€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Manufacturers

Information

1 x	Universal and oil siphoning pump AP 12
3 x	Aluminium Die-Cast
1 x	Gear Chuck
1 x	Centre Turning Attachment
2 x	Flexishaft MICROMOT 110/BF
1 x	Dividing attachment TA 230 for PF 250
1 x	Multiform grindstone
1 x	Super safety and specialty bit set, 75-piece
3 x	Mill/Drill Unit BFB 2000.
3 x	Micro Compound Table KT 70
3 x	MICROMOT extension cord. 300cm.
2 x	Footswitch FS
2 x	Precision steel vice PM 40
1 x	Screwdriver bit set. 49-piece.
1 x	Replacement carving blades for MSG
1 x	Collet Set for accurate use on round components
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Disc Sander TG 250/E
1 x	MICROMOT Mains Adapter NG 5/E
2 x	Protective device for hand-operated MICROMOT
1 x	MICRO Miller MF 70
1 x	Delta sander OZI/E
1 x	Machine Vice MS 4
1 x	Precision Vice FMS 75
1 x	MICROMOT 50/E
1 x	MICROMOT 50
1 x	Multipurpose Vices Primus100
1 x	Professional Drill/Grinder IBS/E
1 x	Belt sander BS/E
2 x	Replacement cutting disc for MICRO cutter MIC
1 x	Bench drill machine TBM 220
1 x	Three-jaw steel drill chuck
2 x	MICROMOT steel collet set
1 x	Precision Vice FMZ
1 x	Grinding mop cylinder grit 120
1 x	Mill/Drill System BFW 40/E
1 x	Diamond-coated cutting disc for MIC
1 x	Tungsten Carbide Tipped (TCT)
1 x	MICROMOT 230/E
1 x	Multipurpose Vices Primus 75
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Cutting disc, with reinforcement
1 x	Precision drill grinder FBS 12/EF
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Grinding mop cylinder grit 240
1 x	Grinding and Polishing Machine SP/E
1 x	MICROMOT drill stand MB 200
1 x	Grinding mop cylinder grit 80

€4,149.31