€34.50 + VAT

Hot wire cutter THERMOCUT 12/E
[27082]

Also for cutting free in thick Styrofoam sheets for Diorama model railway construction.

Other application areas: Architecture modelling, prototype construction, for designers, decorators, or for fine work on construction insulation. And of course for classical model building.

Stable frame with pivotable fixing element at top and extendable lower wire fixing. Maximum total extension 200mm. Maximum work piece height 150mm.

Cutting wire temperature infinitely variable. With a little practice, you can achieve optimum cuts depending on the material density and thickness. Usually at medium temperatures and without too much pressure. Heat-up time 1 second. Complete with five deformable cutting wires 285 x 0.85mm.

Cutting wires (285 x 0.85mm) can be shaped by hand or tongs to manufacture any profile.

Pivotable fixing element at top.

Extendable wire fixing for maximum extension of 200mm.

Cutting temperature infinitely variable.

Polarity-protected system plug for MICROMOT mains adapters.

Technical data:
12V. 60W. 50/60Hz. Cutting wire temperature controllable from approx. 150 - 350 °C. We recommend MICROMOT mains adapters as of a capacity of 2.0A for operation.

Reviews

Customers who bought this product also purchased

Angle polisher WP/E	MICRO Heat gun MH 550	MICROMOT Mains Adapter NG 2/S
MICROMOT glue gun HKP 220	Replacement cutting wire for the THERMOCUT 12/E	MICROMOT Mains Adapter NG 5/E

Shopping Cart

1 x	Solid carbide stylus for engraving
4 x	Tungsten carbide cutters set
1 x	Wolfram vanadium steel milling bits
1 x	Tungsten carbide cutter 3.0mm
2 x	Ball shaped milling cutters
1 x	Flame shaped milling cutters
1 x	Cone shaped milling cutter
1 x	Disc cutters
1 x	Solid carbide stylus for engraving
1 x	Wolfram vanadium steel milling bits
1 x	Tungsten carbide cutter 2.0mm
1 x	Set of special steel cutters
3 x	Diamond Cutting Discs
1 x	Half round cutter 13mm
1 x	High quality corundum grinding bits
1 x	Grinding mop cylinder grit 120
2 x	Ball-shaped diamond coated 1.2mm
2 x	Angle cutter 45 °
1 x	Fibre-Cut Discs
1 x	Fibre-Cut Discs
1 x	High quality corundum grinding bits
1 x	High quality corundum grinding bits
3 x	Diamond Cutting Discs
1 x	Core box bit 3.2mm
2 x	Diamond Cutting Discs
1 x	Fibre-Cut Discs
1 x	High quality corundum grinding bits
2 x	Diamond Grinding Bits 1,8mm
1 x	Combi cutter 6.5/2.5mm
2 x	Diamond Grinding Bits 5mm
1 x	High quality corundum grinding bits
3 x	Angle polisher WP/E
1 x	Fibre-Cut Discs
3 x	Diamond Cutting Discs
1 x	High quality corundum grinding bits
1 x	Diamond Grinding Bits 1mm
1 x	Milling cutter set (6 - 10mm)
3 x	Grinding and Polishing Machine SP/E
1 x	Rebating cutter 6.4mm
1 x	Fibre-Cut Discs
2 x	Polishing machine PM 100
2 x	Long neck angle grinder LHW
1 x	High quality corundum grinding bits
2 x	10-piece wood router cutter set
1 x	Slot cutter 5.0mm
1 x	Slot cutter 6.5mm
1 x	Metal Cutting Blades
1 x	Ball-shaped diamond coated 2.2mm
3 x	Ball-shaped diamond coated 3.2mm
1 x	Slot cutter 3.2mm
1 x	Milling cutter set (2 - 5mm)
2 x	Diamond Grinding Bits 1,8mm
3 x	Disc Sander TG 125/E
1 x	Diamond Twist Drills
1 x	Edge cutter with pin 6.4mm
1 x	V-slot cutter 6.5mm
1 x	High quality corundum grinding bits
1 x	Fibre-Cut Discs
1 x	Rounding over cutter 6.4mm
4 x	Belt sander BS/E
1 x	Round nose pliers 45º EUROline-Conductive
3 x	Cutting disc, with reinforcement
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	Polishing felt, medium hard
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	6-piece socket wrenches ESD
3 x	Lathe System PD 400
1 x	End side cutters EUROline-Conductive
2 x	BIT-SET
1 x	Mini side cutters EUROline-Conductive
1 x	ACCENT SERVICE TOOLS SET
2 x	Disc Sander TG 250/E
1 x	Cross-recess Screwdrivers 1
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	Replacement glue sticks for HKP 220
1 x	6-piece set of ESD/EGB tweezers
1 x	Cross-recess Screwdrivers 1
1 x	Three piece thread cutting set
3 x	Super-fine sanding discs grain 000
1 x	6-piece TORX-screwdriver-set ESD
3 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	ESD-handling ser 9-361
1 x	Screwdriver 1.5
1 x	Screwdriver 0.8
3 x	Lambswool polishing disc
1 x	Cross-recess Screwdrivers 000
1 x	6-piece wrench key set ESD
1 x	Brass contact cleaner brush
1 x	Screwdriver 1.8
1 x	ESD-handling set
1 x	6-piece screwdriver and cross-recess set ESD
2 x	Flat nose pliers 45º EUROline-Conductive
1 x	Cross-recess Screwdrivers 0
1 x	Side cutters EUROline-Conductive
2 x	Mini side cutters EUROline-Conductive
1 x	Screwdriver 2.0
1 x	Cross-recess Screwdrivers 2
1 x	Cross-recess Screwdrivers 00
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	Microfibre cloth
1 x	6-piece screwdriver set ESD
1 x	Screwdriver 1.2
1 x	Cross-recess Screwdrivers 2
3 x	Precision steel vice PM 40
2 x	Micro Compound Table KT 70
3 x	Four Jaw Chuck
1 x	Professional set for finish grinding and polishing
3 x	Bench drill press TBH
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
3 x	Radius Cutting Attachment, complete with pointed tool
3 x	Gear Chuck
1 x	Super-Cut
1 x	HSS cutting blade for OZI
1 x	Flexible silicon discs
2 x	Chuck for TBM 220
1 x	Sanding fleece for LWS
3 x	Centre Turning Attachment
2 x	Fixed Steady
1 x	Diamond cutting blade for OZI
1 x	Flexible silicon discs
1 x	Flap Wheels
2 x	Corundum bound cutting disc for LWS
2 x	Replacement cutting disc for MICRO cutter MIC
1 x	Flexible silicon discs
1 x	Tungsten Carbide Tipped (TCT)
1 x	Backing disc for LWS
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Blade for Steel and brass
2 x	Bench Circular Saw KS 230
1 x	Glass fibre contact cleaner brush
2 x	Aluminium Die-Cast
1 x	Glass fibre contact cleaner brush
1 x	Corundum fan sander for LWS
1 x	Corundum grinding disc for LWS
1 x	Tungstein carbide rasp - and cutting disc
1 x	Corundum fan sander for LWS
1 x	Hand magnifier with LED light 3X
1 x	Inpection mirror 1-978
1 x	Mini side cutters EUROline-Conductive
1 x	Tool holder for rotary tools
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Thicknesser DH 40
1 x	Diamond-coated cutting and roughing disc
1 x	Precision lathe PD 250/E
1 x	Pensander PS 13
1 x	14-piece parallel supports set

€15,389.65