4-jaw chuck individually clamping 80mm, Oficina-digital.com

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Super-fine sanding discs grain 400
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Diamond-coated cutting disc for MIC
1 x	Cylinder sander WAS/E
1 x	BeeProg2
1 x	Beeprog2C
1 x	Professional set for finish grinding and polishing
1 x	Backing disc for LWS
1 x	Fine dust paper filter for CW-matic
1 x	Professional polishing sponge
1 x	Polishing felt, medium hard
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Cross-recess Screwdrivers 1
1 x	4-jaw chuck individually clamping 100mm
1 x	EUROline-Conductive set of pliers
1 x	Morse taper MT3 - B16
2 x	Safety Insulated Phillips Screwdriver 14-634VDE
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Dial gauge
3 x	IC Test clip 20 pins
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Five piece HSS chisel set
1 x	EUROline flat nose pliers
1 x	Safety Insulated Pozidriv Screwdriver 14-641VDE
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Micro Compound Table KT 70
1 x	3-jaw chuck centrically clamping 80mm
1 x	Replacement carving blades for MSG
2 x	Safety Insulated Phillips Screwdriver 14-631VDE
2 x	Mini side cutters EUROline-Conductive
1 x	Blade guides separately
2 x	End side cutters EUROline-Conductive
1 x	Boring Bar for DCMT 10mm
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Precision magnetic gauge stand
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
2 x	Grinding mop cylinder grit 240
2 x	End side cutters 45º EUROline-Conductive
1 x	Side cutters EUROline-Conductive
1 x	Protective device for hand-operated MICROMOT
1 x	Flexishaft MICROMOT 110/P
2 x	Round nose pliers 45º EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Insulation Resistance Tester MG500
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
1 x	Boring Bar for CCMT
1 x	4-jaw chuck individually clamping 125mm
1 x	TIP SPT-3
1 x	Precision quick-action drill chuck 0-16mm B16
1 x	Pinça SOIC de 8 pinos
1 x	3-jaw chuck centrically clamping 100mm
1 x	Diamond Coated
1 x	MICROMOT Mains Adapter NG 2/S
1 x	SCLCR1010E06
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	4-jaw chuck individually clamping 80mm
1 x	Boring Bar for CCMT 16mm
1 x	Three-jaw steel drill chuck
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	MICROMOT extension cord. 300cm.
1 x	Mini side cutters EUROline-Conductive
1 x	Supercut jig saw blades of special steel
1 x	Grinding mop cylinder grit 120
1 x	Grinding mop cylinder grit 120
1 x	Safety Insulated Pozidriv Screwdriver 14-644VDE
1 x	Morse taper MT2 - B16
1 x	Replacement belts for BSL 220/E
1 x	Replacement cutting wire for the THERMOCUT 12/E
2 x	Safety Insulated Pozidriv Screwdriver 14-642VDE
1 x	MICROMOT steel collet set
1 x	CM2 - B16 - M10

€4,809.25