€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Fixed Steady
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Tungsten Carbide Tipped (TCT)
3 x	Collet Set for accurate use on round components
1 x	Side cutters 180mm
1 x	MICROMOT drill stand MB 200
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	MICROMOT tool holder
1 x	Aluminium Die-Cast
1 x	sandpaper for PS 13 Grit 400
2 x	Protective device for hand-operated MICROMOT
2 x	Mill/Drill Unit BFB 2000.
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Centre Turning Attachment
1 x	Footswitch FS
1 x	sandpaper for PS 13 Grot 180
2 x	Super-Cut
1 x	BIT-SET
1 x	Four Jaw Chuck
1 x	Gear Chuck
1 x	sandpaper for PS 13 Grit 240
3 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
3 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Flexishaft MICROMOT 110/P
2 x	MICROFLAME burner MFB/E
3 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	14-piece parallel supports set
1 x	Micro Compound Table KT 70
1 x	Tungstein carbide rasp - and cutting disc
1 x	Diamond blade
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	Five piece HSS chisel set
2 x	Replacement belts for BSL 220/E
2 x	DIL44/SOIC44 ZIF-CS
2 x	DIL40/SOIC20 ZIF AWM-1
1 x	Corundum sanding discs for LWS
1 x	Crosscut 'Super-Cut' blade
1 x	Saw blade made of high-alloy special steel
2 x	Replacement cutting disc for MICRO cutter MIC
2 x	DIL18W/SOIC18 ZIF 300mil
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Solid carbide saw blade
1 x	Independent four jaw chuck for the DB 250
2 x	DIL24W/SOIC24 ZIF 300mil
1 x	Diamond-coated cutting and roughing disc
1 x	Corundum grinding disc for LWS
2 x	Blade holders for DS 460
1 x	Replacement belts for BSL 220/E
2 x	DIL16W/SOIC16 ZIF 300mil
1 x	VIDEOCLEAN 200ml
2 x	Coarse-toothed (18 TPI per 25mm)
2 x	Coarse-toothed (25 TPI per 25mm)
2 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Corundum grinding disc for LWS
2 x	DIL3/SOT23-3 ZIF-CS
1 x	Backing disc for LWS
1 x	CD-CLEANER 200ml
2 x	Corundum bound cutting disc for LWS
1 x	Three jaw chuck for the lathe DB 250
1 x	Replacement belts for BSL 220/E
1 x	DIL16/SOIC16 ZIF 200 mil
1 x	Tungsten tipped saw blade
2 x	DIL20/SOIC20 ZIF 300 mil
1 x	Grinding mop cylinder grit 120
2 x	DIL14W/SOIC14 ZIF 150mil
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Special Fused Alumina (Hardness N).
2 x	DIL40/SOIC16 ZIF MB-1
2 x	DEGRESER 200ml
1 x	Corundum fan sander for LWS
1 x	Grinding mop cylinder grit 80
2 x	Sanding fleece for LWS
1 x	Corundum fan sander for LWS
1 x	Broca de alta duração de 2.2mm
1 x	DIL20/SOIC20 ZIF 200mil
1 x	Broca de alta duração de 0.8mm
1 x	Broca de alta duração de 2.5mm
1 x	Broca de alta duração de 0.7mm
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	Broca de alta duração de 0.4mm
1 x	Sanding fleece for LWS
1 x	EUROline flat nose pliers
1 x	broca de alta duração de 0,6mm
2 x	Broca de alta duração de 0.9mm
1 x	Lambswool polishing disc
1 x	Broca de alta duração de 1.5mm
1 x	Flexible silicon discs
1 x	broca de alta duração de 0,2mm
1 x	Steel tape measure
1 x	DIL28W/SOIC28 ZIF 300mil
1 x	DIL32/SOIC32 ZIF 445mil
1 x	Broca de alta duração de 2.3mm
1 x	Flexible silicon discs
1 x	Broca de alta duração de 1.4mm
1 x	Broca de alta duração de 1.0mm
1 x	Super-fine sanding discs grain 2000
1 x	Broca de alta duração de 1.2mm
1 x	DIL28/TSSOP28 ZIF 170mil
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Bench drill press TBH
1 x	HSS cutting blade for OZI
1 x	Slot cutter 5.0mm
1 x	MICRO Miller FF 230
2 x	DIL8/SOT23-6 ZIF-CS PIC
2 x	Core box bit 3.2mm
1 x	Glass fibre contact cleaner brush
2 x	Combination pliers 160mm
1 x	End mill for aluminium 4mm
2 x	10-piece wood router cutter set
1 x	Angle cutter 45 °
1 x	Cutting tool 10 mm
1 x	Sanding bands 14x13mm
1 x	Flap Wheels
1 x	Sanding Drums
1 x	4-jaw chuck individually clamping 100mm
1 x	CM2 - B16 - M10
1 x	Sanding Drums
1 x	Cutting tool 16 mm
1 x	Tungsten carbide cutters set
1 x	Sanding bands 14x13mm
1 x	End milling cutter kit HSS 12 pcs
1 x	Cutting tool 8 mm
1 x	Digital caliper gauge 300 mm
1 x	Sanding Discs
1 x	Sanding Drums
1 x	MICROFLAM gas soldering set MGS
1 x	centrically clamping 125mm
1 x	3-jaw chuck centrically clamping 160mm
2 x	Sanding Discs
1 x	4-jaw chuck individually clamping 125mm
1 x	Cutter head for copy and surface milling MT3
1 x	3-jaw chuck centrically clamping 100mm
1 x	Flap Wheels
2 x	Sanding Drums
1 x	3-jaw chuck centrically clamping 80mm
1 x	Cutter head for copy and surface milling MT2
1 x	centrically clamping 100mm
1 x	Cutting tool HM 20 mm
1 x	DCMT070204
1 x	Dial gauge
1 x	Compact workshop vacuum cleaner CW-matic
1 x	V-slot cutter 6.5mm
1 x	Milling cutter set (2 - 5mm)
1 x	Half round cutter 13mm
1 x	ANTISTATIC 200ml
1 x	Fibre-Cut Discs
1 x	Cone shaped milling cutter
1 x	Wolfram vanadium steel milling bits
1 x	Edge cutter with pin 6.4mm
1 x	Blade guides separately
1 x	Fibre-Cut Discs
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	SCREEN 200ml
1 x	POLISHER 200ml

€10,444.71