Top » Catalog » Optimum » 3420330

€1,860.00 + VAT

TU 2404
[3420330]

quantum D 250 x 550 - Lathes for the demanding user

Convincing arguments: quality, efficiency and price

  • Precision-manufactured
  • Concentricity precision - lathe chuck smaller than 0.05 mm
  • Concentricity precision - spindle nose smaller than 0.009 mm
  • With saddle slide, compound slide and cross slide
  • Automatic longitudinal/leadscrew drive
  • Hardened work spindle with 2 adjustable taper roller bearings
  • Taper roller bearings in P5 quality
  • Rolled trapezoid spindle
  • Thrust bearing
  • Leadscrew run on two porous bearings
  • Leadscrew for threading or automatic longitudinal feed
  • Massive, matured prismatic bed may of grey cast iron, matured at least for six months inductively hardened (HRC 42-52) and precision-ground
  • User-friendly automatic off-switch according to IP 54 with low-voltage release, EMERGENCY-STOP button and right-handed/left-handed rotation
  • High-grade lathe chuck protection
  • Manufactured according to DIN 8606 (toolmaker’s precision)
  • High value stability
     

Extent of supply:

  • 3-jaw chuck Ø 125 mm
  • Fixed centre MT2
  • Fixed centre MT3
  • Lathe chuck protection
  • Lathe dog
  • HSS cutting tools
  • Rear splash guard
  • Chip pan
  • Quadruple tool holde
  • Operating tools
  • Change gear kit 10 pcs. from 0.4 to 3 mm and inch-based (10-44 TPI) thread
  • Test certificate

Technical data

Centre height 125 mm
Distance between centres 450 mm
Turning diameter (max.) 250 mm
Spindle hole 21 mm
Spindle taper MT 3
Spindle speeds 125 - 2,000 rpm
Number of steps 6
Pitch - Metric 0.4 - 3.5 mm/rev
Pitch - Inch 10 - 44 TPI
Longitudinal feeds 0.1 - 0.2 mm/rev
Top slide travel 70 mm
Cross slide travel  120 mm
Tailstock taper MT 2
Tailstock-sleeve travel  70 mm
Motor power  750 W 230 V ~50 Hz
Dimensions (L x W x H) 1020 x 520 x 560 mm
Net weight 125 kg

Reviews
Manufacturers
2 x Precision Vice FMZ
2 x Microfibre cloth
2 x Machine Vice MS 4
2 x Backing disc for LWS
2 x Lambswool polishing disc
2 x Super-fine sanding discs grain 2000
2 x Professional polishing sponge
2 x Drill chuck with sliding sleeve for the tailstock
3 x Precision steel vice PM 40
2 x Three jaw chuck for the lathe DB 250
2 x Treated muslin polishing wheel, stiff (100 x 15mm)
3 x Blade for Steel and brass
3 x Collet Set for accurate use on round components
1 x Independent four jaw chuck for the DB 250
1 x Motor-driven carving device MSG
3 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
3 x Diamond blade for MBS 240/E
1 x Scroll saw DS 230/E
1 x Thicknesser DH 40
3 x Radius Cutting Attachment, complete with pointed tool
2 x Four Jaw Chuck
3 x Tool holder for rotary tools
2 x Multipurpose Vices Primus 75
1 x MICRO Band Saw MBS 240/E
2 x Felt cloth polishing disc (100 x 15mm)
3 x Bandsaw blade of bimetal for MBS 240/E
3 x Gear Chuck
1 x Surface planer AH 80
3 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x Table Saw FET
3 x Footswitch FS
1 x Cut off/mitre saw KGS 80
1 x Universal polishing paste
1 x Jig saw STS 12/E
2 x Micro Compound Table KT 70
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Core box bit 3.2mm
1 x Slot cutter 5.0mm
2 x Super-fine sanding discs grain 000
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Super-fine sanding discs grain 400
1 x Rebating cutter 6.4mm
2 x Angle cutter 45 °
1 x V-slot cutter 6.5mm
1 x Half round cutter 13mm
1 x Edge cutter with pin 6.4mm
1 x Slot cutter 6.5mm
1 x Polishing felt, medium hard
2 x Professional set for finish grinding and polishing
1 x Slot cutter 3.2mm
1 x Rounding over cutter 6.4mm
2 x Blade guides separately
1 x Spare cutting wire
3 x Band knife of hardened spring band steel (without teeth)
1 x sanding belts for BBS/s Grit 150
1 x Blade for Wood and Plastics
1 x sanding belts for BBS/s Grit 240
1 x Sanding bands 14x13mm
1 x Lathe System PD 400
1 x High quality corundum grinding bits
1 x High quality corundum grinding bits
3 x Plastic magnifying glass
1 x Precision lathe PD 250/E
2 x OPTI BF20 VARIO
1 x High quality corundum grinding bits
1 x Sanding bands 14x13mm
1 x Broca de alta duração de 2.1mm
1 x High quality corundum grinding bits
1 x Blade holders for DS 460
1 x Broca de alta duração de 0.7mm
1 x surface planing and thicknessing ADH 250
1 x High quality corundum grinding bits
1 x Polishing paste
1 x Flexible silicon discs
1 x Stainless steel wheels
1 x Flexible silicon discs
1 x Felt polishers
1 x Felt polishers
1 x Felt polishers
1 x Grinding mop cylinder grit 120
1 x Tungstein carbide rasp - and cutting disc
1 x Corundum fan sander for LWS
1 x Wheels brushes
1 x Fluted filter for CW-matic
2 x IC tweezers
1 x Brass brushes
1 x Fine dust paper filter for CW-matic
1 x Broca de alta duração de 0.3mm
1 x Flexible polishing pad set
1 x MICRO Miller MF 70
2 x STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x Grinding mop cylinder grit 80
1 x Stainless steel brushes
1 x Steel wheels
1 x Grinding mop cylinder grit 120
1 x Cups brushes
2 x Wood Lathe DB900
1 x Compact workshop vacuum cleaner CW-matic
1 x Grinding mop cylinder grit 240
1 x Stainless steel cups
1 x Steel cups
1 x Diamond-coated cutting and roughing disc
1 x Flexible polishing pad set
1 x Flexible silicon discs
1 x Fibre-Cut Discs
1 x Lathe tools 8mm pastilhados
1 x Diamond Cutting Discs
1 x High quality corundum grinding bits
1 x Cotton polishers
1 x Fibre-Cut Discs
1 x Diamond Cutting Discs
2 x lathe tools 10mm
1 x Cotton polishers
1 x High quality corundum grinding bits
1 x Broca de alta duração de 3.0mm
1 x Felt polishers
1 x Fibre-Cut Discs
1 x Three-jaw steel drill chuck
1 x Protective device for hand-operated MICROMOT
1 x High quality corundum grinding bits
1 x Fibre-Cut Discs
1 x Steel brushes
1 x MICROMOT steel collet set
1 x Cotton polishers
2 x OPTI BF16 Vario
2 x OPTI BF20L VARIO
1 x Broca de alta duração de 0.5mm
1 x Broca de alta duração de 2.7mm
1 x Broca de alta duração de 2.2mm
1 x SCMT060204
1 x 3-jaw chuck centrically clamping 100mm
1 x RT200 - Horizontal-vertical circular dividing table
1 x Cutting tool 16 mm
1 x 3-jaw chuck centrically clamping 80mm
1 x 3-jaw chuck centrically clamping 125mm
1 x 3-jaw chuck centrically clamping 160mm
1 x Turning inserts SCMT09T304
1 x centrically clamping 125mm
1 x Precision quick-action drill chuck 0-8mm B16
1 x Revolving center with replacement lathe centers
1 x Threading inserts 60º
1 x TCMT110204
1 x 4-jaw chuck individually clamping 80mm
1 x Threading inserts 60º
1 x quantum revolving center CM1
1 x TCMT090204
1 x Cutting tool HM 20 mm
1 x quantum revolving center CM2
€22,496.37
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Optimum
Other products
Languages
Portugues English
Share Product
Share on Facebook