€249.00 + VAT

Cutter head for copy and surface milling MT3
[3350213]

Cutter head for copy and surface milling “Made in Germany”

Universal insert to treat all steel and NE metals
For surface and copy milling
Made of special steel - highly coated
High surface and concentricity accuracy
Milling body with offset division for very smooth running and constant cutting
Base body and clamping shank form a unit, thus short projection length and stable tension
No additional milling plug-in mandrel is being used
Special geometry for milling at high speed
Economical, because the plate can be further turned with blunt cutter (can be used up to 12 times)
Incl. 5 indexable inserts RDET 1003 MOSN 8026 · Torx TX15

Technical data - MT 3
Number of cutters - 5
Outside diameter - 52 mm
Seat shaft - MT3/M12
Indexable inserts - Ø 10 mm
ISO designation - RDX. 1003 D52/R5

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	surface planing and thicknessing ADH 200
1 x	Corundum fan sander for LWS
2 x	Broca de alta duração de 2.6mm
1 x	MICRO Miller FF 230
1 x	Fine dust paper filter for CW-matic
1 x	Diamond-coated cutting disc for MIC
1 x	MICRO Miller MF 70
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	BIT-SET
1 x	MICRO Miller FF 500
1 x	Fluted filter for CW-matic
1 x	Router base OFV
1 x	Half round cutter 13mm
1 x	RT100 - Horizontal-vertical circular dividing table
2 x	Core box bit 3.2mm
2 x	Slot cutter 5.0mm
2 x	V-slot cutter 6.5mm
1 x	Threading inserts 60º
1 x	Wheels brushes
1 x	Steel brushes
1 x	Super safety and specialty bit set, 75-piece
2 x	Silicon-Carbide.
1 x	Steel cups
1 x	Threading inserts 60º
1 x	quantum revolving center CM2
1 x	Threading inserts 60º
1 x	Steel wheels
2 x	10-piece wood router cutter set
1 x	Precision quick-action drill chuck 0-16mm B16
1 x	TU 1503V
1 x	Vacum SAA 901
1 x	Stainless steel wheels
1 x	Stainless steel brushes
2 x	Rebating cutter 6.4mm
1 x	Edge cutter with pin 6.4mm
1 x	quantum revolving center CM1
2 x	Rounding over cutter 6.4mm
1 x	TU 2404
3 x	Angle cutter 45 °
1 x	Brass brushes
1 x	Combi cutter 6.5/2.5mm
1 x	Stainless steel cups
1 x	Precision quick-action drill chuck 0-8mm B16
2 x	Cutter head for copy and surface milling MT2
1 x	Revolving center with replacement lathe centers
1 x	Cups brushes
1 x	RT200 - Horizontal-vertical circular dividing table
1 x	Slot cutter 3.2mm
1 x	Turning inserts CCMT09T304
1 x	Turning inserts SCMT09T304
1 x	TCMT110204
1 x	RT150 - Horizontal-vertical circular dividing table
1 x	TU 2004V
1 x	MICRO-screwdrivers
1 x	Fixed Steady
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	3-jaw chuck centrically clamping 125mm
1 x	Tool holder for rotary tools
1 x	3-jaw chuck centrically clamping 160mm
1 x	Polishing Set
1 x	Four Jaw Chuck
1 x	3-jaw chuck centrically clamping 100mm
1 x	Cutting tool 10 mm
1 x	DCMT070204
1 x	Cutter head for copy and surface milling MT3
1 x	Corundum sanding discs for LWS
1 x	Diamond-coated cutting and roughing disc
1 x	4-jaw chuck individually clamping 80mm
1 x	Cutting tool HM 20 mm
1 x	4-jaw chuck individually clamping 125mm
1 x	Centre Turning Attachment
1 x	Gear Chuck
1 x	Cutting tool 16 mm
1 x	Special Fused Alumina (Hardness N).
1 x	Cutting tool 8 mm
1 x	Digital caliper gauge 300 mm

€12,251.74