€249.00 + VAT

Cutter head for copy and surface milling MT3
[3350213]

Cutter head for copy and surface milling “Made in Germany”

Universal insert to treat all steel and NE metals
For surface and copy milling
Made of special steel - highly coated
High surface and concentricity accuracy
Milling body with offset division for very smooth running and constant cutting
Base body and clamping shank form a unit, thus short projection length and stable tension
No additional milling plug-in mandrel is being used
Special geometry for milling at high speed
Economical, because the plate can be further turned with blunt cutter (can be used up to 12 times)
Incl. 5 indexable inserts RDET 1003 MOSN 8026 · Torx TX15

Technical data - MT 3
Number of cutters - 5
Outside diameter - 52 mm
Seat shaft - MT3/M12
Indexable inserts - Ø 10 mm
ISO designation - RDX. 1003 D52/R5

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Chuck for TBM 220
1 x	Slot cutter 6.5mm
1 x	Three jaw chuck for the lathe DB 250
1 x	sanding belts for BBS/s Grit 240
1 x	Universal holder UHZ
1 x	MICRO Heat gun MH 550
1 x	MICRO Miller FF 230
1 x	Cutting tool 16 mm
2 x	Compact workshop vacuum cleaner CW-matic
1 x	Rounding over cutter 6.4mm
1 x	Complete Engraving Kit with trial glass
1 x	3-jaw chuck centrically clamping 125mm
1 x	CM2 - B16 - M10
1 x	surface planing and thicknessing ADH 200
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Slot cutter 3.2mm
1 x	Rebating cutter 6.4mm
1 x	3-jaw chuck centrically clamping 160mm
1 x	centrically clamping 125mm
1 x	centrically clamping 100mm
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Blade for Wood and Plastics
1 x	Cutting tool HM 20 mm
1 x	V-slot cutter 6.5mm
1 x	Replacement belts for BSL 220/E
1 x	3-jaw chuck centrically clamping 80mm
1 x	Core box bit 3.2mm
1 x	Edge cutter with pin 6.4mm
1 x	MICROFLAM gas soldering set MGS
1 x	Cutter head for copy and surface milling MT3
1 x	10-piece wood router cutter set
1 x	sanding belts for BBS/s Grit 150
1 x	sanding belts for BBS/s Grit 80
1 x	3-jaw chuck centrically clamping 100mm
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Replacement belts for BSL 220/E
1 x	Cutting tool 8 mm
1 x	End milling cutter kit HSS 12 pcs
2 x	Engraving tool GG
1 x	Dial gauge
1 x	Three-jaw steel drill chuck
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Slot cutter 5.0mm
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Dividing attachment TA 230 for PF 250
1 x	Replacement glue sticks for HKP 220
1 x	MICRO-screwdrivers
1 x	Cutting disc, with reinforcement
1 x	Independent four jaw chuck for the DB 250
1 x	Universal and oil siphoning pump AP 12
1 x	Angle cutter 45 °
1 x	Cutting tool 10 mm
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Replacement belts for BSL 220/E
1 x	Diamond blade for MBS 240/E
1 x	surface planing and thicknessing ADH 250
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	4-jaw chuck individually clamping 125mm
1 x	IC tweezers
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Cutter head for copy and surface milling MT2
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Digital caliper gauge 300 mm
1 x	Blade guides separately
1 x	Combi cutter 6.5/2.5mm
1 x	Flap Wheels
1 x	DCMT070204
1 x	Half round cutter 13mm

€5,236.32