Top » Catalog » Optimum » 3420310

€1,400.00 + VAT

TU 2004V
[3420310]

Convincing arguments: quality, efficiency and price

  • Stepless spindle speeds from 150 to 1,250 rpm and 300 to 2,500 rpm
  • Main spindle hardened and bedded in readjustable precision taper roller bearings
  • Hardened spindle nose (DIN 6350)
  • The tailstock may be shifted +/- 2.5 mm for taper turning
  • Wide threading range due to change gear kit
  • Taper roller bearings in P5 quality
  • Rolled trapezoid spindle
  • Thrust bearing
  • Leadscrew run on two porous bearings
  • Leadscrew for threading or automatic longitudinal feed
  • Induction-hardened and ground prismatic bed made from cast iron
  • All guideways adjustable without clearance due to adjustable gibs
  • Powerful, maintenance-free motor
  • Right and left hand motion with zero adjustment
  • Manufactured to DIN 8606 (toolmaker´s precision)
  • Cost-efficient, precise and of stable value
     

  • Main spindle hardened and bedded in adjustable precision taper roller bearings
  • Taper roller bearings in P5 quality
  • Cylindrical centring consumption, hardened spindle noose with a spindle hole of 21 mm
  • Change gear mechanism
  • Continuous speed control

  • Precision-machined slide
  • Handwheels with adjustable precision scaling
  • Quadruple tool holder
  • All guideways adjustable without clearance due to adjustable gibs
  • Rolled trapezoid spindle


  • Tailstock adjustable for taper turning
  • Tailstock sleeve and handwheel with adjustable precision scaling


  • Induction-hardened solid prismatic bed

 

Extent of supply:

  • 3-jaw chuck Ø 80 mm
  • Steady centre MT 2
  • Steady centre MT 3
  • Lathe chuck protection
  • Rear splash guard
  • Chip pan
  • Quadruple tool holder
  • Operating tools
  • Change gear kit

Technical data 
Motor power 600 W 230 V ~50 Hz
Center height 100 mm
Center width 300 mm
Turning diameter (max.) 200 mm
Ø circulation via slide 110 mm
Spindle speed 150 - 2,500 rpm
Number of steps 2 steps
Spindle taper  MT 3
Spindle hole 21 mm
Passage 3-jaw chuck 20 mm 
Bed width 100 mm
Top slide - travel 55 mm
Compound slide - travel 75 mm
Tailstock taper MT 2
Tailstock sleeve travel 65 mm
Longitudinal feed 0.1/0.2 mm/rev
Pitch - Metric (11) 0.5 - 3 mm/rev
Pitch - Inch (8) 44 - 10 threads/1“
Quadruple tool holder Seat height . 12 mm
Dimensions (L x W x H) 830 x 396 x 355 mm
Net weight 55 kg

 

Reviews
Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x Replacement belts for BSL 220/E
1 x Felt polishers
1 x Glass fibre contact cleaner brush
1 x sandpaper for PS 13 Grit 400
1 x sandpaper for PS 13 Grit 240
1 x Replacement belts for BSL 220/E
1 x Cotton polishers
1 x Replacement belts for BSL 220/E
1 x sandpaper for PS 13 Grot 180
2 x Ceramic-tipped tweezers and ESD 5-095
1 x MICROMOT steel collet set
2 x Cotton polishers
1 x Multipurpose Vices Primus 75
1 x Lathe tools 8mm pastilhados
2 x Cotton polishers
2 x Flexible silicon discs
2 x High quality corundum grinding bits
2 x Flexible silicon discs
1 x BeeHive204
2 x High quality corundum grinding bits
1 x ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x ESD Tweezers 5-192
3 x Sanding bands 14x13mm
1 x Broca de alta duração de 0.9mm
1 x Fibre-Cut Discs
2 x High quality corundum grinding bits
2 x Wheels brushes
2 x Flexible silicon discs
1 x Ceramic-tipped tweezers and ESD 5-096
2 x Sanding bands 14x13mm
2 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Broca de alta duração de 2.6mm
2 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Bottom PSOP44 NOR-1
1 x BeeHive208S
1 x ESD Tweezers 5-195
1 x ESD Tweezers 5-193
1 x Fibre-Cut Discs
2 x Cups brushes
2 x High quality corundum grinding bits
2 x High quality corundum grinding bits
1 x ESD Tweezers 5-191
2 x Stainless steel cups
2 x Angle cutter 45 °
3 x Blade holders for DS 460
2 x Stainless steel wheels
2 x Diamond Cutting Discs
1 x ESD Tweezers 5-194
1 x High quality corundum grinding bits
1 x High quality corundum grinding bits
2 x Steel cups
2 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
3 x Brass brushes
1 x Fluted filter for CW-matic
2 x Conj 5 pinças ESD
1 x Band knife of hardened spring band steel (without teeth)
2 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x High quality corundum grinding bits
2 x Stainless steel brushes
2 x Compact workshop vacuum cleaner CW-matic
1 x Fibre-Cut Discs
1 x Polishing paste
2 x Diamond Cutting Discs
1 x 6-piece set of ESD/EGB tweezers
1 x DIL20W/SOIC20 ZIF 300mil
1 x BGA-Bottom-1
1 x BGA-Bottom-101
1 x HSS immersion saw blades for OZI
1 x Diamond-coated cutting disc for MIC
1 x DIL32/SOIC32 ZIF 445mil
1 x surface planing and thicknessing ADH 250
1 x DIL14W/SOIC14 ZIF 150mil
1 x BGA-Bottom-126
1 x Tungsten carbide cutters set
1 x DIL40/SOIC16 ZIF MB-1
1 x BGA-Bottom-102
1 x HSS drill bits 1.0mm
1 x Tungsten carbide drills Ø1mm
1 x DIL40/SOIC20 ZIF MB95-1
1 x BGA-Bottom-127
1 x DIL28/TSSOP28 ZIF 170mil
1 x 6-piece wrench key set ESD
1 x DIL28W/SOIC28 ZIF 300mil
1 x 6-piece socket wrenches ESD
1 x Tungsten carbide drills Ø2mm
1 x Sanding pads for OZI 220/E grit 240
2 x Solid carbide stylus for engraving
1 x BGA-0246/0243
1 x BGA-Bottom-125
1 x Chuck for TBM 220
2 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x HSS twist drill set to DIN 338
1 x EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x Solid carbide stylus for engraving
1 x HSS drill bits 0.5mm
1 x DIL44/MLF44-1 ZIF-CS
3 x IC Test clip 20 pins
1 x DIL24/TSSOP24 ZIF 170mil
1 x Tungsten carbide cutter 1.0mm
1 x HSS drill bits 0.8mm
1 x Diamond-coated cutting and roughing disc
1 x surface planing and thicknessing ADH 200
1 x DIL18W/SOIC18 ZIF 300mil
1 x DIL16W/SOIC16 ZIF 300mil
1 x Disc cutters
1 x Tungsten carbide cutter 3.0mm
1 x PLCC Extractor
1 x BGA-Bottom-103
2 x Diamond cutting blade for OZI
1 x Diamond Grinding Bits 1mm
1 x Coarse-toothed (10 TPI per 25mm)
1 x DIL16W/SOIC16 ZIF 150mil
2 x Disc Sander TG 250/E
1 x Centre Turning Attachment
1 x Coarse-toothed (25 TPI per 25mm)
1 x Inpection mirror 1-978
1 x Belt sander BBS/S
1 x Diamond Grinding Bits 1,8mm
1 x Diamond Grinding Bits 5mm
1 x BGA-Bottom-115
1 x Diamond Grinding Bits 1,8mm
1 x Steel brushes
1 x 6-piece screwdriver set ESD
1 x Diamond Twist Drills
1 x DIL28/SOIC28 ZIF 330 mil
1 x DIL48/QFN48 ZIF-CS
1 x DIL32/MLF32-1 ZIF
1 x BGA-Bottom-111
1 x Complete Engraving Kit with trial glass
1 x Tungsten carbide drills Ø1,5mm
1 x Sanding pads for OZI 220/E grit 150
1 x BGA-0246/0244
1 x BGA-0245/0243
3 x Pinça SOIC de 8 pinos
1 x HSS immersion saw blades for OZI
1 x BGA-Bottom-105
1 x DIL44/SOIC44 ZIF-CS
1 x DIL40/VQFP64 ZIF AWM-1
1 x Diamond blade
1 x Coarse-toothed (18 TPI per 25mm)
1 x DIL20/SOIC20 ZIF 200mil
1 x BGA-Bottom-108
1 x MICROMOT 50/EF
1 x Ball shaped milling cutters
1 x 6-piece TORX-screwdriver-set ESD
1 x Delta sander OZI/E
1 x HSS twist drill set with centring pin
1 x Blade for Wood and Plastics
1 x BGA-0245/0242
2 x Cone shaped milling cutter
1 x DIL20/SOIC20 ZIF 300 mil
1 x DIL3/SOT23-3 ZIF-CS
2 x Conjunto de três brocas de ponto
1 x Wolfram vanadium steel milling bits
2 x Cylinder shaped milling cutters
1 x DIL28/QFN28-2 ZIF-CS
1 x DIL24W/SOIC24 ZIF 300mil
1 x HSS drill bits 1.6mm
1 x Sanding pads for OZI 220/E grit 80
1 x Flame shaped milling cutters
1 x Diamond blade for MBS 240/E
1 x Diamond Coated
1 x 6-piece screwdriver and cross-recess set ESD
1 x BGA-Bottom-118
1 x BGA-Bottom-106
1 x DIL44/QFN44-2 ZIF-CS
1 x Collet Set for accurate use on round components
2 x Grinding mop cylinder grit 120
1 x HSS drill bits 1.2mm
1 x BGA-Bottom-11
1 x Wood Lathe DB450
1 x Combi cutter 6.5/2.5mm
1 x TCMT090204
2 x 3-jaw chuck centrically clamping 100mm
1 x WCMT050308
1 x DIL48/PQFP100 ZIF ST92Fxxx
2 x 3-jaw chuck centrically clamping 80mm
2 x 4-jaw chuck individually clamping 100mm
2 x centrically clamping 100mm
2 x Morse taper MT2 - B16
2 x 3-jaw chuck centrically clamping 125mm
1 x Core box bit 3.2mm
2 x precision machine vices FMS200
1 x Turning inserts SCMT09T304
1 x Flap Wheels
1 x Crosscut 'Super-Cut' blade
1 x Corundum sanding discs for LWS
1 x Corundum bound cutting disc for LWS
1 x OPTI BF20L VARIO
1 x Threading inserts 60º
2 x 4-jaw chuck individually clamping 125mm
1 x Corundum grinding disc for LWS
1 x DIL48/PQFP100 ZIF ST10-1
2 x RT200 - Horizontal-vertical circular dividing table
1 x Corundum fan sander for LWS
1 x Vacum SAA 901
1 x Corundum grinding disc for LWS
2 x RT100 - Horizontal-vertical circular dividing table
2 x precision machine vices FMS125
1 x Nylon Fleece Brushes
1 x Dial gauge
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Sanding Discs
1 x DIL48/MQFP80 ZIF C500
1 x Cut off/mitre saw KGS 80
1 x Sanding Drums
1 x DIL48/PQFP80 ZIF M58BW-1
1 x Precision quick-action drill chuck 0-13mm B16
1 x 4-jaw chuck individually clamping 80mm
1 x Turning inserts VCMT070204
1 x Sanding Drums
1 x TCMT110204
1 x Cutting disc, with reinforcement
1 x Precision lathe PD 250/E
2 x RT150 - Horizontal-vertical circular dividing table
2 x Precision quick-action drill chuck 0-16mm B16
4 x precision machine vices FMS100
1 x Precision quick-action drill chuck 0-10mm B16
1 x IT 150 - Indirect dividing attachment
1 x Cylinder sander WAS/E
1 x Flap Wheels
1 x Sanding Drums
1 x Precision quick-action drill chuck 0-8mm B16
1 x Revolving center with replacement lathe centers
1 x DIL48/PQFP144 ZIF ST10-1
1 x Polishing felt, medium hard
1 x Sanding Drums
1 x Threading inserts 60º
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x TU 1503V
1 x Cutter head for copy and surface milling MT2
1 x TU 2004V
1 x precision machine vices FMS150
1 x TU 2404
€37,807.87
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Optimum
- Other products
What's New?
Super-fine sanding discs grain 000
Super-fine sanding discs grain 000
€3.82
Languages
Portugues English
Share Product
Share on Facebook

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online