vacum SAA 901
6 x Wood Lathe DB900
4 x Wood Lathe DB450
2 x Radius Cutting Attachment, complete with pointed tool
1 x surface planing and thicknessing ADH 250
3 x Four Jaw Chuck
3 x Crosscut 'Super-Cut' blade
5 x Table Saw TKS 2500 SC
5 x surface planing and thicknessing ADH 200
2 x STRIPPING TOOL WITH ADJUSTABLE KNIVES
4 x Belt sander BBS/S
3 x Table Sawr TKS 315 E
3 x Solid carbide saw blade
2 x Fixed Steady
2 x MICROMOT Mains Adapter NG 2/S
3 x Centre Turning Attachment
1 x Diamond blade
3 x Precision lathe PD 250/E
1 x Collet Set for accurate use on round components
1 x HSS boring tool set, 6 pieces
2 x Cutting tools of high quality cobalt HSS steel, ground
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Metal Cutting Blades
2 x Long neck angle grinder LHW
1 x HSS drill bits 1.2mm
3 x Grinding and Polishing Machine SP/E
1 x Fibre-Cut Discs
1 x Fibre-Cut Discs
3 x Delta sander OZI/E
1 x HSS drill bits 1.0mm
2 x Diamond Cutting Discs
2 x Replacement cutting wire for the THERMOCUT 12/E
2 x Tungstein carbide rasp - and cutting disc
2 x Diamond Cutting Discs
2 x Fibre-Cut Discs
1 x HSS twist drill set to DIN 338
2 x PRECISION WIRE STRIPPER ESD-PLUS
1 x Tungsten carbide drills Ø2mm
1 x Tungsten carbide drills Ø1mm
2 x Disc Sander TG 250/E
1 x Tungsten carbide drills Ø1,5mm
5 x Broca de alta duração de 2.1mm
1 x HSS twist drill set with centring pin
1 x Conjunto de três brocas de ponto
1 x Fibre-Cut Discs
1 x HSS drill bits 1.6mm
2 x Belt sander BS/E
1 x HSS drill bits 0.8mm
2 x Diamond Cutting Discs
2 x Hot wire cutter THERMOCUT 230/E
1 x Fibre-Cut Discs
3 x Crocodile clip
2 x Pensander PS 13
4 x Spiral blade. 125mm long with plain ends (without pins).
1 x Fibre-Cut Discs
2 x Disc Sander TG 125/E
1 x HSS drill bits 0.5mm
4 x Coarse-toothed (18 TPI per 25mm)
1 x Broca de alta duração de 2.8mm
3 x Broca de alta duração de 2.3mm
2 x Replacement cutting disc for MICRO cutter MIC
3 x Broca de alta duração de 1.1mm
2 x Angle polisher WP/E
2 x MICRO Miller FF 500
3 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Broca de alta duração de 3.0mm
2 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x Professional Drill/Grinder IBS/E
3 x Broca de alta duração de 2.4mm
2 x Broca de alta duração de 1.3mm
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x MICROMOT 50
4 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
3 x Broca de alta duração de 1.2mm
3 x Broca de alta duração de 0.3mm
3 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
4 x broca de alta duração de 0,2mm
1 x Bench drill machine TBM 220
1 x Broca de alta duração de 2.6mm
1 x Precision drill grinder FBS 12/EF
1 x Long neck angle milling/drilling unit LWB 220/E
2 x Broca de alta duração de 1.4mm
1 x MICROMOT 50/EF
3 x Broca de alta duração de 2.2mm
1 x MICROMOT 230/E
1 x Long neck straight drill/grinder LB/E
2 x Blade holders for DS 460
2 x Broca de alta duração de 2.0mm
1 x Bench drill press TBH
3 x Broca de alta duração de 2.5mm
1 x Mill/Drill System BFW 40/E
3 x Broca de alta duração de 0.5mm
3 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Broca de alta duração de 2.7mm
3 x Broca de alta duração de 1.5mm
1 x MICRO Miller MF 70
1 x Precision Drill/Grinder FBS 240/E
1 x Broca de alta duração de 2.9mm
1 x Polishing paste
1 x Broca de ponto 3.15 x 1.25
1 x Stainless steel wheels
2 x Contact bracelet with spiral cord
1 x Wheels brushes
1 x Core box bit 3.2mm
2 x Felt polishers
1 x Steel wheels
1 x Rebating cutter 6.4mm
1 x Stainless steel brushes
1 x Angle cutter 45 °
2 x ESD-handling set
1 x Flexible silicon discs
1 x Slot cutter 6.5mm
2 x ESD-handling ser 9-361
1 x Fluted filter for CW-matic
1 x Stainless steel cups
1 x Polishing machine PM 100
1 x Milling cutter set (2 - 5mm)
1 x magnetic base 80kg
1 x SCLCR1010E06
1 x Slot cutter 3.2mm
1 x V-slot cutter 6.5mm
1 x Half round cutter 13mm
1 x Rounding over cutter 6.4mm
1 x Fine dust paper filter for CW-matic
1 x 10-piece wood router cutter set
1 x Combi cutter 6.5/2.5mm
1 x Super-fine sanding discs grain 400
2 x Steel brushes
1 x Professional polishing sponge
1 x magnifier 3.25 x Ø 45mm with additional lens
1 x Slot cutter 5.0mm
1 x Corundum bound cutting disc for LWS
1 x Solid carbide stylus for engraving
1 x Earth wire
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x Insert CCGT060202-AK
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Coarse-toothed (25 TPI per 25mm)
1 x sanding belts for BBS/s Grit 240
1 x Flexible polishing pad set
2 x Hot wire cutter THERMOCUT 650
1 x Cotton polishers
1 x Steel cups
1 x Milling cutter set (6 - 10mm)
1 x BIT-SET
1 x Insert CCGT120404-AK
1 x Cups brushes
1 x Brass brushes
1 x Cutting tool HM 20 mm
1 x Lathe tools 8mm pastilhados
1 x Cutting tool 10 mm
1 x Diamond-coated cutting disc for MIC
1 x Grinding mop cylinder grit 80
1 x Diamond Twist Drills
1 x Crimping plier for BNC
1 x Lathe tools 10mm pastilhados
2 x Hot wire cutter THERMOCUT 12/E
1 x lathe tools 12mm
1 x Cutting tool 16 mm
1 x lathe tools 10mm
1 x lathe tools 8mm
1 x Ball-shaped diamond coated 3.2mm
1 x Diamond Grinding Bits 1mm
1 x Diamond Cutting Discs
1 x Broca de alta duração de 0.7mm
1 x Diamond Grinding Bits 1,8mm
1 x Broca de alta duração de 0.4mm
1 x Diamond Grinding Bits 5mm
1 x Saw blade made of high-alloy special steel
1 x Broca de alta duração de 1.0mm
1 x Diamond Grinding Bits 1,8mm
1 x Ball-shaped diamond coated 1.2mm
2 x Grinding mop cylinder grit 120
1 x Cutting tool 8 mm
1 x broca de alta duração de 0,6mm
1 x Broca de alta duração de 0.9mm
1 x Broca de alta duração de 0.8mm
1 x Face clamping disc for D250X550
1 x Tool holder type H for SWH 1-A
1 x Sanding pads for OZI 220/E grit 240
1 x TU 1503V
2 x Revolving center with replacement lathe centers
1 x Follow rest for D250X550
1 x Collet chuck ER32 for D250X550
1 x Steady rest for D250X550
1 x TU 2404
1 x Tool holder type D for SWH 1-A
1 x Lathe chuck flange for D250X550
1 x quantum revolving center CM1
1 x Quick-action tool holder kit SWH AA
1 x Collet chuck ER25 for D250X550
1 x machine base with shelves for D250X550
€47,637.26
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Optimum
- Other products
What's New?
Corundum fan sander for LWS
Corundum fan sander for LWS
€4.45
Languages
Portugues English
Share Product
Share on Facebook

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online